How to return time to the screen of the phone Xiaomi Redmi 10

The problem of missing or incorrect time on the screen of the Xiaomi Redmi 10 smartphone can seem like a trifle until you are late for a meeting or can not respond to a message. Often users are faced with a situation where after a reboot, system update or battery discharge, the numbers on the display are reset to zero or simply disappear. This is not just a visual bug, but a signal of a violation of the synchronization of the system clock, which can affect the work of messengers, banking applications and security certificates.

Restoring the correct display of date and time on Redmi 10 requires a comprehensive approach. In most cases, the cause lies in a software failure of the MIUI interface or an incorrect time zone. However, sometimes the problem can be associated with a physical element - the CMOS battery, which is responsible for saving the time settings when power is turned off. In this article, we will discuss all methods for troubleshooting, from simple settings in the menu to deeper system changes.

Don’t ignore this glitch, as time desynchronization often leads to errors when connecting to secure Wi-Fi networks and the inability to log in to Google accounts. System time is a critical parameter for the Android operating system. If you notice that time on your device lives its own life, you need to immediately diagnose settings. Below are proven ways to help you get everything back in place.

Checking automatic time synchronization

The first step in solving the problem is to check the basic synchronization settings. The Android operating system installed on Redmi 10 is set by default to automatically receive accurate time from the network operator or via the Internet. If this feature is disabled, the phone will show manually set time, which easily gets lost when the battery is discharged.

To start, you need to go to the settings section. Open the main menu and find Settings, then go down to the Additional or System Apps section, where the Date and Time menu usually hides. This is the key switch "Use Network Time" (or "Auto-Time Adjustment"). Make sure the slider is activated and lit in blue.

If the switch is already active but the time is still incorrect, try to perform forced resynchronization. To do this, temporarily turn off the automatic setup slider, wait 10-15 seconds, and then turn it on again, which will cause MIUI to send a new request to the time server and update the data.

• ⏰ Make sure your phone is on mobile internet or Wi-Fi to request time.
• 📡 Check if it's worth it. SIM-map and whether the network catches if the synchronization goes through the operator.
• 🔄 Restart the device after turning on the automatic setting to fix the result.

⚠️ Warning: If after turning on the automatic setting, the time is still reset every time the phone is turned off, this may indicate a hardware problem with the power element on the motherboard that saves the settings. BIOS/UEFI smartphone.

Adjustment of time zone and time format

A common cause of confusion is not so much the time itself as the time zone chosen. On Xiaomi Redmi 10, there is a separate item in the date and time menu to select the region. If you are in Moscow and the settings are "Automatically" with an error of definition or manually selected "London", the difference will be several hours. It is important to check that your current city or region is selected in the Time Zone field.

You also need to look at the format of the display. Some users are used to the 12-hour format (AM/PM), while others use the 24-hour format. Switching between them doesn't change real time, but it affects perception. This option is usually located right under the automatic setup switch. Make sure you choose the option that's convenient for you so that you don't get confused when you plan things.

In rare cases, a time zone failure occurs after travel or shift SIM-The system can "remember" the old region, in which case it is recommended to manually select your city from the list, even if it is ticked "Automatically" that will force the shift. UTC for your region.

💡

Use the Watch widget on the home screen to visually monitor the current time and date without unlocking your phone, which will help you quickly notice crashes.

Setting up the display of time on a locked screen

If the phone's time is going right, but it disappears when the screen goes out and locks, the problem is the lock screen settings. On Xiaomi smartphones with a MIUI shell, a separate module is responsible for this, and you may have accidentally turned off the display of the watch or activated a mode that hides information to save energy.

To return the numbers to the locked screen, go to Settings → Lock screen. Here you should find the item “Clock Format”** or “Block Style”. Make sure you choose a style that implies displaying time (usually “Classic” or “Digital”). In some design themes, time may be hidden by the theme designer.

Also check the Always On Display settings if your Redmi 10 model supports this feature (or if it is emulated software). From the Settings menu → Lock screen → Always On Display, you can set the schedule and display style of the time when the phone is lying on the table.

The Effect of Energy Saving on System Clocks

Aggressive power optimization in MIUI sometimes causes the system to turn off background time synchronization processes to save battery life.If you have Power Savings mode on,** the phone may stop updating time in the background, causing it to lag or reset.

Try switching the battery mode to Balanced or Performance and see if the problem will go away, from the Settings → Battery menu, and check if the system time services have been added to the background activity restriction list.

There is a nuance associated with Quarantine Mode (sleep mode) that, if activated, the lock screen can be simplified to a minimum, and time may disappear or become barely noticeable. Check the Digital Well-being settings to make sure that the restrictions do not affect the display of critical information.

⚠️ Warning: Constantly operating in maximum performance mode can reduce the battery life of the Redmi 10.Use this mode only to diagnose time problems.

Reset date and time settings through the engineering menu

If standard methods don't work, you can use deeper diagnostic tools. Some versions of Xiaomi's firmware allow you to reset your time settings through an engineering menu or special codes. However, beware: changing unknown parameters can lead to unstable network operation.

A safer method is to reset your network settings, which often updates the time stamps you get from the operator. Go to Settings → Connection and Sharing → Reset Wi-Fi, Mobile Networks and Bluetooth. After this procedure, the phone will re-register on the network and request the current time.

You can also try changing the time manually to a knowingly incorrect one (for example, a year ago), and then turn on automatic synchronization again, which sometimes causes the system to re-initiate the NTP (Network Time Protocol) protocol and tighten the data correctly.

What to do if time is lost after full discharge

The situation of being reset to 00:00 or the date of January 1, 2020 (or another factory) after the phone is completely discharged and turned off is a classic sign of the discharge of an internal RTC (Real Time Clock) battery.

In modern smartphones, including the Redmi 10, this battery is often soldered and charged from the main battery when the phone is on. If the phone has been discharged for a long time, the charge could go away. In this case, prolonged charging of the device turned off (several hours) helps to “rock” the inner cell.

If the problem recurs regularly even during short periods without the main power, it may indicate a defect in the motherboard or wear of the component, in which case the software methods are powerless, and you will need to contact a service center to replace the power on the board.

• 🔋 Leave the phone on charge in the off state at least 4-5 hours.
• 🛠 Do not try to disassemble your phone yourself if you do not have experience with microsoldiers.
• 📱 Use an external watch or widget until the problem is finally resolved.

💡

If the time is reset only after the battery is completely discharged, the problem is hardware in nature and is related to the RTC power element on the board.

Frequently Asked Questions (FAQ)