The screen projection on a Xiaomi TV is a convenient way to stream content from your phone, tablet or computer to the big screen without unnecessary wires. However, many users face problems: the function does not activate, devices do not see each other, the image slows down. In this article, we will discuss all the working ways to enable projection on Mi TV, Redmi Smart TV and other models of the brand – from classic HDMI to wireless technologies Miracast and AirPlay.
It's important to understand that the way you connect depends not only on the TV model, but also on the source of the signal. For example, Miracast or Google Cast will work for Android smartphones, and for iPhone only AirPlay. We'll look at each option with step-by-step instructions, typical errors and ways to fix them. If your TV doesn't support wireless projection, at the end of this article you'll find alternative solutions, from adapters to router settings.
1. Does your TV support Xiaomi projection?
Before you try to connect, check the technical capabilities of your model.Most modern Mi TVs and Redmi Smart TVs (released after 2019) support wireless projection, but there are nuances:
- 📺 Mi TV 4/4A/4C/4S (2018–2020 ): only Miracast and DLNA, without AirPlay.
- 📺 Mi TV 5/5 Pro/5X (2020–2022: Miracast + AirPlay 2 (iPhone).
- 📺 Redmi Smart TV X/A (2021–2023 Full support for Miracast, AirPlay and Google Cast.
- 📺 Mi TV Q1/Q2/Q2Q (2022–2026 d.: all standards + improved connection stability.
To know the possibilities of your model:
- Open the Settings. → On TV.
- Check Wireless Networks and Devices → Screen projection.
- If there is no point, your TV only supports wired connection (HDMI).
⚠️ Attention: Xiaomi TVs based on Android TV 9 and older may require firmware updates to work with AirPlay. Check the relevance of the software in Settings → System system → Update.
2. Method 1: Wireless projection from Android-smartphone (Miracast)
Miracast is a wireless screen broadcast standard that works on most Xiaomi, Samsung, Honor, and others devices. You don't need a router to connect, the TV and phone connect directly over Wi-Fi Direct.
Instructions for Android 10+:
- On TV: go to Settings → Connection and Sharing → Screen projection (or Wireless Display).
- Activate the option and select Miracast mode.
- On your smartphone: open Settings → Connected devices → Screen projection (on MIUI – Screen → Wireless display).
- In the list of available devices, select the name of your TV (e.g. MiTV-XXXXX).
- Confirm the connection on both devices.
If the TV is not on the list:
- 🔄 Reboot both devices.
- 📶 Make sure your TV is on Wi-Fi (even if there is no network).
- 🔧 On your smartphone, turn on Developer Mode and activate Wi-Fi debugging (sometimes helps).
- 🛠️ Update the TV firmware (see Section 5).
☑️ Preparation for Miracast connection
⚠️ Note: Some Xiaomi smartphones (e.g. Redmi Note 10 Pro) have hidden projection function. To find it, type the "wireless display" request in the settings search».
3. Method 2: Projection with iPhone or Mac (AirPlay)
If you have an iPhone, iPad or MacBook, you’ll need AirPlay to stream on Xiaomi TV, which only works on Android TV 10+ models (such as the Mi TV 5 Pro or Redmi Smart TV X2022).
Step-by-step:
- On TV: Open Settings → Wireless Networks → Apple AirPlay and turn on the feature.
- On iPhone: Swipe down to open Control Point → press Screen Duplicate.
- Select your TV (e.g., MiTV-55Q2C) from the list.
- If necessary, enter PIN-code that will appear on the TV screen.
Frequent problems and solutions:
| Problem. | Reason. | Decision |
|---|---|---|
| The TV is not on the list. | Outdated TV firmware | Update the TV to the latest version |
| Connection is interrupted | Weak Wi-Fi signal | Connect both devices to the same 5GHz network |
| No sound when broadcasting | DRM Limitations | Use it. HDMI-lightning adapter |
| Image delay (lag) | Network overload | Disconnect other devices from Wi-Fi |
Important: AirPlay on Xiaomi TV supports broadcasting only from apps (YouTube, Netflix), but does not duplicate screens in games or some streaming services due to DRM restrictions.
💡
If AirPlay doesn’t work, try connecting via the ApowerMirror app (available for iOS and Android) which bypasses DRM restrictions but can delay up to 1-2 seconds.
Method 3: Wired connection via HDMI
If wireless methods are not suitable (for example, due to lags or lack of support), use the HDMI-This is the most stable way, but it requires additional adapters for mobile devices.
Connection options:
- 🖥️ Laptop/PC → TV: Use the standard HDMI-cable HDMI-IN TV-wise).
- 📱 Android-smartphone → TV: Adapter needed USB-C/Micro-USB → HDMI (for example, Xiaomi USB-C to HDMI Adapter).
- 🍎 iPhone/iPad → TV: you will need an original adapter Apple Lightning Digital AV Adapter.
Instructions for smartphones:
- Connect the adapter to the phone and then connect it to the TV. HDMI-cable.
- On the TV, select the signal source: press Input (or Source) on the remote and select HDMI1/HDMI2.
- On the smartphone may appear a request for permission to broadcast – confirm it.
⚠️ Note: Non-original iPhone adapters may have no sound or low resolution. Xiaomi recommends adapters with support HDCP 2.2 for Netflix and Disney broadcast+.
Why is the image on TV cut off at the edges?
5. Method 4: Projection via Google Cast (Chromecast)
Xiaomi Android TVs support Google Cast, a technology similar to Miracast but with advanced features (e.g. streaming individual browser tabs).
How to connect:
- Make sure your phone and TV are connected to the same Wi-Fi network.
- On TV: Open the Google Home app (if not, install it from the Play Market).
- On your smartphone: in the app that supports Cast (YouTube, Google Photos), click the broadcast icon (📺) and choose your TV.
List of apps that support Google Cast:
- 🎬 YouTube, Netflix, Disney+
- 🎵 Spotify, Google Play Music
- 📷 Google Photo, VLC
- 🌐 Chrome (broadcasting tabs)
A critical feature: Google Cast does not duplicate the screen of a smartphone, but only broadcasts content from supported apps.
💡
Google Cast is the best choice for streaming video, as it optimizes bitrate and reduces lags compared to Miracast.
6. Solving projection problems on Xiaomi TV
If the projection is not working, use this troubleshooting instruction:
| Symptoms. | Possible cause | Decision |
|---|---|---|
| TV not visible on the list of devices | Wi-Fi Direct or Bluetooth disabled | Enable both modules in the TV settings |
| Image slows or tears. | Weak Wi-Fi signal or network congestion | Connect to a 5GHz network or use HDMI |
| No sound when broadcasting | DRM Limitations or Wrong Source | Check the TV sound settings (Settings → Sound → Source) |
| The connection is broken in 1-2 minutes | Energy saving on a smartphone | Turn off battery optimization for projection application |
Additional advice:
- 🔧 If nothing helps, reset your network settings on your TV: Settings → Network → Resetting network settings.
- 📡 For stable operation of Miracast, use a router with support 802.11ac (Wi-Fi 5).
- 🔄 If after updating the firmware, the projection stopped working, roll back to the previous version (see the instructions for your model).
7. Alternative projection methods
If standard methods don’t work, consider these options:
- 🔌 Miracast adapters: devices like Xiaomi Mi TV Stick or AnyCast add wireless projection support to older TVs.
- 🖥️ DLNA-server: BubbleUPnP or Plex applications can stream media files without screen duplication.
- 🌐 Cloud services: upload a file to Google Drive or Telegram and open it to TV via your browser.
- 🎮 Game consoles: Xbox or PlayStation can be used as an intermediary for broadcasting from PC.
For owners of Xiaomi Mi Box or Mi TV Stick:
- Connect the device to HDMI-television-port.
- In the settings of the consoles, activate Miracast or Google Cast.
- Connect from your smartphone as described in Sections 2 or 5.
💡
If you need to stream a presentation from a laptop, but no HDMI-cable, use TeamViewer or AnyDesk to remotely control your TV via your browser.