First inclusion of Xiaomi Redmi 9S: full instruction from unpacking to settings

Xiaomi Redmi 9S is one of the most popular budget smartphones of the brand, which is still a relevant choice due to balanced performance and reliability. However, even a simple action like the first inclusion of a new device can raise questions for inexperienced users, especially if it is about setting up the system correctly, activating a Mi Account account or solving typical problems like hanging on the logo.

In this article, we will discuss the process of incorporating Redmi. 9S From unpacking the box to completing the initial setup, you'll learn how to insert correctly. SIM-You can find a map of what to do if your phone doesn't respond to the power button, and how to avoid common errors, and you can also find answers to questions about factory resets, firmware updates, and smartphone optimization right after you buy it.

Preparation for the first inclusion: unpacking and check of completeness

Before you turn on the Xiaomi Redmi 9S, make sure that the box has everything you need.

• 📱 Redmi Smartphone 9S (shielded)
• 🔌 Charger (5V/2A, type USB-A)
• 🔋 Cable USB Type-C (length) ~1m)
• 📄 Guarantee card and instructions (in several languages)
• 🪫 Paperclip for tray extraction SIM-map

If you don't have at least one of these items, you should go to the store to replace it. Pay attention to the condition of the box: if it's damaged or has autopsy marks, it may indicate that the phone has already been used, in which case you should stop buying or require that the device be checked for originality (for example, through IMEI.info).

Also check your smartphone for physical defects, such as scratches on the screen, chips on the body or backlash buttons. Redmi 9S has a plastic case that is less susceptible to damage than glass, but still can suffer from careless transportation.

💡

If you bought the phone with your hands, be sure to reset to factory settings (Settings → About Phone → Resetting), even if the seller assured that he had already done so.

Put it in. SIM-card and memory card: step-by-step instructions

Xiaomi Redmi 9S Supports two nano-SIM cards (4FF) and one microSD card (up to 512GB) in a hybrid slot, which means you can use either two. SIM-card SIM + A memory card. To insert them:

1. Turn off the phone (if it was turned on).
2. Find a tray for SIM-cards on the left end of the device (near the volume buttons).
3. Insert a paperclip from the kit into a small hole on the tray and press until it is pushed out.
4. Place it. SIM-card(s) to the tray according to the diagram (gold contacts must be directed downwards).
5. If you use microSD, insert it into the second slot (replacing the second slot). SIM-map).
6. Carefully push the tray back before the click.

Important: Redmi 9S It does not support eSIM, so it is not a physical device. SIM-If the phone doesn't recognize the card, check it:

• 🔄 Correct installation (contacts should fit tightly).
• 📶 Operator Compatibility (some virtual operators may not work).
• 🔧 Network settings: go to Settings → SIM-maps and mobile networks → Name of the access point (APN) and select the automatic setting.

First Enablement: Power button and system boot

Now, to turn it on, make sure the battery is at least 20 percent charged (the new phone usually has a small charge), plug the charger from the kit if the battery is dead.

1. Press and hold the power button (located on the right end) for 3-5 seconds.
2. Wait for the vibration and the Redmi logo to appear on the screen.
3. The first load can take up to 2-3 minutes – this is normal.

If the phone does not respond to the power button:

• 🔋 Check the battery charge (plug in for 10-15 minutes).
• 🔌 Try another charger or cable (possibly a problem in the component).
• 🔄 Hold the power button. + increase the volume simultaneously for 10 seconds (forced reboot).

Start settings |I check the configuration first |I charge to 100% |I watch reviews before turning on-->

If the Redmi logo turns off the screen or says "No command", it may indicate a damaged firmware, which would require a Fastboot flash or a service call.

System settings: language, Wi-Fi and Mi Account

After the successful download, you will see a welcome screen with a suggestion to choose a language. Russian, English and other languages are available for the Redmi 9S. Further configuration includes several key steps:

1. Wi-Fi Connection: Select your network and enter your password. Without the Internet, some features (such as firmware updates) will not be available.
2. Sign in to your Mi Account: If you already have a Xiaomi account, sign in. If not, sign up (you need an email or phone number) for synchronizing data, using cloud storage, and unlocking the bootloader.
3. Setting up the lock screen: select PIN-code, pattern lock or fingerprint (scanner located on the back panel).
4. Data recovery: If you had another Android smartphone, you can transfer contacts, photos and apps through Mi Mover or Google account.

At the configuration stage, Redmi 9S will prompt you to enable or disable various functions:

Choose Russian | Connect to Wi-Fi | Create/log in Mi Account | Set PIN or print | Disable unnecessary diagnostics-->

If the phone freezes or gives an error during the setup stage, try:

⚠️ Warning: If you enter your Mi Account data and you see a message saying "Server is unavailable," check your Internet connection or try it later.

Updating firmware and optimizing work

After the first turn on, it is recommended to update the Redmi 9S firmware to the latest version, this will fix possible bugs, improve performance and add new features.

1. Go to Settings → About the phone → System update.
2. Click "Check Updates."
3. If you have a new version, download it (preferably via Wi-Fi).
4. After download, click "Install" and wait for the reboot.

Tips for optimizing work after updating:

• 🧹 Clear the app cache: Settings → Annexes → Select an application → Warehouse → Clear the cache.
• 🔋 Enable Battery Mode: Settings → Battery → Battery mode → "Balanced".
• 📵 Turn off auto-run of unnecessary apps: Settings → Permits → Auto-start.

If your phone is running slower after the update, try:

⚠️ Attention: If Redmi 9S after updating the firmware constantly overheats or discharges quickly, reset to factory settings (Settings) → Additionally. → Recovery and reset. Pre-save important data!

💡

Regular firmware updates are key to the stable operation of the Redmi 9S. However, check user reviews on forums (such as 4PDA or Mi Community) before installing them to avoid bugs in new versions.

Solving typical problems in the first inclusion

Even a new phone may have problems, and let's look at the most common ones and how to fix them:

If none of these methods worked and the phone is still not working properly, check it for originality with IMEI.info or contact an authorized Xiaomi service center. Remember that the warranty is valid only if there is a check and an intact seal on the box.

Additional settings for comfortable work

To make the Redmi 9S even more convenient, we recommend setting the following settings:

• 🌙 Dark theme: Settings → Display. → Dark theme (reduces the strain on the eyes).
• 🔍 Navigation gestures: Settings → Display. → Full screen mode (more convenient than classic buttons).
• 🔔 Notifications: Disable unnecessary in Settings → Notifications.
• 🎵 Sound: Set up the equalizer in Settings → Sound. → equalizer.

It is also useful to install several applications for optimization:

• Greenify is used to “freeze” background processes.
• SD Maid is used to clean up garbage.
• AccuBattery – to monitor the status of the battery.

Don’t forget to clean your cache regularly and update your apps through Google Play, which will help you avoid brakes and system failures.

FAQ: Answers to Frequent Questions