How to turn on cable TV on Xiaomi TV: full instruction with photo

Why cable TV might not work on Xiaomi TV And how to fix it.

You connected the cable from the provider to the Xiaomi Mi TV TV, But instead of your favorite channels, you see "No signal" or a black screen? The problem is familiar to many owners of smart TVs of this brand. LG. Depending on the model (e.g., the M) TV 4S, Mi TV Q1 or Mi TV A Pro) the path to settings may differ.

In this article, we will discuss all possible ways to connect cable TV – from analog to digital (DVB-C/T2), You'll learn what network settings to set for popular providers (Rostelecom, MTS, Beeline), how to update the firmware to support new broadcast standards, and what to do if the TV "can't see" the cable. TV Stick or projector – there is a solution for you too!

Before you start setting up, make sure that:

• 🔌 Cable connected to connector ANT IN (or RF IN) on the back of the TV, not on the back. HDMI or AV.
• 📶 The provider provides cable TV service in your region (check on the website or by phone support).
• 🔄 The TV has been updated to the latest version of the software (relevant for models older than 2020).

Step 1: Preparing Xiaomi TV for cable TV

Before you set up the channels, you need to connect the cable properly and make sure the TV is ready to receive the signal.

1. Turn off the TV power from the socket (this will reset the temporary errors of the TV tuner module).
2. Connect the cable from the provider to the connector ANT IN (It's usually marked with an antenna icon. If you have a Xiaomi Mi Box or TV Stick, you'll need an external one. DVB-T2/C tuner USB-connection.
3. Turn on the TV and wait for the system to load fully (about 30 seconds).

If you are using digital cable TV (DVB-C), Make sure the provider has provided you with the data to set up:

• 📡 Frequency (e.g. 298,000 kHz)
• 🔢 Symbolic speed (e.g, 6875 ks/s)
• 🔐 Modulation (usually 256) QAM)

These parameters can be specified in the personal account of the provider or by phone technical support.

💡

If you have a Xiaomi Mi TV 5 Pro or newer, check if the model supports DVB-C. Some versions for the European market (Mi) TV Q2) They may not have this standard.

⚠️ Note: If you connect a cable via an amplifier or splitter, make sure the device supports the frequency range of your provider. Cheap splitters often cut the signal above 860 MHz, which may cause some channels to be lost.

Step 2: Selecting a signal source in the Xiaomi menu TV

Once you've connected the cable, you need to switch the TV to TV reception mode.

1. On the Xiaomi remote, click the Source (or Input) button.
2. In the list of sources, select TV or antenna (on some models — DTV).
3. If you request a signal type, specify: 📺 Analog TV – for old cable TV (rarely used in 2026). 📡 Digital TV (DVB-C) — Digital cable TV from the provider. 📶 DVB-T2 — for digital TV (if a street antenna cable is connected).

On the Mi models TV P1 And the newer way might look like this: Settings → Device and general → Signal source → TV antenna.

Check the cable connection to the connector ANT IN|

Choose the right signal source (TV/DTV)|

Make sure the TV is not in "Game" mode or "PC"|

Turn it off. VPN (It can block access to TV services)-->

If the screen is black after selecting the source or if the message “No signal” appears, the reasons may be as follows:

Step 3: Automatic Channel Search on Xiaomi TV

The easiest way to set up cable TV is to search automatically, and it's good if you:

• 📶 Your provider broadcasts in the standard range (for example, Rostelecom or Dom.ru).
• 🔄 You don’t know the exact parameters of the network (frequency, symbolic speed).
• 🆕 The TV is updated to the latest firmware (relevant to Mi). TV 4A/4C).

Instructions for automatic search:

1. Go to Settings. → TV → Channel setting → Search engine.
2. Select the signal type: Cable (DVB-C) — for digital cable TV (DVB-T2) — if the antenna cable is connected.

Russia

OK.

Important: On Xiaomi models 2021-2026 years (e.g. Mi) TV Q2 75") The auto search menu has a quick search option that skips weak channels, but may not find regional programs.

⚠️ Note: If less than 10 channels are found after auto search, the TV probably does not support your provider's encryption standard. CAM-module (for example, for Tricolor or NTV-Plus packages).

Step 4: Manually configure channels (for power users)

If the automatic search doesn't work, you'll have to enter the settings manually, which is true for providers with custom settings (e.g. local cable networks), and you'll need data from the provider:

Instructions for manual adjustment:

1. Go to Settings. → TV → Channel setting → Manual search.
2. Select the signal type: DVB-C (cable-TV).
3. Enter the parameters: Frequency: 314,000 Symbol speed: 6952 Modulation: 256 QAM Networked ID: 12345 (if required)
4. Click Search and wait for the result.

How to connect:

1. Put it in. CAM-module CI-slot on the back of the TV (usually next to the connector) ANT IN).
2. Insert the smart card into CAM-module (chip up!).
3. Go to Settings. → TV → Setting up CI-module.
4. Select Automatic Setup or enter data manually (if required).
5. Start searching for channels (see Step 3).

If CI-There is no slot (for example, in Xiaomi Mi). TV 4A), You will need an external tuner with support. DVB-C and CAM-module connected through HDMI or USB.

⚠️ Note: Some providers (e.g. Akado) use binding CAM-If you moved the module from another TV, it may need to be re-activated through your personal account.

Step 6: Update the firmware to support new TV standards

If your Xiaomi TV is released before 2020 (e.g. Mi) TV 4S 55) it may not support modern standards DVB-C or DVB-T2 It's because of the old firmware:

1. Check the current version of the software: Settings → On TV. → Version. MIUI TV.
2. If the version is older 2.0.100 (model 2019-2020 d.), update the firmware: 🔄 Through the Internet: Settings → On TV. → Updating the system → Check for updates. 💾 Manual: Download the firmware from the official Xiaomi website, save to a flash drive and update through Settings → On TV. → Update through USB.

Critical information: After updating the firmware on Mi models TV 4A/4C To avoid resetting, export the list to Settings. → TV → Channel management → Export (not available on all versions of the software).

If the update doesn’t work, check the compatibility of the model with your provider:

💡

If after the update the TV stopped turning on, try resetting to factory settings: pinch Menu + Volume Down on the remote when turning on TV.

Solving Typical Cable TV Problems on Xiaomi

Even after setting it up correctly, you can still get errors.

1. no signal (0%) or low signal strength

Causes and solutions:

• 🔌 Bad cable contact: Check if the connector is tightly inserted. Try turning it slightly in the socket.
• 📉 Weak signal from provider: Connect the cable directly, without splitters, or use an amplifier.
• 🔄 Incorrect signal source: Make sure the menu is selected TV or DTV, not HDMI.

2 Not all channels found

What to do:

• 🔍 Run a second search with other options (see Step 4).
• 📡 Check if your model supports you. MPEG-4 (Some channels broadcast in this format).
• 🆕 Update the channel list manually through Settings → TV → Update of channel list.

3.The channels are braking or getting stuck

Possible causes:

• 📶 Unstable signal: Check the cable for damage.
• 🔋 Overheating of the TV: Make sure the vents are not closed.
• 🔄 Conflict with other devices: Turn off Wi-Fi or Bluetooth while you’re watching.

4.No sound on some channels

This problem often arises from incompatibility of audio codecs.

• 🔊 Go to Settings. → Sound. → Sound format and select PCM instead of Dolby.
• 🔄 Update the firmware (new versions add support) AC3 and E-AC3).
• 📡 Check the provider’s settings – some channels broadcast sound in format MPEG, It is not supported by older Xiaomi models.

💡

If the problem persists after all the manipulations, try connecting the cable to another TV. If there is a signal, your Xiaomi tuner is defective (repair required).

FAQ: Frequent questions about cable TV on Xiaomi