How to Turn on Xiaomi Mi TV TV P1: all ways and solutions to problems

Xiaomi Mi TVs TV P1 They are popular because of the combination of modern technology and affordable prices, but even with such technology, users sometimes have difficulties — for example, when the TV does not respond to the remote control or does not turn on after connecting to the network. This article will help you understand all the nuances of the inclusion of Mi TV P1, From basic methods to solving non-standard situations.

We'll go into all the ways you can activate your device, from classic power buttons to alternatives when your remote is broken or your software crashes, and we'll focus on the common mistakes that owners make, and we'll give you practical recommendations for how to fix them. If your TV doesn't turn on at all or it's acting unexpectedly, you'll find checklists to diagnose the problem.

This article will be useful for beginners who have just unpacked Mi. TV P1, And for experienced users who are faced with technical difficulties, all instructions are adapted to the current versions of the firmware and take into account the features of the model. P1 (including modifications with different screen diagonals).

1. Basic ways to include Xiaomi Mi TV P1

So let's start with the simplest and most obvious methods, which work 95 percent of the time, and even if you think you're a power user, check out these points, and often the problem is the little things.

The main way to turn on is to use a remote control. TV P1 The power button is usually located in the upper left corner and is indicated by the symbol ○ You press it once, and the TV will react within a few minutes. 2-3 If the indicator on the front lights up white (or blue on some modifications), the device switched on successfully.

The alternative is a power button on the body. TV P1 It's here:

• 📍 Right on the lower screen frame (for models 55, 65, 75")
• 📍 Back in lower right corner (for modifications 43" and 50")
• 🔍 The button can be hidden under a plastic stub – gently tuck it with your nail

If the TV doesn’t respond to the remote or the button, check:

• 🔌 Network connection: the cable must be tightly inserted into the socket and Power In connector on the back
• 🔋 Power indicator: if it does not burn at all - the problem is in the power supply or cable
• 📶 Signal source: The TV may have turned on, but there is no image on the screen due to lack of HDMI-signal

2 What to do if the TV does not respond to the remote control

One of the most common problems is Mi. TV P1 It doesn't turn on from the remote, but it does respond to a button on the body, which indicates that the remote is malfunctioning or that it's not synchronizing:

First, check the food items:

1. Remove the batteries from the remote and inspect the contacts – they should be clean, without oxidation.
2. Install new batteries (alkaline batteries are recommended, such as Duracell or Energizer).
3. Try rebooting the remote: press the Menu buttons at the same time and OK 5 seconds.

If everything is in order with the batteries, reset the interface of the remote:

1. Turn off the TV with a button on the case

2.Put the Back and Home buttons on the remote for 10 seconds

3. Bring the remote 10 cm to the IR receiver of the TV.

4. Press the Power button to re-pair-->

Another possible cause is interference from other IR devices.

• 📺 Remove other remotes (from the air conditioner, music center) away from the TV
• 🔦 Direct the remote strictly perpendicular to the IR receiver (it is located to the right of the Mi logo)
• 🌡️ Check the remote through the camera of the smartphone: when pressing the buttons should be visible infrared signal

⚠️ Attention: If the remote was in water or mechanically damaged, its internal board could fail.

3. Turning on the TV without remote control

Situations where the remote is lost or broken are not uncommon. - Xiaomi Mi TV P1 Supports several alternative ways of including:

1. The button on the body (as mentioned earlier) is the most reliable method. Press it once and wait up to 10 seconds.

• 🔌 Check if the power indicator is on (if not, the problem is in the power supply)
• 🔄 Hold the 15-second button for forced reboot

2.Mi Remote mobile application:

1. Download the app from Google Play or the App Store.
2. Connect your smartphone and TV to the same Wi-Fi network.
3. Select the Mi model in the app TV P1 And follow the instructions on the screen.

3. Voice assistant (if the function is activated):

• 🎤 Say, OK, Google, turn on Mi. TV" (If you are connected to Google Assistant)
• 🤖 Or: "Alice, turn on the TV" (for users of Yandex.Station)

4. HDMI-CEC (If another device is connected to HDMI):

Many modern consoles (for example, Xiaomi Mi Box or Apple) TV) They can also turn on the TV on the protocol. CEC. For that:

1. Turn on the console - the TV should turn on automatically.
2. If it doesn’t work, check the settings. HDMI-CEC in the TV menu (Settings) → System system → Management HDMI).

Diagnostics of nutritional problems

If you're on TV Mi TV P1 It doesn't show signs of life (the indicator doesn't burn, doesn't respond to buttons), the problem may be in the power supply or the network cable:

Step 1: Checking the power cable

• 🔌 Disconnect the cable from the TV and inspect it for damage (bending, melting).
• 🔄 Try another cable with the same connector (e.g. from a monitor or other Xiaomi TV).
• 💡 Connect the cable to another outlet – maybe a problem on the network.

Step 2: Diagnostics of the power supply

Power unit at Mi TV P1 built-in, but its operation can be indirectly verified:

• 🔍 See if the light on the front panel is on when you connect to the network. If not, the power supply is not supplying voltage.
• 🔧 Try “discharging” capacitors: disconnect the TV from the network for 10 minutes, then connect again.
• 📊 Measure the voltage at the output of the power supply (multimeter required). P1: 19.5V ± 5%.

Step 3: Checking the safety lock

In the Mi models TV P1 2020-2023 The fuse is located on the main board next to the power connector, and burnout is a common cause of the total lack of response of the TV:

1. Turn off the TV.
2. Remove the back cover (a cross screwdriver will be required).
3. Find the safety lock (marking) F1 or FUSE) Check its integrity visually or multimeterly.

⚠️ Note: If you do not have experience with electronics, do not try to replace the fuse yourself or repair the power supply.

5. Software failures and their elimination

Sometimes Mi TV P1 It doesn't turn on because of firmware freezes or system process conflict:

• 🔄 The TV is turned on, but immediately turned off.
• 🖥️ The indicator is on, but no image
• 🔴 The Mi logo appears on the screen and further downloading is stopped.

Solutions for each case:

1. A tough reboot

Hold the power button on the body 15-20 So you can turn it on again, and then you can turn it on again. 70% hang-up.

2. Reset to factory settings

If the TV is turned on but not loaded fully:

1. On the remote, hold both Menu and Back for 10 seconds.
2. In the Recovery Menu, select Wipe Data/Factory Reset (use volume buttons for navigation).
3. Confirm the reset with the OK button.

3. Flashing through USB

If the reset does not help, you will need to manually install the firmware:

1. Download the current firmware for your model from the site mi.com/support

2. Unpack the archive and copy the file update.zip flash-drive (FAT32)

3. Put the flash drive in USB-TV port (front or rear)

4.Clutch the Menu. + Volume Down on the case and turn on the TV-->

⚠️ Attention: Do not interrupt the firmware process! Power outage during the upgrade can cause irreparable system damage — 5-10 minute.

💡

Before the firmware, write down a model of your TV (indicated on the sticker at the back) - firmware for P1 55" and P1 65" may be different!

6. Image problems when turned on

Sometimes the TV turns on (the indicator is on, the sound is heard), but the screen is not there or it flashes.

For diagnosis:

1. Connect your TV to another signal source (e.g. Netflix via embedded apps).
2. Try another one. HDMI-cable (preferably with support) HDMI 2.0).
3. Run the screen test: pinch on the Menu remote → 1 → 9 → 6 → 9 (service menu).

If the backlight is a problem, you can temporarily use a TV with a flashlight pointed at the screen, and you can see the image. LED-Replacement of the tapes at the service center.

7. Frequent user errors

Analysis of Xiaomi support calls shows that most of the problems with Mi inclusion TV P1 This is due to typical errors:

• 🔌 Using an extension cord without grounding can cause power failures. Always connect the TV directly to the outlet.
• 🔄 Frequent on/off (for example, to save electricity) - this reduces the life of the capacitors in the power supply.
• 📺 Ignoring software updates - outdated firmware can cause conflicts when turned on.
• 💦 Indoor humidity - condensation inside the body leads to circuits. Keep the TV in a dry place, avoid sudden temperature changes.

Another common mistake is using unoriginal cables. Cheap. HDMI-The cables may not support the bandwidth required, which causes the TV to fail to recognize the signal and to "hang" during the turn-on phase:

• The screen flashes when switching sources
• There is a sound, but there is no image (or vice versa).
• The television is spontaneously turned off through 5-10 seconds after

💡

Use only certified cables HDMI High Speed (with logo on the package). 4K-content TV P1 standard HDMI 2.1.

8.When to contact the service center

Not all problems can be solved by yourself. Contact the official Xiaomi service if:

• 🔥 The TV makes extraneous sounds (creaming, squeaking) when turned on - this is a sign of a malfunction of the power supply or inverter.
• 💥 Smelled the smell of burning - indicates a short circuit or burnt components.
• 🔄 The TV is cyclically rebooted (on and off immediately) - a malfunction of the motherboard is possible.
• 📉 On the screen appeared vertical or horizontal stripes - a defect of the matrix or plume.

Before the service visit:

1. Take a picture of the TV serial number (on the back sticker).
2. Write down the symptoms of malfunction (when they appeared, after what actions).
3. Check if the warranty is valid (for Mi). TV P1 standard period - 12 months).

The cost of repairs in informal workshops may be lower, but the risks are higher - the parts used are often not original. mi.com/ru/service/location.

💡

If the TV is guaranteed, do not open the case yourself - this will void the warranty obligations!

FAQ: Answers to Frequent Questions