Launching a new smart TV Xiaomi TV A Series usually does not cause difficulties, but modern models have their own power management features. the owner may face a situation when the device does not respond to the pressing of the usual buttons or the indicator does not light up. Understanding the logic of the Android TV or Google TV system will help quickly activate the screen.
In this article, we will discuss all possible ways to activate the display, from standard procedures to forced start methods, pay special attention to the nuances of working with the remote control, since it is the main tool for interacting with the interface, and consider situations where you need to simultaneously press the power buttons and menus to exit deep sleep.
If you've just unpacked your device or it's been off for a long time, the algorithm might be different, it might have gone into power saving mode or it might have needed initial setup, and let's go through all the steps of turning on your Smart TV.
Location of control buttons on the body
The first thing to do before looking for a remote is to look at the TV body itself. In the Xiaomi TV A series, manufacturers often hide the physical power button to preserve the minimalist design of the front panel, which can be located at the bottom of the center, under the Mi logo, or be shifted to the right/left.
In some versions, especially in the models of 2022 and 2023, there may not be a separate "Power" button on the case at all. Instead, a multifunction joystick or touch button hidden behind a decorative frame is used.
- 🔍 Carefully examine the lower face of the body, swiping your finger along the frame - the button may be barely noticeable.
- 🖐 Try a light touch or a stronger press if you use a sensory mechanism.
- 🔦 Use your phone’s flashlight to highlight areas around the logo where infrared receivers and buttons often hide.
⚠️ Warning: Don't put too much effort into pressing the plastic elements of the case.If the button doesn't get squeezed, you may have found a decorative element rather than a control.
If you find a button, a short press should start the boot process. If there is no reaction, check the connection of the power cable to the outlet. The status indicator (usually a small LED) should be lit red when turned off, signaling the presence of voltage in the network.
Using the Xiaomi Remote remote
The main way to turn on the Xiaomi A Series TV is a remote control. The kit can come in different versions: a classic IR remote or a modern Bluetooth remote with voice control.
A classic remote sends a signal directly to an infrared receiver, and you point it at the top of the screen towards the bottom of the screen where the sensor is located. Hold the power button (red circle) for about 1-2 seconds. If the TV doesn't turn on, check the batteries — even if they are new, oxidized contacts can interfere with signal transmission.
The Bluetooth remote is more complicated because it requires pre-pairing, but most Xiaomi models are programmed to have the power button on the Bluetooth console running through the IR channel even before mating.
- 🔋 Make sure there is a protective insulation film between the power button and the battery in the remote compartment - it needs to be removed.
- 📡 Direct the remote control strictly to the receiver area on the TV from a distance of no more than 1 meter.
- 🔄 Try pressing the home button or the menu button, sometimes they duplicate the turn on function.
Importantly, if the TV is in deep sleep, the Bluetooth signal may not wake the device, in which case only a button on the case or a remote app on the smartphone will help if the TV is connected to Wi-Fi.
Initial launch after purchase
If you’ve just unpacked the Xiaomi TV A Series, simply pressing the power button may not be enough to get started.The device may be in transport mode or require language and region confirmation. Once the power cable is connected, the indicator may flash or burn a certain color.
When you first turn on, the system triggers the original setup wizard, the screen can light up with the Android or Google logo, and then the welcome window will appear. At this point, the remote must be already paired. If you see the logo, but nothing happens, you may need to connect to the network.
The initial activation process involves several steps:
- Selection of the interface language and region of residence.
- Connect to a Wi-Fi or Ethernet cable wireless network.
- Acceptance of the user agreement and setting the date/time.
- Log in to a Google account to access the app store.
☑️ Checklist of first inclusion
Sometimes you may see a message on the screen that you need to update the software. Don't miss this step, as the factory firmware may contain errors that affect the stability of the work.
Standby modes and quick start
Modern Xiaomi TVs use advanced power saving algorithms, so when you turn off the TV with the remote, it doesn't turn off completely, but goes into Standby mode, in which the processor continues to work in the background, waiting for commands or updates.
Quick Start allows the TV to turn on almost instantly, but if the device wakes up from deep sleep, it may take longer to boot up, and you can change the behavior of the shutdown button in the system settings.
To manage these parameters, go to the menu:
Settings → Device and applications → Energy saving → ShutdownOptions are available here:
- 💤 Quick Start Mode: TV shuts down but stays connected to network for fast commands.
- 🔌 Shutdown: The device consumes minimal energy, but switching on takes longer.
- ⏰ Schedule: Automatic on or off by timer.
⚠️ Attention: If you use fast start mode, the TV can heat up when turned off and consume more electricity.
Understanding the difference between these modes is important, because if the TV doesn't turn on for a long time, it might be stuck in the background, and then completely shutting down would help.
Why do you need a full shutdown?
What to do if the TV is not turned on
When the light is on but the screen is black, or when the TV is not responding at all, it requires a systematic approach. Often the problem is not a breakdown of the matrix, but a software failure or static electricity. First of all, try to perform a power reset cycle.
Algorithm of actions during "hang":
- Pull the power cord out of the socket.
- Wait at least 60 seconds (this is important for the discharge of capacitors).
- Press and hold the power button on the TV body (not the remote) for 15-20 seconds while it is offline.
- Turn the TV on and try to start it.
If the light flashes red or orange, it's a specific error signal. Blinking codes can vary depending on the Xiaomi A Series model. For example, three short blinks can indicate a software update problem, and constant blinking can indicate an overheating or board failure.
| Status of the indicator | Probable cause | Action. |
|---|---|---|
| Burning red. | Normal Standby (Standby) | Press the power button |
| Blinks white | Update or download is in progress | Wait, don't turn it off. |
| It's not burning. | No power or block malfunction | Check the socket and cable |
| Blinks red. | System error or overheating | Perform a power drop |
💡
Use the Mi Remote app or Google Home on your smartphone. If your phone and TV are on the same Wi-Fi network, you can try turning on the TV through your smartphone screen even if the remote is lost.
Using a Smartphone as a Remote
If the physical remote is lost or faulty, a smartphone is a great solution. There are several effective ways to control the Xiaomi TV A Series with Android TV or Google TV.
The official Google Home app allows you not only to manage media, but also to turn your device on/off if it is connected to the same network. You can also use specialized remote applications that emulate an IR signal if your phone has an IR port (for example, in Xiaomi smartphones).
Instructions for connection:
- Make sure your phone is connected to the same Wi-Fi network as your TV (if the TV was previously on).
- Download the Google Home or Xiaomi Remote app.
- Start a device search and select your TV from the list.
- Confirm the pairing with the code that appears on the screen (if TV is on).
This method is especially useful when you need to type text to search or navigate through menus, since a virtual keyboard on your phone is more convenient than typing from the remote, and some applications allow you to broadcast the phone screen to the TV, which also activates the TV screen.
💡
Smartphone with an infrared port is the most reliable alternative to a lost remote, as it does not require pre-configuration of the network and works even if the TV is turned off.