The first inclusion of the TV Xiaomi Mi: detailed instructions with photos and nuances

You just unpacked the new Xiaomi Mi TV TV And you're standing in front of a black screen with a remote? Don't worry, the first turn on may seem complicated, but it actually takes no more than 10 minutes, if you know all the nuances. from power connection to setting the main parameters, and also tell about the typical mistakes that beginners make.

It is important to understand that the first turn on is not just pressing the power button. It is a whole procedure of initializing the system, which includes selecting the language, connecting to the network, updating the firmware (if necessary) and basic calibrating of the image. If you miss a step or do it wrong, Later you may face problems with smart features or picture quality. We'll cover all the steps in, including hidden settings that aren't mentioned in the official Xiaomi manual.

This article is relevant for all modern models of Mi TV (series A2, P1, Q2, S Pros and others, released after 2020, if you have an older model (e.g. Mi). TV 4A 2018, some menu items may be different, but the overall logic of the process remains the same.

1. Preparation of the TV for the first turn on

Before you press the power button, you need to properly prepare the device, which is often overlooked, but it is important for the safety and durability of the equipment.

Location and ventilation: Make sure the TV is on a flat surface (unless it is a wall mount) and that there is at least 5 to 10 cm left between the back and the wall to circulate air, which will prevent overheating. This is especially true for models with Full Array Local Dimming (e.g. Mi). TV Q2 75) where the backlight emits more heat.

The cables are connected. The only thing that comes with the TV is the power cable, the rest of the wires (HDMI, Antenna, Ethernet, are purchased separately:

• ⚡ Power - insert the plug into the socket (do not turn it on yet!) Make sure the voltage on the mains matches the voltage indicated on the power supply (usually 100–240V).
• 📶 Antenna (if you plan to watch TV) RF IN back-panel.
• 🖥️ HDMI (Optional) – if you want to connect a console, game console or sound panel immediately.

⚠️ Warning: Do not connect the TV to the network through a thin wire extension cord - this can cause voltage drawdown and malfunction. Use a grounded socket.

Insert the batteries in the remote (usually come with two pieces). AAA). Make sure there are no obstacles between the remote and the TV (glass, mirrors can block the IR signal). TV P1 The newer remote supports Bluetooth, so it doesn’t need to be directed directly to TV.

Power plug in the socket|Antenna cable (if needed)|Batteries in the DU remote|HDMI-device (optional)|Verification of the ventilation gap-->

2. Turning on the TV and choosing the language

Now, to turn it on. Press the Power button on the remote (or on the TV control panel if the remote is not working), the first turn on can take up to 30-60 seconds, which is normal, since the system performs self-testing of hardware components.

The Mi logo will appear on the screen. TV, And then the initial setup wizard, and the first step is to choose the interface language:

1. With the buttons ← → Select "Russian" (or other language you want).
2. Press. OK confirm.
3. If the language is not listed, select English – you can always change it later in the settings.

Important nuance: In some regions (e.g. Europe), Xiaomi TVs will default to select a country. If your country is not on the list, choose Russia or Outer – this will not block features, but may affect available TV channels in the air.

⚠️ Warning: If the screen is black for more than 2 minutes after turning on, check if the power indicator is on (usually a blue or red LED at the bottom of the panel.

At this point, the system may suggest updating the firmware. If the TV is less than 6 months old, you can skip the update - the factory firmware is already relevant. Otherwise, agree to the upgrade, but make sure that the TV is connected to the Internet (more on this).

3. Internet connection: Wi-Fi or cable?

Without the Internet, the Mi smart function TV They won't work: you can't install apps, you can watch YouTube or Netflix, you can update software.

Option 1: Wi-Fi connection

• 📡 Select your network from the list in the settings menu.
• 🔑 Enter your password using the virtual keyboard (use buttons) ← → ↑ ↓ navigational).
• ✅ If the network is 5 GHz and the TV can’t see it, check if your model supports this range (in budget series, for example Mi). TV A2 32" may only be 2.4 GHz).

Option 2: Connecting via cable (Ethernet)

• 🌐 Insert the network cable in the port LAN back-bar.
• 🔌 Make sure the router is giving IP-address (DHCP included).
• ⚡ This is a much more reliable way to use Wi-Fi, especially if you plan to stream video in the future. 4K.

If the TV is not connected to Wi-Fi, try:

1. Reboot the router.
2. Make sure the network is not hidden (SSID broadcast included).
3. Temporarily disable the security (password) and try to connect without it.

💡

If you have a dual-band router, give the networks 2.4 GHz and 5 GHz different names (e.g, MyWiFi_2G and MyWiFi_5G). This will make it easier to choose the right network on the TV.

Set time, date and regional parameters

Once connected to the Internet, the system will suggest adjusting time and region, a step that is important for the correct operation of on-air TV (transmission schedule), applications (for example, Netflix shows content depending on the country), and automatic updates.

Time zone selection:

• ⏰ Choose your city or time zone (e.g., Moscow, GMT+3»).
• 🔄 Activate the option “Automatic time synchronization” – this will eliminate manual settings after the lights are turned off.

Regional settings:

• 🌍 Choose a country ("Russia", "Kazakhstan", "Belarus", etc.) and it will affect the country:

⚠️ Note: If you choose a country other than where you bought your TV, some services (such as Prime Video or the TV). OKKO) It may not be available due to geo-blocking.

At this point, the system may suggest updating the channel list (if the antenna cable is connected). You can skip this step and do it later manually through the Settings menu. → Channels → Search engine.

5. Primary setting of image and sound

Now the TV is ready to use, but for comfortable viewing, it is necessary to calibrate the basic parameters. Factory settings are often sharpened for the demonstration in the store (brightness at maximum, saturated colors), which is not always convenient for the home.

Image setting:

1. Go to Settings → Display and sound → Picture.
2. Choose Mode Mode Mode Mode or Standard (avoid Dynamic Mode – it overstates the contrast).
3. Adjust: Brightness: 45-55% (for rooms with normal lighting); contrast: 80-90%; color temperature: "Warm" (less fatigues the eyes).

Sound setting:

• 🔊 Settings menu → Display and sound → Select the Standard or Speech mode (the latter amplifies voices, useful for movies).
• 🎛️ Turn off Volume Auto-Regulation – it often doesn’t work properly.
• 📱 If you connect a soundbar or soundbar, select Digital Output (HDMI ARC)».

You can use YouTube test videos to accurately calibrate the image (search for the image «TV calibration test). TV Q2 S Pro has a built-in Game Mode – turn it on if you plan to connect the game console (PS5, Xbox).

💡

For OLED-models (e.g. Mi models) TV Master OLED) Reduce the brightness to 30-40% in the dark, which will extend the life of the panel and reduce the risk of pixel burnout.

6. Install applications and login in Xiaomi account

Smart platform Mi TV It works on Android. TV (In new models, or PatchWall, in old ones, you need to install apps and link your account to streaming services.

Authorization in the Xiaomi account:

1. Go to Settings → Account and Security → Add an account.
2. Select “Xiaomi Account” and enter your login/password (if you don’t have an account, register at account.xiaomi.com).
3. 🔗 Confirm the binding through SMS email.

Installation of applications:

• 📺 Google Play Market: Find it in the app menu, log in to your Google account and install the services you need (Netflix, YouTube, Kinopoisk, etc.).
• 🖥️ APK-Files: If the application is not in the Play Market, it can be installed manually through Settings → Security → Unknown sources (e.g. Wink or MEGO).
• 🔄 Update: Go to Settings → On TV. → Update the system and check the relevance of the firmware.

In PatchWall models (e.g. Mi) TV 4S) The interface is different, where content is aggregated by category (movies, TV shows, children's) to bring back classic Android. TV, Go to Settings. → Home screen → Home screen style and select "Classic».

💡

If the TV brakes after installing a lot of apps, go to Settings → Annexes → Clean the cache and delete temporary files.

7.Typical errors at first turn on and how to avoid them

Even when following instructions, users often encounter problems, and let's look at the most common ones and how to solve them.

Problem 1: The TV is not turned on

• 🔌 Check that the power cable is tightly inserted into the socket and connector DC-IN TV.
• 🔋 Make sure the socket is working (plug in another appliance).
• 🛠️ If the indicator does not burn, perhaps the fuse in the power supply has worked - contact the service.

Problem 2: No sound.

• 🔊 Check if the sound is turned off by the Mute button on the remote.
• 🎧 Make sure that the settings menu → Sound. → The output is chosen from the right source (for example, “Dynamics TV”, not the right one «HDMI ARC»).
• 🔄 Restart the TV by holding the Power button on the remote for 10 seconds.

Problem 3: Wi-Fi is not working

• 📡 Reboot the router.
• 🔄 Forget the network in the TV settings (Settings) → Network → Forget this network and connect again.
• 🛠️ If the Wi-Fi module is damaged, connect to the cable or use it. USB Wi-Fi adapter (supported models on the chip Realtek) RTL8188).

Problem 4: Hanging on the Mi logo TV

This is a sign of a firmware failure.

1. Turn off the TV for 1 minute, then turn it on again.
2. If it doesn’t help, reset: pinch the Menu. + Volume Down on the control panel and hold for 15 seconds.
3. In the extreme, re-flash the TV through USB (The instructions are available on the website mi.com).

8 Additional settings for experienced users

If you want to get the most out of your TV, pay attention to these “hidden” features.

1. Enabling the developer mode

This will allow you to install applications through ADB, Change system settings and test beta versions of the software:

1. Go to Settings. → On TV.
2. Click 7 times on the item "Build Number" (the notification "You became a developer").
3. Return to the main settings – a new section “For developers” will appear.

2.Tune in. HDMI-CEC

Function HDMI-CEC It allows you to control connected devices (set-top box, soundbar) from one remote:

1. Go to Settings. → HDMI-CEC.
2. Activate the option “Manage all devices”.
3. Connect the device to the port HDMI ARC (port №1).

3. Color calibration using CalMAN

For professional image settings, you can use the CalMAN program and calibrator (for example, X-Rite). i1Display This is true for models with Dolby Vision (Mi) support. TV Q2, S Pro: Detailed instructions are available on the forums 4PDA and AVS Forum.

4. Disabling Advertising in PatchWall

In some regions, PatchWall displays banner ads to remove them:

1. Go to Settings. → Account and security → Advertising.
2. Turn off the options “Personalized Ads” and “Content Recommendations”.
3. Install an ad blocker (e.g. Blokada) through APK.

💡

Do not disable AutoApps in Google Play – this can cause service disruptions (for example, YouTube will stop playing videos in Google Play). 4K).

FAQ: Answers to Frequent Questions