How to turn on Bluetooth on the Xiaomi 1S electric scooter

Activation of the wireless communication module is a key step in the process of preparing the Xiaomi Mi Electric Scooter 1S for full operation. Without this step, the user loses access to advanced telemetry, the ability to lock wheels and adjust driving modes via a smartphone. Many owners face difficulties at the initial pairing stage, believing that the module should be active immediately after unpacking.

In fact, the scooter control system requires a series of procedures to successfully synchronize with external devices. Often the problem is not the hardware malfunction, but the sequence of actions or software versions. Understanding the logic of the BMS (Battery Management System) and the controller allows you to avoid errors and quickly establish a stable connection.

This guide describes in detail the process of activating the Bluetooth module, diagnosing possible failures and methods for their elimination. We will look at both standard methods through the official application and alternative ways of interacting with the onboard computer.

Preparation for pairing and condition check

Before any manipulations are initiated, you need to make sure that the device is ready for communication, the electric scooter should be turned on, and the indicators on the display should display the current battery charge. If the charge level is critically low, the communication module may not work stable or not start at all to save energy.

Make sure your smartphone has GPS and Bluetooth enabled. Android and iOS have strict security policies that require geolocation to run applications that control smart devices. Without active geolocation, the app simply won't see the scooter on the list of available devices.

⚠️ Warning: Don't try to connect to the scooter via the standard Bluetooth menu of your phone's settings directly. 1S uses proprietary encryption protocol, and direct pairing without authorization through the application is impossible and meaningless.

Check the operating system version of your smartphone. Mi Home or Xiaomi Home requires current versions of Android (usually 6.0 and higher) or iOS (11.0 and higher) to work properly.Oddware may contain bugs that prevent the Bluetooth stack from working properly.

Installation and configuration of the Mi Home application

The main management tool is the Mi Home app (or Xiaomi Home in the global version), download the program should be exclusively from official sources: Google Play Store, App Store or from the official website of the manufacturer. APK-files from third-party resources can lead to unstable work or data leakage.

Once installed, you need to register for an account or log in to an existing one. When you first launch, the app will request permission to access Bluetooth, geolocation and LAN. Allow all requests, because without them the functionality will be severely limited. The choice of region in the application is also important: if the scooter is designed for the Chinese market, you may have to change the region in the profile settings to China.

Inside the app, you need to add a new device. Click on the plus in the top right corner and select the device search. At that point, turn on the scooter with a short, then long press on the power button. The display should light up, displaying speed and battery power.

The process of activating Bluetooth on a scooter

The process of “turning on” Bluetooth on Xiaomi 1S is automatic under certain conditions. Unlike headphones, there is no separate button to put the module in detection mode. Activation occurs when the controller captures a search request from an authorized application.

To start the process, go to the scooter at a distance of no more than 1-2 meters. In the application, click "Add device." If the scooter is new, it may suggest updating the firmware immediately after detection. It is critical not to interrupt this process and keep the scooter on until it is completely completed.

Sometimes you need to manually activate the pairing mode. On the scooter off, press the power button and the brake button (or zoom, depending on the board revision), holding them for several seconds. The battery indicator can start flashing in a specific way, signaling the transition to pairing mode.

Solving the visibility problems of the device

If the application does not find the scooter, although all the conditions are met, the problem can lie in the Bluetooth cache. On Android devices, the accumulation of temporary driver files sometimes blocks the search for new gadgets. You need to go to Settings → Applications → Mi Home and clear the cache, as well as reboot the smartphone itself.

Another common cause is firmware version conflict: If the scooter has a factory version of the software installed and the application requires a newer one for authorization, the connection will not be, in which case it may be necessary to use third-party utilities for the initial update of firmware, such as Xiaomi Flash Tool (with caution) or specialized applications for scooters.

Check the list of previously paired devices. If you've previously tried to connect a scooter and the process ended in an error, the profile may have been saved in a "bit" state. Go to the phone's Bluetooth settings, find a device called Mi Electric Scooter or a set of numbers, click "Forget device" or "Unpair".

Diagnostics through third-party applications

The official application does not always provide complete technical information. For deep diagnosis of the status of the Bluetooth module and battery, you can use specialized software, such as Xiaoyun or DarknessBot. These programs allow you to see raw data transmitted over the BLE (Bluetooth Low Energy) protocol.

These utilities can test the RSSI of a module, and if the signal is weak even in the immediate vicinity, it's possible that the antenna wire inside the deck has disconnected or damaged, and applications show a version of the protocol and can force the reconnection of services.

⚠️ Note: Using third-party software to make changes to the controller settings (e.g. changing region or removing speed limits) may result in warranty cancellation and unstable security performance.

When using third-party tools, it is important to be careful when writing new parameters. The communication protocol is sensitive to input errors. It is recommended to back up the current configuration before any changes. Most diagnostic functions are available in read-only mode, which is safe for the device.

💡

If the scooter stopped connecting after the iOS update, try uninstalling the app, restarting the phone, installing the app again and immediately giving all the requested permissions when you first start without missing steps.

Hardware malfunctions of the communication module

In rare cases, the problem is physical, and inside the deck, next to the controller, there's a Bluetooth module, and it's connected to the main board by a plume, and if you were actively driving through irregularities or when you got moisture, the contact could oxidize or move away.

The test requires partial disassembly of the scooter, removal of the bottom cover and visual inspection of the connection, oxidation of the contacts often looks like white or greenish coating, in which case neat cleaning of the contact group with alcohol or a special spray for electronics is required.

If the module is burned (which happens when voltage surges or short circuits), it will need to be replaced. On Xiaomi 1S, the module is often integrated into the controller board or connected through a specific connector. Self-repair without soldering skills and knowledge of electric vehicle circuitry is not recommended.

Frequently Asked Questions (FAQ)

💡

A stable Bluetooth connection is the key not only to comfort, but also to security, since it is through this channel that BMS and Firmware state data are transmitted, preventing critical errors.