Xiaomi TV launch: from unpacking to setup

Contents

• Unpacking and preparation for first inclusion
• Power connection and signal source selection
• Step-by-step settings at the first start
• Internet connection: Wi-Fi, cable, mobile point
• Firmware Update: Why It’s Critical to Do It Immediately
• Typical Incorporation Problems and Their Solutions
• Optimizing settings for better image and sound
• Frequent Questions About Xiaomi TV’s First Launch

Xiaomi’s new TV is not just a content-watching device, but a full-fledged smart entertainment center with Android TV or Google TV on board. However, even such advanced technology requires the right first turn on to unleash its full potential. Many users face difficulties already at the unpacking stage: it is not clear which cables to connect first, how to choose the system language or why the TV does not respond to the remote control.

In this article, we will discuss the unique nuances of the first launch of Xiaomi TVs from 2023-2026 that are not described in the standard instructions, for example, why some models (Mi TV Q2 75" or Redmi Smart Fire TV) require a forced firmware update immediately after unpacking, or how to circumvent the "No Signal" error when connecting via HDMI 2.1.

Unpacking and preparation for first inclusion

Before you turn on the Xiaomi TV, it is important to properly unpack it and prepare the workplace.

• 📺 TV itself (possibly with a screen protector)
• 🎛 Remote control (often with batteries inside)
• ⚡ Power cable (in some models, external power supply)
• 📄 Brief instruction (usually in several languages but without details)
• 🔧 Wall mounted fixtures (if provided)

The first thing you need to do is look at the screen for physical damage, and even if the box looks intact, the transport could have damaged the matrix, and turn on the phone's flashlight and shine it at an angle on the screen that's off, so you can see scratches or cracks better, and if there's no defect, you can start installing it.

Keep your TV on a flat surface, avoiding direct sunlight. For models with a OLED- screen (e.g. Mi TV Master OLED), it is especially important to avoid static images in the first hours of operation – this can lead to printing (burn-in). If you plan to hang the TV on the wall, use only the original mounts from the kit – homemade solutions can damage the case.

⚠️ Warning: Do not connect the TV to a socket with a voltage above 240 V. Xiaomi models for the Russian market are designed for 220-240 V, and in some CIS countries the voltage can reach 250 V, which will lead to overheating of the power supply.

Power connection and signal source selection

Once you have the TV installed, plug the power cable into the socket. Most Xiaomi models have the power button located:

• 🔘 On the bottom of the screen (right or center)
• 🔘 On the remote (Power button)
• 🔘 In some models, a touch button on the back (e.g., in Mi TV P1)

If the TV doesn’t respond to the press of a button, check:

1. Is the power cable connected to the socket and to the TV?
2. Whether the power indicator is on (usually a red or white LED on the front panel).
3. Is the lock button on the remote not pressed (sometimes it is located on the side and blocks all commands).

Once you've successfully turned on, you'll see the Xiaomi or Redmi logo, and then the initial setup wizard, and if the screen is still black but the light is on, try a forced reset: press the power button on the TV for 10 to 15 seconds, and it will work even if the remote doesn't work.

💡

If the TV turns on but turns off, check the power saving settings in the menu. Some models have enabled Eco Mode, which shuts down the device when there is no signal.

Step-by-step settings at the first start

The initial setup wizard on Xiaomi TVs consists of several steps. Let's consider each in detail:

1. Use the ↑/↓ button on the remote to select Russian (or other language you want to use). Some firmwares suggest selecting a region first, including Russia or Europe, to avoid geoblocking issues.
2. Here you can choose Wi-Fi, Ethernet, or Mobile Access Point. If Wi-Fi doesn't find your network, check if the TV supports 5GHz (some budget models only run at 2.4GHz).
3. This step can be skipped, but without an account you will not be able to install apps from Google Play. If you do not have an account, create it in advance on your phone - it is inconvenient to enter data from the remote.
4. Xiaomi TVs support Google Assistant and Alice (in Russian firmware).If you do not plan to use voice control, this step can be skipped.
5. The system will suggest checking for updates. Never give up this step - in the first batches of TVs, there are often critical bugs that are fixed only through the update.

Once the setup wizard is complete, the TV will restart, and you can now fine-tune the image, the sound, and the external devices.

Check for software updates |

Connect the main services (YouTube, Netflix, Kinopoisk)|

Set up parental controls (if there are children)|

Disable unnecessary system applications |

Check the operation of all HDMI-ports-->

Internet connection: Wi-Fi, cable, mobile point

Without the Internet, Xiaomi TV loses most of its features: streaming services don't work, updates aren't installed, and voice assistants become useless.

If the TV is not connected to Wi-Fi, try:

• 🔄 Reboot the router and TV.
• 📶 Reduce the distance between devices or remove obstacles.
• 🔐 Check if the router settings are limited to MAC- addresses.
• 🔧 Reset network settings on your TV: Settings → System → Reset → Network settings reset.

⚠️ Warning: Xiaomi TVs with Google TV firmware (e.g. Mi TV Q2 2023) may experience an error when you first connect to Wi-Fi, "Can't get IP- address." In this case, go to Settings → Network → Additional → Static IP and enter the data manually (you can find them in the router control panel).

Firmware Update: Why It’s Critical to Do It Immediately

Many users miss the firmware update step, considering it optional, but on Xiaomi TVs, the first versions of the software often contain critical errors that affect:

• 🖥 Stability of the interface (hangs, lags).
• 🔊 Sound quality (distortion at high volume).
• 📺 Compatible with HDMI- devices (e.g., game consoles).
• 🛡 Security (vulnerabilities that allow hackers to access a TV)

To update the firmware:

1. Go to Settings → About TV → System Update.
2. Click Check for updates.
3. If you find an update, confirm installation. The TV will restart 1-2 times.

If the update is “hang” during the booting phase:

• Check the Internet speed (should be at least 5 Mbps).
• Connect the TV to the network via an Ethernet cable.
• If nothing helps, download the firmware manually from the official Xiaomi website to the flash drive and update via Settings → Update via USB.

💡

Updating the firmware via USB is the only way to restore the TV if it does not turn on after a failed OTA- update.

Typical Incorporation Problems and Their Solutions

Even after you set it up properly, users are faced with typical problems, and let's look at the most common ones.

If the Xiaomi TV turns on but switches off immediately, the reason could be:

• 🔌 Overheating of the power supply (especially if the TV was in a closed cabinet).
• ⚡ Power surges in the network (use a stabilizer).
• 🛠 Hardware malfunction (diagnosis required at a service center)

For diagnosis, try turning on the TV in another room or through another power source. If the problem persists, contact Xiaomi with the model and serial number (located on the sticker at the back).

Optimizing settings for better image and sound

After the first turn on, the Xiaomi TV works with factory settings that are not always optimal.

Image:

• 🎨 Picture Mode: Select Movie or Game (depending on content) in Settings → Display and Sound → Image Mode.
• 🔍 Clarity: Turn off motion blur (Settings → Additional → Motion Clarity) if you watch movies.
• 🌈 Color temperature: Set Warm for comfortable viewing in the evening.

Sound:

• 🔊 Equator: In Settings → Sound → Equalizer, select Preset Movie or manually adjust (increase low frequencies for bass).
• 🎤 Microphone: If you use voice assistants, turn on microphone amplification in the audio settings.
• 🔇 Night mode: Activate Automatic Volume Control to avoid sharp noises at night.

It's important for gamers:

• 🎮 Game Mode: Enable Settings → HDMI → Game Mode to reduce input delay.
• 🖥 Resolution and frequency: Set 4K @ 60Hz or 1440p @ 120Hz (if supported) in the console settings.

If your model has an Ambient Mode (e.g., the Mi TV Master), set it up to display time, weather or artwork in standby mode. This is not only beautiful, but also prevents imprinting on OLED- screens.

Frequent Questions About Xiaomi TV’s First Launch