Launching a new device is always exciting, especially when it comes to high-quality equipment from Xiaomi. Users often wonder how to properly activate a laptop or desktop PC to avoid damaging the battery and ensure the system works correctly from the first seconds. The process seems trivial, but modern models have a number of features, ignoring which can lead to a false conclusion about the malfunction.
In this article, we will take a closer look at all the nuances of brand computing activation, from checking the physical status to solving black screen problems. It is important to understand that devices can come in a special transport mode to save charge, and a standard button press may not work without prior preparation.
We’ll look at both classic startup methods and hidden features available through BIOS or special keyboard combinations.The power system in Xiaomi Mi Notebook and RedmiBook laptops is designed with energy savings in mind, so the “wake-up” algorithm may differ from the usual actions with other brands.
Initial inspection and launch preparation
Before you look for hidden buttons or panic because of a lack of response, you need to do a visual inspection, and often the problem lies in basic things, such as a protective film on the contacts or a completely discharged battery after long storage in a warehouse.
If you've just unpacked a Xiaomi Mi Notebook Pro or RedmiBook laptop, note that there's an insulating tape on the end of the case. Manufacturers often lock the power button physically so the device doesn't run out of power in the box. Take that tape off if it's present, and then try to activate the system.
⚠️ Warning: Do not force the charging cable unless it enters the port. Check if there is a protective plug inside the connector that must be removed before first connecting to the network.
For stationary solutions or monoblocks, it is critical to check the power supply configuration: make sure the cable is securely inserted into the connector before the characteristic click, and the adapter is connected to a serviceable socket. The charge indicator, if any, should catch fire even when the device is turned off.
☑️ Ready for first launch
Standard algorithm for turning on a laptop
The main method of activating Xiaomi and Redmi laptops is to use the power button, which is most often built into the keyboard. Unlike older models where the button was separate, here it is integrated into a common row of keys, usually in the upper right corner.
Press the power key and hold it for 1-2 seconds. Don't push too hard or hold your finger for a long time, because the button mechanism is designed for a clear but easy click. If the device was completely discharged, immediately after connecting to the network it may not turn on - let the battery collect a minimum charge for 10-15 minutes.
- 💡 Press the power button once with a short press to exit the sleep mode.
- 🔋 Hold the button. 2-3 seconds for cold start of the device switched off.
- ⚡ If your laptop doesn’t respond, plug in the charger and wait 10 minutes.
When you launch successfully, you'll see the Mi or Redmi logo on the screen. POST-The procedure (self-testing on activation) was successful and the system is ready to load the operating environment. If the screen remains black but the indicators are on, there may be a problem with the brightness settings or the external monitor connected.
Why does the laptop warm up on the first turn on?
Features of the launch of stationary PCs and monoblocks
Xiaomi’s fixed-station computers, such as the Mi Desktop series, have a classic turn-on circuit, but require that the peripheral connection be followed, so it’s important to connect the monitor, keyboard and mouse first, and then power the system unit.
The power button on the monoblocks is usually located on the bottom edge or side so as not to disturb the minimalist design of the front panel.When pressed, you can hear a quiet click of the relay in the power supply. The system fan should start rotating 1-2 seconds after pressing.
| Type of device | Positioning of the button | Status indication | Response time |
|---|---|---|---|
| Mi Notebook laptop | Keyboard (right) | LED next to the touchpad | 1-2 seconds |
| Monoblock Mi Desktop | Lower face/Side | Framed logo | 2-3 seconds |
| RedmiBook | Separate button | Built into the power key | 1 second |
| Gaming PC | Top panel. | RGB-caselight | Instantly. |
Some PC configurations require activation via a switch on the back of the case, and this tuber puts the power supply in Standby mode, without switching to I or On, pressing the front button will not work.
Diagnostics of problems with indication and charge
When the computer is not turning on, it is often associated with a malfunctioning power controller, and if the charge indicator flashes orange or does not burn at all with the adapter connected, it requires a discharge of static electricity, a common problem after transportation or power surges.
To perform the reset, turn off the charger and all peripheral gadgets. Press the on button and hold it for a period of time. 20-30 This action discharges the residual current in the motherboard capacitors. Then plug in the charger and try the standard switching algorithm.
⚠️ Note: If the charge indicator switches quickly between orange and green, it is possible that a non-original power supply is used or the cable does not withstand the required current strength.
Check the status of the charging port. In USB-C models, it is important to use a cable that supports fast charging and data protocols. Cheap cables can only transmit current, but not initiate a dialogue between the charger and the laptop, which causes the charge controller to block the power supply.
💡
Use only original cables and power supplies with a capacity of at least 65 watts for Xiaomi laptops. Weak charging from smartphones may not start the PC, but only slowly charge the battery when turned off.
Starting in Safe Mode and Recovery
If the computer is turned on but the operating system is not booting, you may need to log in to special modes. For Xiaomi devices, the standard BIOS/UEFI key combinations are relevant. Immediately after pressing the power button, start quickly and repeatedly pressing the F2 or F12 key.
Getting into the BIOS allows you to check if the system sees the drive and the battery. If the Information menu shows Unknown battery status or 0%, the plume inside the case may have gone off or the controller failed, in which case the software methods will not help.
- 🛠️ keyboard F2 — setting-in BIOS/UEFI.
- 💾 keyboard F12 — The boot device selection menu (Boot Menu).
- 🔄 Power combination + Volume Up (on some models) – reset or recovery.
In case of critical errors, Windows can offer automatic recovery. Don't ignore these suggestions if you're not sure of the cause of the crash. Automatic repair is often able to fix damaged bootloader files that have arisen from an incorrect shutdown.
💡
If the laptop is turned on but the screen is black, try connecting an external monitor. If there is an image, there is a problem in the matrix or the screen plume, if not, in the graphics card or the motherboard.