How to Remove Swipe Up When Unblocking on Xiaomi: The Complete Guide

Many Xiaomi, Redmi and POCO smartphone users running MIUI or HyperOS shells experience intrusive behavior when the screen wakes up. Instead of instant access to the desktop or widgets, the device requires a mandatory swipe up, even if you have already successfully unlocked the gadget with a fingerprint scanner or Face ID. This action, conceived by developers to improve security and demonstrate lockscreen, often annoys those who are used to an instant start.

This delay disrupts the usual use case, especially when the phone needs to be used urgently. Android’s standard logic implies that successful biometric authorization should immediately open the last active interface, but in the Xiaomi ecosystem, this process is often interrupted by an intermediate lock screen. Understanding how the unlock mechanism works will allow you to customize the device to your own.

In this detailed guide, we will look at all the ways to address this inconvenience, not only the standard system settings, which are often hidden in non-obvious menus, but also more advanced methods, including working with system applications. It is important to understand that the interface may vary depending on the firmware version and region.

Some methods will require careful attention, as security settings in new versions of HyperOS have become more stringent. However, with the right sequence of actions, you can return your smartphone to the desired responsiveness. Let's start with basic settings that are available to everyone without the need for root permissions.

Analysis of the causes of the appearance of an additional swipe

Before we make any changes, we need to understand why the system behaves this way. The main reason is the security concept embedded in MIUI, which separates the authentication process from the access to personal data. Even if the fingerprint matched, the system may feel it is necessary to show notifications or widgets on the lock screen before full access.

Often users confuse this swipe with the Wallpaper Carousel function or the active lock screen, but in reality, it is the standard behavior of the fingerprint scanner, which by default does not go directly to the desktop, this is done in order to prevent accidental access if the finger was applied unconsciously while the phone was lying in your pocket or on the table.

⚠️ Warning: Changing system security settings may affect the display of notifications on the lock screen. Make sure you understand what data will be visible without fully unlocking the device.

Also, it is worth considering that different versions of shells may have different logics, such as global versions of MIUI, which may be more conservative than Chinese builds, and understanding this difference helps you find the right items in the settings menu.

Basic setting of the lock screen and passwords

The first step to fix this problem is to carefully check the standard security settings, and this is where the main switches that control the behavior of the screen when you wake up are located. → Passwords and security → Lock screen. This is where the key parameters that affect access speed are hidden.

In this menu, you should pay attention to the option “Show lock screen after unlocking” or similar wording, depending on translation. If this option is active, disabling it should lead to the desired result – instantaneous transition to the desktop after scanning the fingerprint.

• 🔍 Go to the main menu settings of your smartphone.
• 🔐 Select the "Passwords and Security" or "Screen Lock" section".
• 📱 Find the item responsible for behavior after unlocking.
• 🚫 Turn off the forced swipe option if it is available.

If you don't find an obvious switch, try changing the type of lock screen. PIN-code or vice versa can reset some interface bugs. Also check if wallpaper carousel is enabled, as it often blocks direct access to the desktop, requiring a swipe to view a new image.

It's important to note that in some cases, it helps to simply restart the device after changing the settings. Android needs to properly apply the new security settings. Don't ignore this step, as cached data can retain the old behavior of the interface.

Using the "Security" application for fine-tuning

In the Xiaomi ecosystem, there is a system application called Security that duplicates many of the features of standard settings, but has deeper access to certain parameters. This is often where hidden settings affect the operation of the fingerprint scanner are located. Open the application with a green shield icon and go to the Privacy Protection section.

Inside this section, look for "Private folder" or "Hidden apps." While this may not be related to the lock screen at first glance, this is where global biometric security switches can be located. In some versions of MIUI, disabling "Enhanced Protection" in this menu allows you to unlock your phone instantly, bypassing the lock screen.

You should also check the settings of the fingerprint scanner itself. Go to Settings → Passwords and Security → Fingerprints. This can be "Sleep Unlock" or "Speed Unlock"; activating or deactivating these features can dramatically change the sensor's algorithm.

⚠️ Warning: Disabling enhanced protection features may make your biometrics less secure in the event of a device loss.

If standard methods don’t work, you can try removing Security updates or clearing your cache. Go to Settings → Apps → All Apps → Security and select Clear Data, which will return your security settings to factory values, sometimes solving conflicting parameters.

Disconnecting Wallpaper and Widget Carousel

One of the most common reasons for the mandatory swipe up is the Wallpaper Carousel feature, which automatically changes the image on the lock screen and often blocks direct access to the system, requiring a confirmation or swipe from the user. To check this, go to Settings → Lock screen.

Find the wallpaper carousel (or wallpaper carousel) and turn it off. Once turned off, the system will stop downloading new images and, more importantly, will no longer require additional input, which is especially true for users who prefer static wallpaper or their own photos.

Also, look out for widgets placed on the lock screen itself. If there are too many of them or they require data updates every time the screen is turned on, this can cause a delay. Remove all widgets from the lock screen, leaving only the time and date to check if the unlock speed changes.

Advanced Methods through ADB and System Commands

If the software settings don't work, you can use a more powerful tool, USB debugging and the ADB command line, which allows you to make changes to system configuration files that are not available through the normal interface, and you need a computer and installed ADB drivers.

First thing you need to do is activate the developer mode. Go to Settings. → About the phone and quickly press 7 times on the item "Version" MIUI" (or "Version". OS"). After that, a new section "Additional" or "Extended settings" will appear in the settings menu, where you need to turn on "Debugging by USB".

adb shell settings put secure lock_screen_show_after_unlock 0

This command tries to force the lock screen display to be disabled after successful authentication, enter it in the command line on the computer by connecting the smartphone with a cable, and if the command is successful, the system must immediately apply the changes without having to restart.

⚠️ Attention: Use ADB Introducing incorrect commands can lead to unstable system operation or resetting. Only execute commands that you are sure of assigning.

You can also try resetting the Keyguard component settings via ADB. Enter the command adb shell pm clear com.android.keyguard. This will clear the data of the component responsible for the lock screen and return it to its original state, which often eliminates the software glitches that cause delays.

Comparison of behavior in MIUI and HyperOS

With the release of the new HyperOS shell, many users have noticed a change in the logic of how the security system works. Unlike MIUI, where many settings were scattered across different menus, HyperOS developers have tried to centralize management, but at the same time tightened security requirements, which means that some crutches that worked in MIUI 14 may not work in the new system.

In HyperOS, it is more common to see swipe up as an integral part of unlock animation, and it is almost impossible to remove it with standard tools without losing the functionality of widgets, where optimizing the fingerprint scanner itself, rather than bypassing the lock screen, comes to the fore.

💡

HyperOS prioritizes security and ecosystem integration, so removing the intervening unlock screen completely can be limited to system-level developers.

Users who upgrade to HyperOS are encouraged to check the settings in the Lock Screen section again, as the location of the items may have changed, and it is also worth noting that on different models (for example, Xiaomi 14 vs. Redmi Note 13), the behavior may differ even on one version of the software due to differences in the hardware of the sensors.

Additional recommendations and alternative solutions

If none of the above methods have helped to completely remove the swipe, you can consider alternative ways to speed up access to the phone, such as using the Smart Unlock feature, which allows you to keep the phone unlocked when it is near a trusted Bluetooth device, such as a Mi Band smartwatch or headphones.

It's also worth checking if you have a third-party theme installed. Some themes downloaded from the Mi Themes store may have their own hard-coded unlock animations that overlap the system settings. Try switching to the standard Classic or Basic theme to rule this out.

• ⌚ Use Smart Unlock with a clock for instant access.
• 🎨 Reset the theme to standard for inspection.
• 🔄 Update the system to the latest available version.
• 📵 Turn off all widgets on the lock screen.

In extreme cases, if the problem has recently appeared, you can reset your phone to factory settings.This action will completely delete all your data, so be sure to back up important files before starting the procedure.Reset often eliminates deep system errors accumulated during the time you use the device.

💡

Before resetting the settings, try just turning off the phone, extract SIM-card, wait 1 minute, insert SIM It can sometimes help to reset the communication module errors that affect unlocking.