How to turn on and configure the remote from the Xiaomi TV: from synchronization to repair

Xiaomi's remote control from TVs is not just an accessory, it's a key element of smart appliances control, but even with a device as simple as this, users are faced with problems: the remote does not respond to pressing, does not sync with TV or suddenly stops working after updating the firmware, 80% of the time the problem is solved in 5 minutes, but you need to know the exact algorithm of actions.

In this article, we will look at all the ways to turn on the Xiaomi remote, from basic synchronization to restoring work after resetting. Separately, we will focus on the typical errors that users make when setting up, and give a checklist for troubleshooting. If your remote from the Mi TV 4S, Mi Box S or Mi TV Stick refused to work, here you will find a solution.

1. Basic remote synchronization with Xiaomi TV

The first thing you need to do when you connect a new remote is to sync it to your TV, which takes no more than 30 seconds, but many users miss it because they think it should work out of the box. In fact, even the original Xiaomi remotes require initial tethering.

Synchronization algorithm:

• 📺 Turn on the TV with the power button on the case (if the remote does not respond).
• 🔄 Press and hold the back buttons (back) + Home (home) on the remote at the same time for 5-7 seconds until the indicator starts to blink.
• 📶 Bring the remote 10-15 cm to the IR receiver of the TV (usually located on the right or bottom of the screen).
• ✅ Wait for an audible signal or a message on the screen about successful synchronization.

If the indicator on the remote does not flash, check:

• 🔋 Battery charge (even new remotes can be discharged during storage time).
• 🛡️ No physical obstacles between the remote and the IR receiver (glass, film, decorative panels).
• 🔄 Compatibility of the remote model with your TV (for example, the remote from the Mi Box 3 will not work for Mi). TV Q1).

💡

If the TV doesn't respond to the synchronization, try removing the batteries from the remote for 10 minutes, then repeat the process. This will reset temporary errors in the chip.

2. Why Xiaomi remote does not turn on: top-5 cause

If basic synchronization doesn’t work, the problem can go deeper, and here are the most common reasons why Xiaomi’s remote is not working:

Special attention should be paid to the firmware of the TV. After the software update, some Xiaomi TV models (for example, Mi TV 4A 2018) lose communication with the remotes, in which case, resetting to factory settings or rolling back the firmware will help.

3. How to turn on the Xiaomi remote without a TV (check methods)

If you're not sure if the remote works at all, you can check it without the TV. You'll need a smartphone with a camera.

Instructions:

1. Turn on the camera on your smartphone and point the remote’s IR transmitter (usually located at the top) into the lens.
2. Press any button on the remote.
3. If the remote is serviceable, on the smartphone screen you will see a flashing purple light (IR radiation is visible through the camera).

If the light is not visible:

• 🔋 Check the batteries (even a weak charge can block work).
• 🛠️ Disassemble the remote and check the contacts of the battery compartment for oxidation.
• 🔄 Try to wake up the remote with a long press of the Power button (10-15 seconds).

4. synchronization of Xiaomi Bluetooth remote (Mi Remote, Mi Game Controller)

Xiaomi bluetooth remotes (such as Mi Remote or game controller) sync differently than infrared devices. You don’t need to press button combinations here – just activate the pairing mode.

Step-by-step:

1. Turn on Bluetooth on your TV: go to Settings → Devices → Bluetooth.
2. Press and hold the Pair (or Sync) button on the remote for 3 seconds until the indicator blinks quickly.
3. In the list of available devices on TV, select the name of your remote (for example, Mi Remote Pro).
4. Confirm the pairing on both devices.

If the remote is not displayed in the list:

• 🔄 Reboot the TV and remote (remove the batteries for 10 seconds).
• 📱 Make sure the remote is not connected to another device (such as a smartphone).
• 🔄 Update your TV firmware to the latest version (some versions have Bluetooth bugs).

Make sure your TV supports Bluetooth (check the model specifications)

Charge the remote (if the battery)

Disable other Bluetooth devices within a 5-meter radius

Update the TV firmware to the current version-->

5. Recovery of the remote after resetting the TV

After the TV's hard reset, all the devices connected, including the remotes, are turned off, and to get back up to work, you need to do a second sync.

Features of the process:

• 🔄 For IR panels, a standard procedure is sufficient (see Section 1).
• 📶 Bluetooth remotes require complete removal from the TV memory before re-pairing.
• ⚠️ On some models, the Mi TV 4X, Mi TV (5) after the reset, the IR port is blocked - only flashing will help.

If the remote is not synchronized after resetting:

1. Check if the hotel mode is activated – it blocks the connection of new devices.
2. Update your TV firmware via USB (instructions on Xiaomi’s official website).
3. Contact Xiaomi support if the remote is original and not older than 1 year – it can be replaced under warranty.

💡

After resetting the settings of the Xiaomi TV, all previously coupled devices are deleted from memory. Re-sync remote is mandatory, even if it has worked before.

6. repair the Xiaomi remote with your own hands (if nothing helps)

If the remote doesn't respond to synchronization and smartphone checks, there are two options: repair or replacement, and 60 percent of the time, the problem is with the button contacts or the chip.

What you can do on your own:

• 🛠️ Contact cleaning: disassemble the remote and wipe the buttons' contact areas with alcohol. Oxidation is a common cause of broken buttons.
• 🔧 Replace buttons: if a button is stuck or not pressed, it can be replaced by a donor from another remote.
• 🔋 Battery compartment contacts soldering: tracks that go to the battery compartment often break off "+" and.

If you are not sure about your skills, you should contact the service center. The average cost of repairing a Xiaomi remote is from 500 to 1500 rubles, depending on the breakdown. TV Q2 worth ~2500 ₽).

💡

Before disassembling the remote, take a picture of the location of all the parts and wires, which will help to properly assemble it back and avoid new breakdowns.

7. Alternative ways to control a Xiaomi TV without a remote

If the remote is broken and the repair is delayed, you can control the Xiaomi TV in alternative ways:

• 📱 Mi Remote (available for Android and iOS) supports IR and Bluetooth management.
• 🖥️ HDMI-CEC: If the TV is connected to a console or PC, you can control it through the remote of another device.
• 🎮 Gaming controllers (e.g. Xbox or DualShock) – Connect via Bluetooth.
• 🖱️ Mouse and keyboard through USB Bluetooth (works in the Android menu) TV).

For use with Mi Remote:

1. Download the app from Google Play or the App Store.
2. Select your TV model from the list of devices.
3. Follow the instructions on the screen for synchronization.

If the TV doesn’t respond to the app, check:

• 📶 Connecting a TV and a smartphone to a single Wi-Fi network.
• 🔄 Control permission in TV settings (Settings) → Devices → Mi Remote).
• 📱 Application version (update to the last version).

FAQ: Frequent questions about Xiaomi TV remotes

💡

If the Xiaomi remote stopped working after updating the TV firmware, try rolling back the software to the previous version or wait for a patch from the manufacturer.