How to turn on and configure a pedometer on Xiaomi Redmi Note 10 Pro: all ways

Xiaomi Redmi Note 10 Pro is equipped with a built-in accelerometer and gyroscope that allows you to track the number of steps without additional gadgets. However, many users face the problem: the pedometer either does not work at all or shows inaccurate data. In this article, we will analyze all the official and alternative ways to activate the function, and explain why the smartphone can miscalculate steps and how to fix it.

It is important to understand that the pedometer on Xiaomi does not work as a separate application, but as a system service integrated into the firmware. MIUI. Its data can be used by third-party fitness trackers (such as Mi Fit or Google Fit), but it requires proper permission settings and sensor calibration to work properly. If you just bought a smartphone or reset your settings, the pedometer is likely disabled by default.

1. Verification of hardware pedometer support

Before you set up the software part, make sure your Redmi Note 10 Pro is physically able to count steps.The model uses a Bosch sensor. BMI270 (6-axis accelerometer + The gyroscope, which is responsible for tracking movements, can be checked through an engineering menu or special applications.

Download Sensor Box for Android from Google Play and run it. From the sensor list, find:

• 📊 Accelerometer – should show changes when the phone moves;
• 🔄 Gyroscope – responds to turns;
• 🚶 Step Detector – is directly responsible for counting steps (may be absent from the list, but work at the system level).

If sensors are unresponsive or absent from the list, this may indicate:

• 🔧 Hardware failure (damage after falling or moisture);
• 📱 Software failure (reflashing or resetting required);
• 🛠️ Disabling sensors at the level MIUI (squirrel).

⚠️ Note: If the Sensor Box does not have sensors, but the smartphone has not been repaired, try updating the firmware to the latest version.

2. Enabling the pedometer through the MIUI system settings

In the firmware MIUI 12/13/14 For the Redmi Note 10 The Pro pedometer is activated via the Security section, which works without installing third-party apps, but requires preconfiguring permissions.

Follow the instructions:

1. Open the Settings. → Security → Stepper.
2. Activate the step count switch.
3. Click "Permissions" and enable access to:

"Make it look like a lock screen."

Include the calculation of steps in “Security"|

Issue all permits (geolocation, activity, auto-run)|

Calibrate the sensor (walking 20 steps)|

Check the display of data on the lock screen-->

After activation, wait 5-10 minutes: the system should start recording steps. If the data does not appear, restart the smartphone. Sometimes you need to calibrate the sensor - to do this, walk 20-30 steps with the phone in your hand, holding it in a natural position.

⚠️ Note: On some versions MIUI The Stepper section may not be in the Security menu, in which case use the methods in the following sections (via Mi Fit or Google Fit).

3. Set up a pedometer via Mi Fit (official Xiaomi app)

The Mi Fit app (developer Xiaomi Inc.) is designed to sync with fitness bracelets, but also works with the built-in pedometer of a smartphone. MIUI Inactive or showing inaccurate data.

Install Mi Fit from Google Play or AppGallery and follow the steps:

1. Launch the app and log in through your Xiaomi account (required!).
2. Click on the profile icon (top right) → "Add the device".
3. Select "Phone" (not bracelet!)
4. Follow the instructions on the screen, allowing all requests (including access to physical activity and geolocation).
5. After synchronization, go to the "Statistics" section" → "Steps".

To improve accuracy:

• 📏 Specify height and weight in the profile (affects the calculation of distance);
• 👟 Select "Walking Type" (Usually, Sports, Running);
• 🔄 Enable "Auto-Detection of Activity" in the application settings.

If steps are not counted after setting up in Mi Fit, check if the system pedometer is disabled. MIUI (These two systems may conflict: priority is given to the one that was activated later.

4.Use Google Fit to calculate steps

Google Fit is an alternative to Mi Fit that integrates better with other Google services (like Google Health Connect or Strava), and the advantage of this method is that data is automatically synced with your Google account and available on other devices.

Instructions for setting:

1. Install Google Fit from the Play Market.
2. Open the app and log in to your Google account.
3. Go to Profile" → "Settings" → "Activity tracking".
4. Turn on the options: 👣 "Counting steps"; 🏃 "Activity tracking"; 📱 "Use the sensors of the device".

"+"

"Add data manually"

For synchronization with Mi Fit:

1. In Google Fit, go to the Profile → Settings → Managing Connected Applications.
2. Find Mi Fit and allow data sharing.

💡

If the pedometer in Google Fit shows inflated values, turn off the option “Auto-detect activity” and use only manual input or data from Mi Fit.

Note: Google Fit can duplicate steps if the system pedometer is active at the same time MIUI. To avoid this, disable one of the data sources in the app settings.

5. Why is the pedometer on the Redmi Note 10 Pro lying or not working?

Even after the pedometer is set up correctly, it can show inaccurate data, and let's look at the typical causes and ways to fix them:

Additional factors affecting accuracy:

• 📵 Phone Position: In the hand or pocket of the trousers, the sensor works more accurately than in a bag or backpack.
• 🚶 Walking Rate: With slow walking (less than 3 km/h), the pedometer can skip steps.
• 🔋 Power saving mode: disables background sensor activity.

6. Alternative applications for calculating steps

If the built-in pedometer MIUI Mi Fit or Mi Fit are unstable, you can use third-party applications, and they often offer advanced analytics and better accuracy through machine learning algorithms.

Top.-3 apps for Redmi Note 10 Pro:

1. Pedometer (Leap Fitness Group) 📊 Minimalist interface; 🔋 Low energy consumption; 📈 Week/month activity schedules.
2. Accupedo (Coruscor) 🎯 Automatic calibration; 📱 Main screen widget; 🚶 Support for running and walking on stairs.
3. StepCounter (Macropinch) 🛠️ Manual correction of errors; 🌍 Integration with Google Maps to display routes; 🔒 No advertising in the premium version.

Before installation, check:

• 🔒 Permissions: App must have access to physical activity and auto-run;
• 📱 Battery Optimization: Add the App to Exceptions in Settings → Battery → Optimization;
• 🔄 Conflicts: Disable the system pedometer MIUI, if you use third-party software.

⚠️ Note: Some apps (such as Pacer or Argus) may conflict with Mi Fit, resulting in double step counting.

7 Reset pedometer settings in case of errors

If the pedometer stopped working after the update MIUI If you reset your phone, you may need to reset it completely, and this method also helps with constant crashes or hanging of the meter.

Resetting instructions:

1. Go to Settings → Applications → Application Management.
2. Find Mi Fit (or Google Fit if you use it).
3. Select "Storage" → "Clear Data" and "Clear Cache".
4. For the system pedometer: Settings → Security → Stepper → Data resetting
5. Reboot the phone and recalibrate the sensor.

If the problem persists, try:

• 🔄 Update MIUI last-minute;
• 📥 Reinstall Mi Fit/Google Fit;
• 🛠️ Reset all settings (without data loss) to Settings → The phone. → Resetting settings.

💡

Before resetting pedometer data, export activity history to Mi Fit (Profile) → Settings → Data export. This will allow you to recover the statistics after setting up.

FAQ: Frequent questions about the pedometer on the Redmi Note 10 Pro