How to remove recovery on Xiaomi devices: all working methods

Recovery (or “intelligent recovery”) on Xiaomi devices is a frequent questioning feature that automatically optimizes screen brightness, color reproduction, and even sound depending on the content, but doesn’t always work correctly. Many people face problems such as too dark images in movies, distorted colors in games, or spontaneously changing the volume. If you want to regain full control of settings, this article will help you figure out how to completely disable recovery on TVs, smartphones, and other gadgets of the brand.

It is important to understand that Xiaomi implements recovery at different levels: from hardware (in firmware) to software (in shell). MIUI The methods of disabling will vary depending on the type of device and version of the software. We will look at current ways for Android TVs. TV, smartphone MIUI 12-14, And we're going to focus on the hidden settings that the manufacturer doesn't advertise in the standard interface.

Before you start making changes, check the firmware version of your device. On TVs, path: Settings → On TV. → Software version. On smartphones: Settings → The phone. → Version. MIUI. This will help to avoid mistakes when choosing a method.

What is Recovery in Xiaomi Devices and Why You Should Turn It Off

Recovery, in the context of Xiaomi, is a set of algorithms that analyze the content on the screen in real time and adjust the display parameters. The technology is borrowed from premium brands like Sony (there it is called X-Reality Pro), but in low-end devices often works with errors.

• 🎬 Color distortion in movies: actors’ skin turns orange, sky unnaturally blue.
• 🎮 Delays in games: Recovery adds lag due to post-processing.
• 🔊 Volume jumps: The sound is spontaneously muffled in dynamic scenes.
• 🌓 Unstable brightness: screen flickers when scenes in video change.

The manufacturer describes the feature as “image quality improvement,” but in practice it often interferes with rather than helps. OLED-In the case of the Xiaomi Mi, the regeneration can accelerate the burnout of pixels due to uneven backlighting. TV Q2/Q1E Redmi Smart TV X algorithms are more aggressive than flagship models, which is due to savings on hardware components.

Disabling the recovery will return the "honest" image without software distortion.

• 🎨 Designers and photographers working with color correction.
• 🎮 Gamers, where the minimum input delay is important.
• 🍿 Cinematographers who appreciate the original color reproduction of the director.

How to turn off recovery on Xiaomi TVs (Android) TV/PatchWall)

On Xiaomi TVs, recovery is hidden under different names depending on the model and firmware version": AI Picture Quality, Dynamic Contrast, Color Enhancement, or Adaptive Brightness. Consider step-by-step instructions for different interfaces.

Method 1: Using PatchWall Standard Settings

This method works for most models of 2020-2026 (Mi) TV Q2 2023, Redmi Smart TV X55 Follow the algorithm:

1. Open Settings (cog in the upper right corner of the main screen).
2. Go to the Display and Sound section → Picture.
3. Find the parameters: AI Picture Quality - disable slider. Dynamic Contrast - set to off. Color Enhancement - select No.

Image mode

Customized

Game.

After applying the changes, restart the TV (Settings) → The device → Reboot. That'll reset the GPU cache.

PatchWall settings open|AI Picture Quality is off|Dynamic Contrast is offline|Image mode - User-generated|TV rebooted-->

Method 2: Engineering menu (for advanced users)

If the standard settings don't work, you'll have to use a hidden engineering menu, which is a method that works for Android TVs. TV 9-12, but requires caution – incorrect changes can lead to failures.

Instructions:

1. Turn on the TV and connect the keyboard via Bluetooth or USB (remote control won't do).
2. Open the Terminal Emulator app (install from Google Play if not available).
3. Enter the command: adb shell am start -n com.android.tv.settings/.development.DevelopmentSettings If ADB not configured, use an alternative path: quickly click on the remote → Back up. → Down. → Down. → Up. → Up. → Left. → Right. → Left. → Right. → OK (Conami code).
4. In the Engineering Menu, find Picture Settings and disable Auto Color Temperature Dynamic Backlight Control. AI Scene Detection

⚠️ Warning: Changes to the engineering menu are not saved after the firmware update.

Method 3: Firmware rollback (extreme case)

On some models, the Mi TV 4S 55", Mi TV 4A) The recovery is hard-stitched into the firmware and doesn't shut down in the standard way. The only radical method is to roll back to an earlier version of the software that didn't have the function. TV Q1E firmware will do V12.2.1.19 (2021).

Instructions for rollback:

1. Download the desired firmware version from the official Xiaomi website (the support section of your model).
2. Unpack the archive and place the update.zip file on the FAT32 flash drive.
3. Connect the flash drive to the TV and go to Settings → About TV → Software Update → Local Update.
4. Select the file and confirm the rollback.

⚠️ Note: Firmware rollback resets all settings and may result in loss of warranty.Before the procedure, back up important data (for example, a list of channels).

💡

On Xiaomi TVs, recovery is often disguised as a "AI-Optimization. Turn off all settings with a mention AI, Dynamic or Adaptive is the key to a clean image.

Disabling recovery on Xiaomi smartphones (MIUI)

On smartphones Xiaomi, Redmi and POCO Recovery is achieved through two components: Adaptive Brightness (adaptive brightness) and AI Color Enhancement: Unlike televisions, you can turn it off without an engineering menu, but the path depends on the version. MIUI.

MIUI 12–14: Standard Method

For modern versions of the shell (MIUI 13/14 Xiaomi 13, Redmi Note 12 etc.):

1. Open the Settings → Display.
2. Turn off: Adaptive brightness (slider off). Color auto-adjustment (in the Color and Contrast submenu); Reading in the dark (if present).

Additionally. → Special facilities → Color correction

No.

For models with AMOLED-screens (Xiaomi) 12T, POCO F5) further disconnect DC Dimming in Settings → Display. → It's also a function that reduces flickering, but it distorts colors.

MIUI 11 and older: An alternative path

On older versions (Redmi Note 9, Mi) 9T) Recovery can be hidden deeper:

1. Go to Settings. → System system → Advanced settings.
2. Select For Developers (if no item, tap 7 times on the Version) MIUI phone).
3. Find and Disable: Adaptive Brightness (Improving) Color Optimization MIUI Automatic Color Temperature

⚠️ Note: On some devices (Mi 10 Ultra, Black Shark 4), the developer-side disabling resets after the reboot, in which case only unlocking the bootloader and installing custom firmware (e.g. LineageOS) will help).

Problems after turning off recovery on smartphones

After deactivating the algorithms, you may encounter:

• 🔋 Fast battery discharge – adaptive brightness saved charge.
• 🌡️ Overheating of the screen - without automatic adjustment OLED may overheat.
• 🎨 Unnatural colors – if the sRGB profile has been previously activated.

Decisions:

• 🔋 Use manual brightness adjustment at 50-70%.
• 🌡️ Install the app CPU Monitor for temperature control.
• 🎨 Enable the Saturated Profile in the screen settings for color balance.

💡

If the colors become dull after turning off the recovery, try calibrating the screen through the Screen Balance app (available on Google Play).

Universal methods of disabling recovery

If the standard methods didn’t work, try the one-stop solutions that are right for most Xiaomi devices.

Method 1: Through ADB-teams (without root)

This method works on Android 8.0+ It doesn't require super-user rights:

• Computer with installed ADB-driver.
• USB-TypeC cable (original).
• USB Debugging enabled (Settings → About Phone → MIUI Version → 7 taps → For developers → USB debugging).

Instructions:

1. Connect the device to the PC and open the command line (Win)+R → cmd).
2. Enter the commands in order: adb shell settings put global adaptive_brightness_enabled 0 adb shell settings put global auto_color_temperature_enabled 0 adb shell settings put global ai_scene_detection_enabled 0
3. Reset the device.

For TVs, the team will be different:

adb shell settings put global tv_ai_pq_enabled 0

Method 2: Using Magisk Modules (for root)

If you have unlocked the bootloader and installed Magisk, you can use the modules:

1. Install Magisk Manager and download the Disable module MIUI Recuperation from the repository.
2. Activate the module and restart the device.
3. Check the screen settings – the recovery points should disappear.

Popular modules:

• 📱 MIUI Optimizations Disabler – Disable everything AI-optimization.
• 🖥️ Universal GMS Doze – blocks the background recovery processes.

Frequent mistakes and their solutions

When you turn off recovery, users often face typical problems, and let's look at the most common ones and how to fix them.

⚠️ Note: On Xiaomi TVs with MediaTek processors (Redmi Smart) TV X) disabling recovery may result in artifacts when played HDR-In this case, it is recommended to use an external media player (for example, Kodi) with hardware acceleration disabled.

Alternative solutions: if recovery cannot be turned off

On some devices (e.g., Mi) TV P1 Or Xiaomi Pad 6, the recovery is hard-stitched into the firmware and doesn't shut down in the standard way:

• 🖥️ External processor: Connect NVIDIA Shield or Apple TV through HDMI — They will process the signal without distortion.
• 🎮 Game mode: On TVs, activate Game Mode in settings HDMI-Port - it turns off post-processing.
• 📺 Screen calibration: Use the DisplayCAL calibrator to manually adjust colors.
• 🔧 Firmware replacement: Install custom firmware (like LineageOS for smartphones).

For smartphones, an effective solution will be to install an alternative launcher (for example, Nova Launcher) with the shutdown of all MIUI-It's not going to eliminate the recovery completely, but it's going to reduce the impact on the interface.

⚠️ Note: On Xiaomi TVs with Google TV (Like Mi. TV Q2 2023) The recovery is partly managed by Google services, and to disable it, you will have to uninstall the Android System Intelligence app updates. → Annexes → Show system-based → Android System Intelligence → Remove updates).

FAQ: Answers to popular questions