How to remove the hanging of Xiaomi phone: a complete guide to eliminating lags

The situation when your favorite gadget stops responding to touch, familiar to every owner of Xiaomi. The screen freezes on the logo, applications stop closing, and the system ignores any attempts to interact. Panic at this point is not worth it, since in most cases the problem is solved by software methods without contacting the service center.

The reasons for this behavior can be very different: from a banal lack of RAM to critical errors in the file system. Modern Snapdragon and MediaTek processors installed in Redmi and Poco devices are able to process huge amounts of data, but even they sometimes can not cope with software conflicts. Understanding the nature of the failure is the first step to successfully reanimating your device.

In this article, we will take a look at all the existing ways to eliminate the freezes, learn how to perform forced reboot, clear the cache and use hidden diagnostic tools. It is important to act consistently, moving from simple methods to more complex ones, so as not to aggravate the situation and save user data.

Forced reset as the main method

The most effective and safe way to bring a device back to life is by resetting the hardware, and if the screen is out but the phone is warming, or if the image is frozen and the sensor is not working, this method will help in 90% of cases, and the mechanism of action is simple: the power circuit of the processor is broken at the software level, which causes the system to start again.

To perform the procedure, you need to pinch and hold the power button for a long time. Standard short pressing here will not help, since the system ignores interruptions. You will need to hold the key for about 10-15 seconds until the screen is completely turned off.

⚠️ Warning: Do not attempt to remove the battery if your smartphone model is non-removable.Opening the back cover will result in loss of warranty and may damage the plumes.

In some models, especially the Redmi Note series or Poco F, the combination may be different. If a single clamping didn't work, try to press the volume and power buttons at the same time. This activates a low-level reset of the power controller.

Using Recovery Mode to Reset Cache

If a simple reboot failed and the phone freezes on the screensaver again, you need to go to recovery mode.Recovery Mode is a separate software environment that boots to the main Android operating system and allows you to perform diagnostic operations.

This mode is entered on Xiaomi devices by a combination of keys when the device is off. You will need to press the Volume Up and the power button. Hold them until the Mi logo or Recovery menu appears. The navigation in this menu is done by volume buttons, and the choice is by the power button.

One of the main reasons for the freeze is overcrowded or damaged cache system. In the Recovery menu, select the option Wipe Cache (if available) or Wipe Data. Be careful: the second option will delete all your personal files, so use it only as a last resort.

Once you've cleaned, select Reboot and then Reboot to System. The phone will start as normal. The first run after a reset may take longer than usual, which is normal, as the system reassembles temporary files.

Diagnostics via Fastboot and ADB

For more advanced users, Fastboot mode is available. It's a protocol that allows you to interact with the device directly through the device. USB-If the phone freezes and doesn't respond to anything other than a PC connection, this method can be a life-saving tool.

To enter Fastboot mode on Xiaomi, turn off your phone and press the Volume Down and Power button at the same time. The screen will show an image of a hare repairing an android, or the words FASTBOOT. Connect the device to a computer with ADB drivers installed.

You can send a command to restart from the command line on your computer, open the terminal and type in the following instructions:

adb reboot

If the standard reboot doesn’t work, you can try the command to force you to exit the standby mode:

adb reboot bootloader

This method is especially useful when the touch screen is not working completely and you can’t control the device in the usual ways, but it requires that the phone has previously been enabled debugging over USB.

⚠️ Attention: Use of teams ADB Introducing incorrect commands, such as fastboot erase, can lead to complete data loss and the need to flash the device.

Analysis of causes of hanging and conflict resolution

Understanding why your smartphone is behaving in an unstable way can help prevent it from happening again, and third-party apps that aren’t optimized for your version of MIUI or HyperOS are often the culprits.

Special attention should be paid to applications that run in the background. Antiviruses, memory cleaners and modified versions of popular social networks often cause resource conflicts. If a freeze occurs when a particular program is launched, try to remove it or find an alternative.

Also, the cause may be an internal memory overflow: When less than 10% of the space is available, the file system is slower, and virtual memory cannot expand efficiently. Regularly check the storage through the Settings path → About phone → Storage.

The table below gives the main symptoms and probable causes:

Resetting to factory settings: a radical method

When all methods are exhausted and the phone continues to freeze, the final software argument is Hard Reset, which completely erases all data from the device, returning it to the “out of the box” state, which is guaranteed to eliminate software errors, but requires prior backup.

You can reset through the Recovery menu mentioned above. Select Wipe Data, then confirm the action by selecting Wipe All Data. The process can take a few minutes. Once complete, select Reboot.

There is also an alternative way through the phone's menu, if it does occasionally respond to touch. Go to Settings → About Phone → Reset → Erase all data. The system will request a password from the Mi Account to verify the identity of the owner.

💡

Before performing a complete reset, be sure to remove the memory card. SD and SIM-map so that they do not accidentally format their contents.

Once reset, the phone will take longer to load. Don't rush to install all the apps at once. Give the system a full framework update and optimize the work. This can take up to 30 minutes.

Prevention of hangings in the future

To avoid the question of how to remove the hangover of Xiaomi phone, you need to follow certain rules of operation: modern operating systems require care as much as a car. Regular maintenance prolongs the life of the device.

First of all, keep an eye out for system updates. Xiaomi engineers are constantly releasing patches that fix security bugs and optimize the processor. You can check for updates in the Settings menu → About Phone → MIUI version.

Second, don't overload the autoboot. Dozens of apps running with your phone eat up resources. Turn off autoruns for programs you don't use daily. → Permits → Auto-start.

💡

Regularly restarting your smartphone (at least once a week) cleanses RAM and prevents the accumulation of system debris, reducing the risk of freezes by 40%.

Also, you should avoid installing applications from unknown sources. APK-files downloaded from dubious sites often contain malicious code that mines cryptocurrency in the background, causing overheating and lags.

When Professional Assistance is Required

Not all freezes can be fixed software. If the problem persists after a complete reset and flashing, there is a possible hardware malfunction, it can be a retiring display plume, flash memory degradation, or a motherboard problem.

Pay attention to physical signs, such as the battery bloating, the presence of moisture inside the housing or severe mechanical damage, in which cases self-repair can be dangerous.

If the phone is warranty-free, any attempt to open or use unofficial firmware will void warranty obligations, in which case the best solution is to contact an authorized service center Xiaomi.