How to Install and Configure Tricolor on a Xiaomi Smart TV: The Complete Guide 2026

Why Tricolor and Xiaomi are the perfect combination

Xiaomi’s modern Smart TVs offer users not only access to streaming services, but also the ability to connect satellite TV. Tricolor TV remains one of the most popular operators in Russia due to its wide selection of channels, stable signal and affordable tariffs. However, many Mi TV owners face difficulties in setting up equipment — especially if we are talking about the first attempts to connect a satellite dish.

In this article, we will discuss all the current ways to connect Tricolor to Xiaomi TVs (including Mi models). TV 4S/5S, P1, A2, Q2 And others, and we'll look at the parts that you need, the step-by-step configuration, and the typical errors, and we'll focus on the nuances that the manufacturer doesn't always specify in the official instructions, like how to get around the restrictions. MIUI TV Why some channels may not show even when set up correctly.

If you’ve tried to set up Tricolor on your Xiaomi and you’ve had problems, don’t be quick to blame the technology. 90% of the time, the reason is the wrong hardware selection, the wrong receiver settings, or the missing details when scanning channels, and our guide will help you avoid these errors and get a stable signal the first time.

What equipment will be needed to connect the Tricolor

Before you start setting up, make sure you have everything you need. Unlike cable, satellite broadcasting requires more complex preparation. Here's a full list of equipment and accessories:

• 📡 Satellite antenna (plate) with a diameter of at least 60 cm (for most regions of Russia) in the northern regions may require a dish 90 cm.
• 📶 converter (LNB) low noise (Inverto Black Ultra or similar is recommended). LNB.
• 🔌 Disec (DiSEqC) – if you connect multiple satellites (e.g. Tricolor) + NTV-Plus is not required for one operator.
• 📺 Tricolor receiver (Subset-top box) We can use models. GS B521M, GS C591 new GS U510. The alternative is built-in DVB-S2 TV set (if supported).
• 🔗 Cables and connectors: coaxial cable RG-6 (at least 5 meters), F-connectors for connection to the converter and receiver.
• ⚡ Power supply for the converter (if not built into the receiver).

Important: If your Xiaomi TV has a built-in DVB-S2 tuner (e.g., Mi TV Q2 75" or Mi TV P1 65"), you can do without an external console. However, the Tricolor will still need a properly tuned plate and converter to work. Check the availability of a tuner in the characteristics of your model - if you do not have one, you can not do without a receiver.

⚠️ Note: Not all Xiaomi TVs support satellite TV directly. TV 4A or Mi TV 4S (2019-2020 d) equipped only DVB-T2 (It's digital terrestrial TV, and it doesn't have a connector for connecting a satellite antenna, so you have to have an external receiver.

Preparing Xiaomi TV to connect Tricolor

Before you connect the antenna or receiver, you need to configure the TV itself, which will help avoid compatibility problems and ensure that satellite TV works correctly.

1. Update your TV firmware. Go to Settings → About TV → Update your system and install the latest version of MIUI TV. This is especially important for models in 2021-2026, where the manufacturer regularly fixes external device errors.
2. Set up a region. In Settings → Language and region, select Russia. This affects the available frequencies and broadcast standards.
3. Activate Developer Mode (optional). If you plan to use third-party apps to view Tricolor (e.g. Tricolor TV Online), enable USB debugging in Settings → About TV → MIUI TV version (click 7 times on the line with the version).

If you use an external receiver, connect it to the TV through HDMI-It is recommended to use the port. HDMI 2.0 (usually signed as ARC or eARC) for better image quality. After connecting, select the appropriate signal source on the Xiaomi remote (Source or Input button).

For models with built-in DVB-S2 tuner (e.g. Mi TV Q2), connect the coaxial cable directly to the SAT IN connector on the back of the TV. Make sure the cable is securely secured - weak contact can cause signal loss in windy weather.

Satellite antenna setting for Tricolor

The most important step is to properly set up and set up the plate, and that depends on the quality of the signal and the stability of the broadcast, and if you've never done this before, you'd better have a specialist, but if you want, you can do it yourself, following our instructions.

Step 1: Detection of direction to the satellite. Tricolor broadcasts from the satellite EUTELSAT 36E (36° East longitude). To accurately point the plate, use a compass or special applications, such as DishPointer (available for Android/iOS). Enter your coordinates, and the application will show the azimuth (direction) and the angle of place (tilt of the antenna).

Step 2: Install the antenna. Place the plate on the bracket, fix it on the wall or roof. It is important that there are no obstacles (trees, buildings) in front of the antenna. Point the plate towards the south (for most regions of Russia) and adjust the angle of inclination according to data from DishPointer.

Step 3: Connect and fine tune. Connect the cable to the converter and receiver (or TV), then turn the device on. In the receiver or TV menu, find the satellite settings section (Settings → Channels → Satellite antenna). Select the EUTELSAT 36E satellite and start the signal search. Slowly turn the plate left-right, watching the signal level scale. Optimal value is 70-100%.

⚠️ Note: If the signal level is less than 30% even after fine-tuning, check the integrity of the cable and connectors. A common problem is oxidation of the F connectors or damage to the cable wool. Also make sure that the converter is powered (usually served via a receiver or separate unit).

Search and setup of Tricolor channels on Xiaomi TV

Once the antenna is set up successfully, you can start scanning the channels, and the process is different depending on whether you're using an external receiver or an integrated tuner, and let's look at both.

Option 1: Configure via external receiver (set-top box)

If you have connected the Tricolor receiver to the TV via HDMI, further setting is performed on the console:

1. Turn on the receiver and wait for the load.
2. Go to the channel settings menu (usually the Menu button on the remote).
3. Select Channel Search → Manual search.
4. Specify parameters: Satellite: EUTELSAT 36E (36.0°E) Frequency: 12226 MHz Symbol velocity: 27500 Polarization: Horizontal (H) FEC: 3/4

Run a search. When you're done, save the channels you found.

If the channels are not found, check the satellite settings or reset the antenna. Sometimes it helps to reset the receiver to factory settings (Menu → Settings → Reset).

Option 2: Configure via built-in DVB-S2 tuner (for supported models)

For Xiaomi TVs with built-in satellite tuner (e.g. Mi TV Q2):

1. Go to Settings → Channels → Satellite antenna.
2. Select Add Satellite and select EUTELSAT 36E.
3. Enter transponder parameters: Frequency: 12226 MHz Symbol speed: 27500 Polarization: Horizontal (H) FEC: 3/4
4. Start an automatic channel search.

⚠️ Warning: If after all the manipulations, Tricolor channels have not worked, check the status of your access card on the operator's website. The tariff may have expired or you need to re-activate. 8 800 500-01-23 Or use your personal account.

💡

Most of the problems with Tricolor on Xiaomi TV are due to three factors: an incorrect antenna setup, outdated receiver or TV firmware, or errors in the connection of cables.

Additional features: Tricolor TV Online and MIUI TV

In addition to traditional satellite broadcasting, Tricolor subscribers can use Tricolor TV Online, a smart TV app that lets you watch channels over the Internet, which is convenient if you do not have the ability to install a plate or travel often.

To install the app on Xiaomi TV:

1. Open the App Store on your TV (GetApps icon).
2. In the search box, enter Tricolor TV Online.
3. Download and install the app.
4. Log in with a login and password from the personal account Tricolor.

Advantages of Tricolor TV Online:

• ✅ Access to channels without satellite antenna (only Internet speeds from 10 Mbps are needed).
• ✅ The ability to watch programs in recordings (function Tricolor Cinema and TV).
• ✅ Multiscreen – viewing on multiple devices at the same time.

However, there are limitations:

• ❌ Not all channels are available online (especially in the regional area).
• ❌ Requires a stable Internet connection (at speeds below 5 Mbps, slowdowns are possible).
• ❌ Some Xiaomi models TV You may not support the application due to restrictions MIUI TV.

Alternatively, you can use a MIUI TV with a DLNA or Miracast connection, for example, if you have a smartphone image on your TV, you can stream it to your TV, if you have the Tricolor mobile app on it.

1. Connect your phone and TV to the same Wi-Fi network.
2. On your TV, activate Miracast (Settings → Connection and Sharing → Wireless Display).
3. On your smartphone, turn on the screen broadcast function (in Android: Settings → Connected devices → Screen broadcast).

FAQ: Frequent questions about Tricolor on Xiaomi Smart TV