How to Install and Configure Channels on Xiaomi TV: The Complete Guide

Xiaomi Mi series TVs TV, Mi TV A, Mi TV P1 mi TV Q offers users the flexibility to customize on-air, cable and satellite TV, but menu interfaces and channel search algorithms are often questionable, especially for those who are first-time users of Android. TV Unlike traditional button-controlled TVs, setting up requires understanding the logic of a smart platform.

Many users mistakenly believe that it is enough to simply connect an antenna and start an auto-search, but in practice, the quality of the result depends on the right choice of the signal source, the type of connection (DVB-T2, DVB-C or DVB-S) This article will help you understand everything from basic settings to solving typical problems with no signal or snow on the screen.

We will look at three main scenarios: automatic search (the easiest way), manual adjustment (for power users), and addressing the lack of channels. TV P1 55"), which support both on-air and cable TV. If your TV doesn't find any channels, at the end of the article you'll find a checklist for troubleshooting.

1. Preparing Xiaomi TV to set up channels

Before you start looking for channels, make sure the TV is properly connected to the signal source (DVB-T2) You will need a room or street antenna with range support UHF (470-862 MHz) Cable TV (DVB-C) usually supplied by the provider along with coaxial cable and sometimes requires activation of the service through a personal account.

Important point: Xiaomi Mi TV Not all models are equipped CI-conditional-access module (CAM). If your ISP uses encoding (like NTV-Plus or Tricolor), check for a slot on the back. TV Q1E and newer usually support CI+ 1.4, and budget series (e.g. Mi) TV A Pro - no.

Also prepare:

• 📶 Antenna cable with an F connector (DSEqC switch may be required for satellite TV)
• 🔌 Power antenna (if you use an active antenna with an amplifier, turn on the option Power antenna: VKL in the settings)
• 📡 Provider data (for cable TV: frequency, flow rate, modulation – usually specified in the contract)
• 🔄 Remote control panel with working batteries (on some models of the button) TV activate the television mode)

On Xiaomi models with PatchWall OS (for example, Mi). TV 4S) The path to channel settings is different from Android TV. If you don’t have the TV tab, upgrade to version 3.0+ — In earlier versions, the television function was limited.

💡

If you connect a satellite dish, first check the signal level in the Settings menu. → TV → Satellite. → Manual scanning, optimal value - not less than 70% for a quality reception.

2. Automatic channel search: step-by-step instructions

This is the easiest way to do this, and it works for most users: the algorithm automatically detects the available multiplexes (channel packets) and stores them in the TV's memory. Importantly, before you start autosearch, turn off all additional devices (such as consoles or game consoles) to avoid signal conflicts.

Instructions for Android TV (Mi TV Q, Mi TV P1, Mi TV A2):

1. Press the Home button on the remote and select the TV tab (antenna icon).
2. Go to Settings. → Sources → Tweaking of TV channels.
3. Select the signal type: 📺 On-air TV (DVB-T/T2) — room-street antenna 📡 Cable TV (DVB-C) — for providers such as "Rostelecom" or "MTS" 🛰️ Satellite TV (DVB-S/S2) — for plates "Tricolor", "NTV-Plus"

"Auto search"

After searching, the TV will offer to save the found channels - confirm the action.

For models with PatchWall (Mi) TV 4A, 4S, 4X):

1. Press the Menu button on the remote and select "TV settings".
2. Go to Channel Settings → Search engine.
3. Please indicate the country (Russia or Ukraine for correct frequency determination).
4. Select the source: “Antenna" (DVB-T2) or "Cable" (DVB-C).
5. Start the search and wait for the result.
6. Cable TV will require data from the provider: 📡 Frequency (for example, 314 MHz for Rostelecom in St. Petersburg). 📈 Flow rate (6875 kSimv/s). 🔄 Modulation (256) QAM).

"Scanning."

If you don’t know the exact settings for manual settings, you can find them:

• 📄 On the provider's website (section "Equipment settings").
• 📞 In support (inform the TV model and connection address).
• 🔍 Searching through a TV model + the name of the provider (e.g., "Mi" TV P1 MTS setting").

Example of parameters for popular providers:

Sorting and management of channels

After a successful search, the TV stores the channels in random order, to organize the list:

1. Go to Settings. → TV → Channel management.
2. Select "Change Order" and drag and drop channels using the remote (Up/Down buttons) + OK).
3. To remove unnecessary channels, highlight them and press Menu. → Delete.
4. For grouping (for example, "Sports", "Children"), use the option "Folders".

On PatchWall models, sorting is done through the TV settings menu. → You can edit the list:

• 🔖 Add to your favorites (star next to the channel name).
• 🔍 Hide channels (they will remain in memory, but will not appear in the list).
• 🔄 Update logos (if incorrect icons are displayed).

If no changes are saved after sorting, reset the channel list:

1. Go to Settings. → TV → Resetting TV settings.
2. Confirm the action (default password is 0000 or 1234).
3. Run a second search engine.

⚠️ Note: On some Xiaomi Mi models TV (Like Mi. TV 4A 32) after resetting channels, the broadcast region may be lost. Before re-searching, make sure that the settings indicate the correct Region (Russia/Ukraine/Kazakhstan) - this affects the scanning frequencies.

5. Solving Channel Configuration Problems

If the TV doesn’t find channels or shows a message “No signal”, check the following points:

Problem 1: No signal (0% level)

• 📶 Check the connection of the antenna/cable to the connector ANT IN (don't confuse HDMI or AV).
• 🔌 If you are using an active antenna, turn on the option Power antenna: On in the settings.
• 📡 For satellite TV, check the plate alignment (signal level should be) ≥70%).
• 🔄 Restart the TV (Power button on the remote hold 10 seconds).

Problem 2: Not all channels are found

• 📍 Make sure that the settings indicate the correct region (country).
• 🔍 Run a second search with other options (for example, choose Full Scan instead of Quick Scan).
• 📶 Check if other equipment (Wi-Fi routers, microwaves) is blocking the signal).
• 📄 Update the channel list through the Settings menu → TV → Update channels.

Problem 3: Canals found but not shown (black screen or snow)

• 🔄 Check the type of modulation in manual settings (for example, for DVB-C should be 256. QAM).
• 📶 Make sure the signal level is at least 50% (in the manual setting menu) → Signal level).
• 🔧 Reset TV settings to factory (Settings) → TV → Resetting TV settings).
• 📡 For satellite TV, check that the right satellite is selected (e.g. Eutelsat) 36E for Tricolor").

⚠️ Attention: On the TVs Xiaomi Mi TV Q1E mi TV P1 latest-stitched (MIUI TV 3.0+) There may be a conflict between the built-in tuner and external consoles (for example, MAG-If the channels are gone after you plug in the console, turn it off and restart the TV.

💡

If the TV doesn't find any channels, check the physical connection of the antenna/cable first, then the region settings and signal type. 90% of the time, the problem lies in the wrong source (DVB-T2 instead DVB-C vice versa).

6.Tune in. IPTV Xiaomi Mi TV

If you use IPTV (You don't need the on-air and cable channels, you need to install a special app and download a playlist from the provider:

• 📺 SS IPTV (Free, supports formats.m3u and.xspf).
• 🎬 Lazy IPTV (Paid version with extended functions).
• 📡 TiviMate (optimized for Android) TV, have a trial period).

To set up IPTV:

1. Install the app from Google Play Market (click Home on the remote). → Apps → Search).
2. Download the playlist from the provider (file with extension.m3u).
3. In the application, select "Add playlist" and specify the path to the file (you can download from the cloud or enter it). URL).
4. Save the settings and wait for the list of channels to load.

For ease of management:

• 🔖 Create a favorite for frequently viewed channels.
• 📺 Set up. EPG (Electronic transmission program – many playlists support this function.
• 🔄 Use parental controls if you want to restrict access to certain channels.

If IPTV slows down":

• 📶 Check the internet speed (for Full) HD need ≥15 Mbps).
• 🔌 Connect the TV to the router via cable (LAN) instead of Wi-Fi.
• 🔧 In the application settings, reduce the buffer (Buffer size option).
• 📡 Try another playlist (some providers limit the number of connections).

7. Update firmware to fix tuner problems

If the TV suddenly stopped finding channels that used to work, the reason may lie in outdated firmware. the manufacturer regularly releases updates that correct tuner errors and add support for new broadcast standards (for example, the manufacturer releases updates that correct the tuner errors, DVB-T2 HEVC channel-permit 4K).

To update the firmware:

1. Go to Settings → About TV → System Update.
2. Click "Check Updates."
3. If a new version is available, confirm the installation (the TV will restart automatically).

If the automatic update does not work:

• 📥 Download the firmware from the official Xiaomi website (select the TV model).
• 📁 Copy the file to USB-storage device FAT32, The file name should not contain Cyrillic).
• 🔌 Connect the flash drive to the TV and go to Settings → On TV. → Update through USB.

⚠️ Attention: On Xiaomi Mi models TV 4S mi TV 4A Firmware older than 2021 may not support new multiplexes (e.g., third package) DVB-T2). In this case, the firmware update is mandatory - otherwise some channels will not be available.

Up-to-date firmware versions for popular models (2026):

FAQ: Frequent questions about setting up channels on Xiaomi Mi TV