How to turn on the new Xiaomi TV: a detailed guide

Buying a modern Smart TV from Xiaomi is always an exciting moment, marking the transition to a qualitatively new level of multimedia consumption. However, after taking the device out of the box, many users face the situation that is not obvious for beginners: the TV does not respond to the pressing of the remote buttons, and the screen remains black. This is not a sign of a malfunction, but a feature of logistics and environmental safety introduced by the manufacturer. The power supply or remote control often lacks power, which must be activated before first use.

The initial initialization process requires careful attention, as the correctness of the steps depends on the stability of the Android TV or PatchWall operating system in the future. Incorrect network connection or skipping update steps can lead to malfunctioning applications or slow interface response. In this article, we will discuss each step in detail, starting with physical connection and ending with fine-tuning image parameters.

It is important to understand that the algorithm of actions can vary slightly depending on the model, whether it is a budget Mi TV P1 or flagship Mi QLED TV. However, the basic principles of operation with the system remain the same for the entire ecosystem.

Physical training and configuration check

Before you look for the power button, you need to ensure that the device is properly powered and securely mounted. Make sure the TV is mounted on a stable surface or mounted on the wall using a certified VESA bracket. Negligence at this stage can lead to a matrix drop, which is a non-warranty case. Check the package: the box should have a stand, a remote control, a power cable and possibly wall mounts.

The power cable should be plugged directly into the outlet, avoiding cheap extension cords with insufficient current capacity. Modern LED and OLED panels require stable voltage for the correct operation of the backlight and processor. If you use a network filter, make sure that it is working and the button on it is in the "On" position.

Special attention should be paid to the protective film on the screen, and the protective polymer film should be removed from the matrix only after the TV is fully installed and checked to avoid accidental scratches during installation, many users make the mistake of removing it immediately, which increases the risk of damage to the anti-reflection coating.

• 📺 Check the integrity of the screen in side lighting before installation.
• 🔌 Use only the original power cable from the supply kit.
• 🧱 Make sure the surface of the tube can withstand the weight of the device with a margin.
• 📏 Keep a minimum distance to the wall for ventilation (usually 10 cm).

After physical installation, you can switch to power. The status indicator, usually located at the bottom of the frame or under the logo, should light up in red, signaling the transition to standby mode.

Activation of remote control

The most common reason Xiaomi's new TV doesn't turn on is the lack of power in the remote. Unlike older technology, where batteries are often inserted by the manufacturer, modern models come with insulating plastic tape, which blocks the batteries from contacting the contact group inside the compartment, preventing self-discharge during prolonged storage in the warehouse.

To activate the remote, flip it over and open the battery compartment, and you'll see a plastic insulation tape sticking out of the battery compartment, pull it out until you click it or pull it out, and then check if the polarity of the AAA battery installation is correct, and if the display on the remote lights up when you press any button, it's ready to go.

Some premium models use Bluetooth remotes that require pairing, and may require two buttons, such as Home and Menu, to be activated at the same time, or simply hold the remote less than 20 cm to the TV logo after the TV button on the body is turned on.

If the remote doesn't respond after replacing the batteries, try holding it close to the infrared receiver (usually located under the logo) and pressing the power button. The infrared signal works at short distances even without precise positioning.

First Start and Selection of Language

Point the remote to the TV and press the power button (usually red or with a circle symbol with a vertical line). If the remote does not work, use a mechanical button on the case, which is often hidden behind or located below the logo. After the power supply, the Mi or Android TV logo will appear on the screen, after which the operating system boot process will begin.

The first step is to choose the interface language, which is fully functional Russian, which is activated by default depending on the region of sale, but it can be changed. The use of the native language is critical for the correct operation of voice search and command recognition, since the algorithms Google Assistant and PatchWall are sharpened for a specific locale.

This is also where the hardware components are first checked, and the system reads data from the matrix, checks for Wi-Fi and Bluetooth modules, and if artifacts or boot logos are on the screen, it may indicate a problem with the plumes or matrix, which requires access to the store.

• 🌐 Select "Russian" in the list of languages for full localization.
• 📡 Wait until the initial screen calibration is completed.
• 🔊 Check for system notification sound when selecting language.
• ⏳ Do not turn off the TV during initialization.

Once the language is selected, the system may suggest software updates, an important step that we will discuss in more detail in the next section, as it provides security and stability.

Network connection and system update

Modern Smart TVs cannot function without Internet access. Connection is necessary to activate licensed content, streaming services and synchronize time. The system will suggest selecting your Wi-Fi network from the list of available ones. Enter a password using an on-screen keyboard. To simplify the input, you can use the QR-code connection function or synchronization with a smartphone.

If your router supports 5GHz, it is recommended to connect to this network, which provides higher data transfer speeds, which is critical for watching video in 4K and HDR resolution without buffering. 2.4GHz frequency can be overloaded by neighboring devices, which will lead to a slowdown of the interface.

Immediately after connecting to the Internet, the TV will check the version of the installed firmware. If a new version of MIUI for TV or Android TV OS is available, the system will strongly recommend installing it. The upgrade process can take from 5 to 20 minutes, during which time the TV can reboot several times.

⚠️ Note: It is strictly forbidden to pull the power cord from the socket during a firmware update, which can damage the boot sector and turn the TV into a "brick", the restoration of which is possible only in the service center through the programmer.

After a successful update and reboot, you’ll get access to the current interface with fixed bugs and new security features.

Setting up a Google account and services

The Android TV operating system on which Xiaomi TVs are based requires a Google account to be linked, a key point to accessing the Google Play, YouTube, Netflix and other services, and if you have a smartphone account, you can enter your username and password manually or use a quick pairing method.

The method of fast pairing allows you to enter data from the phone, scanning QR-It's not only convenient, it's also safe, because you don't have to type a complicated password through the TV remote, and when you log in, it syncs your app purchases, subscriptions and settings.

In the process of tuning, the system will also suggest activating voice control, which will require you to say a few phrases to calibrate the microphone of the remote to your voice timbre, which will improve the accuracy of command recognition in noisy environments.

Don't miss the privacy setting stage, where you can turn off advertising data collection and diagnostic information if you value your privacy.

Calibration of image and sound

Factory settings are often too bright and cold, because in the store window the TV should stand out. For home viewing, it is recommended to switch the mode of the image to Cinema or Standard. In these modes, the color reproduction is closest to the director's intention, and the load on the eyes is reduced.

Pay attention to the power saving settings. Auto Brightness can change the brightness of the screen depending on the lighting in the room. This is convenient, but sometimes the sensor does not work correctly, making the picture too dim, and you can turn this feature off in the image settings if you want.

Xiaomi’s TV sound system, especially thin TVs, may require equalizer tuning. Basic presets like Music, Cinema or News allow you to tailor the sound to the content. For news, a mode that enhances the frequencies of the human voice is better suited, and for movies, an extended bass mode.

• 🎨 Turn off Dynamic Contrast for a more natural picture.
• 🌡️ Set the color temperature to "Warm" or 6500K.
• 🔇 Check the noise reduction when watching TV channels.
• 🎬 Activate Game Mode to Reduce Delay (Input Lag).

💡

For a viewing. HDR-Content must be included in the mode HDMI 2.0 or higher in the input settings if you use an external console or console to get full dynamic range.

Proper calibration will save you from eye fatigue during prolonged viewing and will allow you to unlock the potential of the matrix.

Solving Typical Startup Problems

Sometimes the switching on process can go wrong. If the TV turns on but goes out after a few seconds or goes into reboot, it can indicate a software failure or lack of power supply. Try to perform a full power reset: turn off the TV from the socket for 5-10 minutes, then turn it on again.

If the remote stopped responding after the upgrade, you may have lost your Bluetooth settings. Go to Settings → Remote and Accessories and remove the device, then pair again. For IR remotes, replacing the batteries with fresh ones will help, as the refresh process can charge.

If the TV is stuck on the logo and does not load for more than 15 minutes, you may need to reset to the factory settings (Hard Reset), usually by a combination of buttons on the case or through Recovery Menu, which is entered by pressing certain buttons when turned on.

⚠️ Attention: If vertical or horizontal stripes appear on the screen, or the image is pink/green, this is a hardware malfunction of the matrix or plumes. Software methods here will not help - you need to replace components.

💡

Most power-on problems are solved by completely shutting down power for 10 minutes (capacitor recharge cycle) or replacing batteries in the remote.

If none of the software methods helps, and the TV behaves inadequately, you should contact an authorized service center, saving checks and a warranty card.

FAQ: Frequently Asked Questions