How to turn on Xiaomi TV for the first time: full instructions with photos and nuances

You just unpacked the new Xiaomi Mi TV TV or Redmi Smart TV And you don't know how to turn it on? The first turn on is not just pressing a button on the remote, but the right sequence of actions determines the stable operation of the device, the correct setting of the language, the Internet connection and even the life of the screen. In this article, we will take a detailed look at each step: from unpacking to completing the initial setup, including hidden nuances that are not written about in the official instructions.

The manufacturer often misses important details, such as why the TV might not respond to the remote when it first turns on, or how to avoid crashes when connecting to Wi-Fi. We have gathered the user experience and service centers so that your first run goes smoothly. And if something goes wrong, at the end of the article you will find a section with the solutions to problems.

Preparing for the first turn on: what to do before pressing the button

Before you plug the TV into the outlet, follow a few mandatory steps, which will take no more than 5 minutes, but will save you from potential problems.

First, check the kit. In the box with the TV Xiaomi should be:

• 📺 TV itself (protected by film and foam inserts)
• 🎮 Remote control (with or without batteries)
• ⚡ Power cable (for models with external power supply)
• 📄 Guarantee card and brief instructions
• 🔧 Fixed items (if you plan to hang on the wall)

Pay special attention to the remote: in some models (for example, Mi). TV Q2 75" batteries are not included. If the remote doesn't work, check if the infrared lens is covered with a protective film (this is a common cause of malfunction).

💡

If you buy a TV in the cold season, let it acclimatize at room temperature. 2-3 It's an hour before it's turned on, and it'll prevent condensation from forming inside the enclosure.

Second, select the installation site.

• 🔌 The socket should be grounded (especially for models with a metal body)
• 📶 Distance to the router - no more than 10 meters for stable Wi-Fi
• ☀️ Avoid direct sunlight on the screen (matrix burnout risk)
• 🪑 Optimal height of installation - at eye level when sitting

Power Connection: Why the TV May Not Turn On The First Time

Now, to turn it on, and here many users are faced with the first problem: the TV doesn't respond to the power button, and the reasons can be different, from the banal absence of batteries in the remote to the locking due to transportation.

Follow this sequence:

1. Connect the power cable to the TV and socket. Make sure the plug is tightly inserted - on some models (Redmi Smart). TV X) the power connector may be tight.
2. Press the power button on the remote (usually highlighted in red). If there is no reaction, try the button on the TV body (located on the side or bottom).
3. Wait. 10-15 The first turn on takes longer than usual, which is normal.

If the TV is not turned on anyway:

• ⚡ Check if the indicator on the front panel is on (if so, the problem in the remote)
• 🔄 Try another power cable (especially if you use an extension cord)
• 🔋 Remove the batteries from the remote for 30 seconds and insert back in

Language and Region Choice: How to Avoid Configuration Errors

Once successfully enabled, you will see a welcome screen with the Xiaomi logo, and then the initial setup process begins, where the most important step is choosing the language and region.

• 🌍 Available applications in Mi TV Store
• 📺 Broadcast format (PAL/NTSC)
• 🎵 Available soundtracks on air TV

Instructions for selection:

1. On the first screen, select Russian (or any other language you want). Use the buttons. ↑↓←→ navigational, OK confirm.
2. Next, select a country: Russia for Russia, Ukraine for Ukraine, Kazakhstan for Kazakhstan. If your country is not on the list, choose the nearest region with a similar broadcast format (for example, Belarus or Poland).
3. Confirm the choice. The TV can reboot -- that's okay.

Selected Russian language interface|

The country corresponds to your location|

The broadcast format is automatically set to PAL (for Russia/CIS)|

Time and date are displayed correctly-->

⚠️ Note: If you made a mistake with the choice of the region, you can only change it through a complete reset (Settings) → The device → Some apps (e.g. Netflix or YouTube) may restrict content by region.

Wi-Fi Connection: Why Your TV Can't See the Network and How to Fix It

Without the Internet, you won't be able to install apps, update your firmware, or use smart features, but many people find that Xiaomi TVs don't see or connect to the Wi-Fi network.

Standard connection procedure:

1. In the settings menu, select Wi-Fi (or Network) → Wireless network).
2. The TV will start scanning. Select your network from the list.
3. Enter your password with your on-screen keyboard. Use a voice-op console (if supported) for convenience.
4. If it's successful, a checkmark next to the network name will appear.

If your TV doesn’t see your network:

💡 Useful tip: If your router supports two frequencies (2.4 GHz and 5 GHz), it's better to use 2.4 GHz for a TV - this range is more stable for streaming video, albeit slower. To split networks, change the name SSID for 5 GHz in router settings (for example, add a suffix _5G).

Firmware update: do I need to update the TV immediately after purchase

Once connected to the Internet, the TV might suggest updating the firmware, and users disagree, with some saying to update immediately, others saying to wait, and then figure out what to do.

Arguments FOR the update:

• 🛡️ Correcting critical errors (e.g., sound problems in Mi) TV P1)
• 🎮 Adding new features (e.g. Dolby Vision support)
• 🔒 Closing security vulnerabilities

Arguments against:

• ⚠️ Risk of "blinking" when interrupted update
• 🐢 Possible UI Slowdown (frequent issue after Redmi updates) TV A55)
• 🔄 Loss of user settings (such as screen calibration)

Our recommendation is to update your firmware, but with caution.

1. Use a stable internet connection (preferably via an Ethernet cable).
2. Do not turn off the TV during the upgrade (even if the process is delayed).
3. Before updating, check reviews about the latest firmware version on forums (for example, 4PDA or Mi Community).

💡

If the TV is stuck during the upgrade (the Xiaomi logo burns for more than 20 minutes), do not force it to turn it off.

Set up the basic parameters: what to change first

Once you've upgraded (or if you missed it), the TV will suggest you adjust the basic settings, so you can easily miss important points that you'll have to manually fix later, and then you'll have to sort through the key points.

1. Screen setting

• 🎨 Image mode: for the movie, select the movie, for games - the game, for normal viewing - the Standard.
• 🔍 Sharpness: reduce to 30-40% (factory settings are often overstated).
• 🌡️ Color temperature: Warm less fatigues eyes in the evening.

2.Sound.

• 🔊 Sound mode: Film for cinema, Music for concerts.
• 🎛️ Equalizer: Increase the average frequencies (100-500 Hz) for better speech intelligibility.
• 🔇 Auto Volume: Turn off to avoid sudden surges in sound.

Network and applications

• 📥 Auto-Update Apps: Turn on so you don’t follow updates manually.
• 🔒 Parental controls: set up if there are children in the house (time and content restrictions).
• 🖥️ Miracast/DLNA: Turn on for wireless broadcast from the phone.

⚠️ Note: In some models (Mi) TV Q1) The default is Power Saving Mode, which reduces brightness and contrast. Turn it off in Settings. → Screen. → Energy conservation.

Install apps: how to download YouTube, Netflix and other services

Without apps, smart TV functions are meaningless. TV Stores don’t always offer all the right software (especially for regions outside China.

Method 1: Through the built-in store

1. Open Mi. TV Store (image on the main screen).
2. In the search, enter the name of the application (for example, YouTube).
3. Click Install and wait for the download to be completed.

Method 2: Through APK-File (for experienced users)

If the app is not in the store:

1. Download. APK-file USB-drive (for example, from the APKMirror website).
2. Connect the flash drive to the TV.
3. Open the File Manager → choose APK → Install.
4. In the security settings, allow installation from unknown sources (Settings → Security → Unknown sources).

📌 Important nuances:

• Not all. APK They work on Android TV (We need TV versions).
• Apps like Netflix may require region verification VPN.
• After installation, update the application via Mi TV Store to avoid mistakes.

Problem Solving: What to Do When Something Goes Wrong

Even if you follow the instructions accurately, you can have problems, and we have a bunch of problems when you first turn them on and solve them.

If none of these solutions worked, please contact Xiaomi Service Center, which provides a 12-month warranty (for some models, up to 36 months per matrix) before visiting the service:

• 📋 Write down the serial number (located on the back panel).
• 📸 Take a picture of a check or warranty card.
• 🔄 Try resetting your settings (this is required in 80% of cases before repairs).

FAQ: Answers to Frequent Questions