The first turn on the Xiaomi TV from the remote: instructions for beginners

You just bought a Xiaomi TV, whether it’s a Mi. TV 4A, Mi TV 5 Pro or Redmi Smart TV — And you're standing in front of the box asking, "How do you turn it on the right way the first time?" Many users are facing confusion at this point, especially if they haven't dealt with the brand's smart tech before. Unlike traditional TVs, Xiaomi devices require not only a physical connection to the network, but also initial configuration through the remote control, which often has a custom button layout.

In this article, we will take you through the first turn on Step-by-step, from unpacking to the appearance of the main screen, you will learn which buttons to press on the remote in the correct sequence, how to avoid typical errors (for example, hanging on the Mi logo), and what to do if the TV does not respond to commands.

If you've tried to turn on the TV, but it's stuck in the booting phase or it makes a mistake, don't panic. At the end of the article, there's a section on solutions to some of the most common problems. FAQ We've added interactive checklists and spoilers with additional information to help you keep important details in mind.

Preparing for the first turn on: what to do before pressing the buttons

Before you grab the remote, make sure you follow the preparatory steps, which can cause the TV to malfunction or even damage, starting with the obvious: unpacking and placement.

Xiaomi TVs come in sturdy boxes with foam inserts. Remove the device carefully, holding the edges of the screen (but not the screen itself!). Put the TV on a flat soft surface, such as a table covered with a towel. Do not put the TV screen down on a hard surface (glass, metal) - this can damage the matrix due to uneven weight distribution. If the model supports a wall mount, check the kit for the presence of a bracket (in most cases, you need to buy it separately).

Next, the power connection. Make sure the power outlet is in good working order and meets the requirements of the TV (usually this is the case). 220–240 V, 50/60 Hz! Power cable, tightly but effortlessly, it should be fixed with a click. Don't use low-quality extension cords or tees: Xiaomi TVs are sensitive to voltage surges.

• 📦 Unpacking: Get your TV, remote control (usually in a separate compartment of the box), batteries for the remote (can be put in a package with documents).
• 🔌 Power: connect the cable to the TV and the socket. Do not turn on the network until all connections are completed!
• 📶 Antenna/Cables: If you plan to watch TV on air, connect the antenna cable to the connector RF IN. For Smart. TV-The functions will be sufficient Wi-Fi.
• 🔋 Batteries in the remote: install the batteries (usually 2) × AAA) You can see the polarity!

⚠️ Warning: If the Xiaomi TV was delivered during the cold season, let it “acclimatize” at room temperature for 1-2 hours. A sharp temperature drop can cause condensation inside the case, which will lead to a short circuit when turned on.

Where is the power button on the Xiaomi remote TV And how to press it.

One of the most common questions for beginners is, "What button on the remote turns on a Xiaomi TV?" The fact is that Xiaomi's remotes are minimalist in design, and the traditional red Power button is missing. Instead, it uses a combined button. Power/Menu (usually located in the upper left corner) or a separate touchpad.

Here’s what the switching process looks like for different types of remotes:

• 🔘 Standard remote (Mi) TV 4/4A/4S): Press and hold the icon button. ⊙ (circle) during 2–3 The Mi logo should appear on the screen.
• 🖥️ Remote with touch panel (Mi) TV 5/Redmi Smart TV): tap the top of the panel (usually the power area is located there) or press the physical Power button below the panel.
• 🎮 Game remote (Mi) TV Stick/Box): If you use the console remote, press Home + Back at the same time.

If the TV doesn’t respond to the press, check:

1. Whether batteries are installed in the remote (the indicator on the remote should blink when pressing any button).
2. Are there any obstacles between the remote and the IR receiver of the TV (usually located at the bottom of the screen).
3. Is the TV connected to the outlet (the power indicator on the front panel should burn red or white).

⚠️ Warning: If you press the power button, but the TV is producing a No Signal error or a light flashes, check if Hotel Mode is activated. It blocks the power on without a special code. To reset it, press Menu. + Volume Down for 10 seconds.

Are batteries installed in the remote?|Is the power cable connected to the outlet?|Does the indicator on the front panel burn?|Is there any obstacle to the IR receiver?|Have you tried to hold the 3 button?+ seconds-->

Step-by-step: first inclusion and initial setting

When the TV finally reacts to the remote and the Mi logo appears on the screen, the initial setup process begins, which takes 5-10 minutes and involves selecting the language, connecting to the network and setting the basic parameters.

Step 1: Language selection

Once you boot, the system will tell you to select the interface language. Use the buttons. ↑/↓ on the navigational remote and OK For Russian-speaking users, we recommend that you choose Russian (usually on the list). If you do not have the right language, select English, and then change the settings.

Step 2: Connect to the network

The TV will offer to connect to Wi-Fi. Select your network from the list, enter the password using a virtual keyboard (switching between characters - buttons). ←/→ If Wi-Fi is not working, you can use a cable connection (Ethernet). Xiaomi supports both 2.4 GHz and 5 GHz networks, but for stability, it is better to choose 5 GHz if the router supports it.

Step 3: Update the firmware

The system can suggest that you update the software. We strongly recommend that you accept that this will fix any bugs and improve performance. It will take 10-20 minutes to update. Don't turn off the TV during the process! If you interrupt the update, the TV may stop turning on.

Step 4: Set up a Xiaomi account and suggest you sign in to your Mi Account or skip this step. If you already have an account (like a Xiaomi smartphone), sign in, which will give you access to cloud services and synchronize settings. If not, you can skip, but some features (like voice search) will be limited.

Step 5: Configure channels (optional)

If you've connected an antenna, the TV will suggest you do automatic channel search, so select AutoSearch and wait until the process is complete, and you can manually adjust the frequencies for specific channels.

Step 6: Completion of the setup

After all the steps, you'll be taken to the PatchWall home screen, where you can start using your TV, running apps, setting up widgets, etc.

Common mistakes and their solutions

Even with strict adherence to the instructions, users face problems when they first turn on, and let's look at the most common ones and how to fix them.

Problem 1: The TV doesn't respond to the remote

If the indicator on the remote does not flash when you press the buttons, check:

• 🔋 Batteries installed correctly (plus to plus, minus to minus).
• 📶 Is there any interference between the remote and the TV (glass, mirrors, bright light can block the IR signal).
• 🔄 Try rebooting the remote: Remove the batteries for 10 seconds and insert back.

If the remote is working but the TV is not turning on, check if the power indicator on the front panel is on, and if not, the problem is in the power supply or cable.

Problem 2: Hanging in the loading phase

If the Mi logo burns for more than 5 minutes, then nothing happens.

1. Turn off the TV for 1 minute, then turn it on again.
2. If the freeze is repeated, try updating the firmware manually through USB (guideline).
3. Check if the Mute button is accidentally pressed on the remote – sometimes this blocks the download.

Problem 3: No sound after switching on

The lack of sound may be due to:

• 🔇 Press the Mute button on the remote (click it again).
• 🎧 Connected headphones or soundbar (check connectors) HDMI ARC 3.5 mm).
• 📻 Incorrect audio settings in the menu (go to Settings) → Sound and select. TV Speaker).

Problem 4: Wi-Fi is not working

If the TV does not find the network or does not connect:

• 🔄 Reboot the router.
• 📡 Check if the TV supports your network frequency (2.4 GHz or 5 GHz).
• 🔑 Make sure you enter the correct password (registration is important!).
• 📱 Try connecting via smartphone: some Xiaomi models have a Mi Share feature for transferring Wi-Fi settings.

💡

If the Xiaomi TV is constantly restarting after turning on, try turning off the Auto Update feature in the settings. Sometimes background updates conflict with the current firmware.

How to update the firmware manually if the TV is not turned on

If the Xiaomi TV is stuck on the logo or rebooted cyclically, the cause may be a damaged firmware, in which case manual updates through the phone will help. USB-This method works for most models, including the Mi. TV 4/5 Redmi Smart TV.

Step 1. Download the firmware.

Go to the official Xiaomi website (link) and find firmware for your model. Pay attention to the version (e.g. Mi). TV 4A 32" or Mi" TV 5 Pro 55”). Download the file in.zip and unpack it.

Step 2. Prepare. USB-accumulator

Take a flash drive up to the size 8 GB, format it in FAT32 (not NTFS!). Copy the unpacked firmware file (usually a folder) update.zip) You can put it in the root directory of the flash drive!

Step 3. Update the TV.

1. Turn the TV off the socket.

2. Put the flash drive in USB-port.

3. Press the Menu button on the remote and, holding it, connect the TV to the network.

4. wait for the recovery menu to appear (it can take up to 30 seconds).

5. Select Update via USB and confirm the start of the update.

It takes 5-15 minutes. When the TV is finished, it will restart automatically. If the update fails, check the firmware file and try again.

⚠️ Warning: Do not use data flash drives or other files on the drive - this can cause a failure. Also do not remove the flash drive or turn off the TV during the update!

💡

Manual firmware updates are a last resort. If the TV turns on but is unstable, try resetting to factory settings first via the Settings menu. → On TV. → Reset.

Setting up the remote for maximum convenience

The remote from Xiaomi TV may seem uncomfortable at first glance, but it can be customized for yourself. Here are some useful features that many people do not know about:

1. Voice search

If your remote is equipped with a microphone (icon) 🎤), You can use voice commands. Press and hold the microphone button, then make a request like, "Put on Netflix" or "Find comedies." It requires a Mi Account account and an Internet connection to work.

2. Quick access to applications

On some remotes (for example, for Mi). TV 5) there are programmable buttons to configure them:

1. Go to Settings. → DU remote.
2. Select the button you want to reassign (such as Netflix or Prime Video).
3. Assign an app from the list or add a shortcut to the home screen.

3.Game console mode

If you connect to the console (PlayStation, Xbox), activate the low latency mode:

• Go to Settings. → Display and sound → Image mode.
• Select the Game Mode (Game Mode).
• Turn off post-processing of video to reduce lag.

4. Customization of button lighting

On remotes with illumination (for example, Mi) TV Q1) brightness can be adjusted:

• Press the Home button for 5 seconds.
• In the menu that appears, select the Lighting Settings.
• Set a comfortable level (from 1 to 10).

Frequently Asked Questions (FAQ)