Double-tap to turn on the screen on Xiaomi: how to set up and which models support the function

Are you tired of constantly pressing the power button to unlock a Xiaomi smartphone? Double Tap to Wake solves this problem — just touch the switched-off display twice, and it immediately activates. This option not only saves time, but also prolongs the life of the mechanical power button, which can wear out or stick over time.

However, not all users know that this feature is hidden in the MIUI settings and requires activation through a hidden menu or third-party apps on some models. In this article, we will analyze the step-by-step instructions for different versions of the firmware (MIUI 12/13/14), list supported devices and explain how to solve typical problems, from the lack of an option in the menu to accidental positives.

Important: The function only works on AMOLED-screens (or modern ones) IPS It supports Always-On Display, as it requires constant touch scanning in standby mode. If your Xiaomi or Redmi is equipped with an outdated display, the option may not be available even after the firmware update.

What Xiaomi models support double-tap to turn on the screen

Double Tap to Wake is not available on all devices of the brand, but depends on the type of screen, firmware version and hardware platform, and below is a table with models that run out of the box or can be activated through hidden settings.

If your model is not on the list, check its specifications on the official Xiaomi website – look for the mention of Always-On Display (AOD) or AMOLED-The function can also be enabled on some devices via ADB-Teams (we will talk about it below).

⚠️ Note: On smartphones with IPS-screenless AOD (Like Redmi. 9T or POCO M3) double-pressing may not work consistently or lead to increased battery consumption due to constant sensor survey.

How to enable double-click on Xiaomi with MIUI 14 (official way)

In recent versions of MIUI 14 firmware, the option has become more affordable, but its location depends on the regional firmware.

1. Open the Settings → Display.
2. Scroll down and find the Screen Lock section (on some devices, Sleep Mode).
3. Slip on the item Double tap to wake (or Double tap to wake in English firmware).
4. Activate the switch and confirm the action.

If the item is not on the menu, try an alternative path:

• 🔍 Settings → Additionally. → Special facilities → Physical buttons → Awakening by double-press.
• 📱 Some of them. POCO option hidden in Settings → Lock screen → Additionally.

Make sure the screen is clean (dust interferes with the operation)

Turn off the cover or film (they can block touches)

Check the battery power (below 15% the function can be turned off automatically)

Update the firmware to the latest version-->

After activation, test the function: turn off the screen (press the power button) and double tap the display at intervals of ~0.5 seconds. If the screen does not respond, try:

• 🔄 Reset the device.
• 🛠️ Reset the Display settings in Settings → System system → Resetting settings.
• 📲 Install a third-party app (e.g. Tap, Tap from Google Play).

Activate double-pressing through ADB (for hidden functions)

If the option is not on the menu, but your device supports AMOLED-screen, you can turn it on through ADB-This method works for most Xiaomi smartphones with MIUI 12+, But it requires a computer connection.

You'll need:

• 🖥️ Computer with Windows/macOS/Linux.
• 🔌 Cable USB Type-C (original).
• 📦 Installed drivers ADB Fastboot (download from Android Developers website).
• 📱 Included Debugging by USB on a smartphone (Settings) → The phone. → 7 times press the version MIUI, Then go back to the extra. → For developers).

Step-by-step:

1. Connect your smartphone to your computer and confirm the debugging permission.
2. Open the Command Prompt (Windows) or Terminal (macOS/Linux) in the folder with ADB.
3. Enter the command to check the connection: adb devices must appear serial number of the device.
4. Activate double-click command: adb shell settings put global double_tap_to_wake 1
5. Reboot your smartphone: adb reboot

If the function doesn’t work after the reboot, try an alternative command:

adb shell settings put secure doze_double_tap_wake 1

⚠️ Attention: Misuse of the right ADB Do not change other parameters through the command line unless you are sure of their purpose. double_tap_to_wake 0 shutdown.

Why Double Pressing Doesn't Work: Typical Problems and Solutions

Even after setting it up properly, the function may fail, and let's look at the main reasons and ways to eliminate them:

If the problem persists, check:

• 🔋 Battery charge (below 5% function can be switched off automatically).
• 🛡️ Availability of updates for the touch driver (in Settings) → Update of the PO).
• 📵 Third-party apps (e.g. Greenify or Battery Saver) may block the feature).

Yeah, it works no problem.

Yeah, but it doesn't always work.

No, no option in the settings.

I tried it with ADB, it didn’t help.

I don't know, I haven't.-->

How to disable double-tap on Xiaomi

If the function interferes (e.g., it works in your pocket or during calls), it can be deactivated by:

1. Go to Settings → Display → Screen lock.
2. Find the Double Press to wake up and turn off the switch.
3. If the option is not on the menu, use it. ADB-Adb shell settings put global double_tap_to_wake 0

On some firmware (MIUI 12 for Redmi Note 9 Pro), the function may stick after shutdown.

• 🔄 Reset the device.
• 🧹 Clear the Settings app cache (Settings) → Annexes → Application management → Settings → Clear the cache).

💡

If double tap interferes during games, activate Game Mode in the notification curtain - it temporarily turns off wake-up gestures.

Alternative ways to turn on the screen without a power button

If double-pressing doesn’t work or work on your model, consider alternatives:

• 🔊 Voice Assistant: Configure Google Assistant or XiaoAI to activate by voice command (e.g., “OK, Google").
• 📳 Lift gesture: Include in Settings → Display. → Gestures option to raise to wake up.
• 🔦 Approximation Sensor: Some Firmware (MIUI 14 for POCO F5) Supports awakening when holding your hand to the top of the screen.
• 📲 Third-party apps: Tap, Tap - emulates double tap on any screen. WaveUp - wake up with a swing of your hand over your smartphone. Gravity Screen - turn on the screen when you change the position of the device.

When using third-party applications, consider:

• 🔋 They can increase battery consumption by 5-15% due to background activity.
• 🛡️ Require permission for Special Features and Overlay over other applications.
• 🔄 Can conflict with system gestures (e.g. SwiftKey or Nova Launcher).

💡

On smartphones with an infrared sensor (for example, Xiaomi 13 Ultra) you can adjust the awakening by gesture of the hand – it is less energy-consuming than double pressing.

Effects of double-pressing on battery and performance

Many users are worried that Double Tap to Wake increases battery consumption.

• ⚡ Nana AMOLED-screens have minimal impact (1-3% in 8 hours standby), as the sensor is only questioned when touched.
• ⚡ Nana IPS-screenless AOD The cost can increase by 5-10% as the system constantly scans the touches.
• 🔋 In Ultra Battery Mode, the function is turned off automatically on most devices.
• 📉 There is no impact on the performance – gesture processing takes less than 0.1 seconds.

To reduce energy consumption:

• 🔄 Turn off the function during sleep (use MacroDroid for automatic control).
• 📴 Reduce sensor sensitivity in settings (this will reduce the number of false positives).
• 🔋 Include the Adaptive Battery in Settings → Battery → Power regimen.

To test the real impact on autonomy:

1. Charge your smartphone to 100% and activate double tap.
2. Leave it on standby for 6-8 hours (no active use).
3. Compare battery consumption with the function turned off via Settings → Battery → Battery usage.

FAQ: Frequent questions about double-clicking on Xiaomi