How to remove error reports Xiaomi: step-by-step instructions

Owners of Xiaomi and Redmi smartphones often face a situation when a system notification suddenly appears on the screen about the failure of the application or the MIUI shell itself. This annoying phenomenon not only overlaps the content, but can significantly reduce the performance of the device, causing the processor to work idle. Usually such messages indicate that some background process has incorrectly completed its work, but in most cases the user does not need detailed information about it.

MiuiDaemon’s analytics system is set up by default to collect data on each crash to send reports to developers. However, for the average user, this feature often becomes a source of constant visual noise. HyperOS and older firmware have a similar notification architecture, so the methods of solving the problem are universal. These pop-ups cannot be ignored, since they can block access to important interface functions at the most inopportune time.

In this article, we will discuss proven ways to completely get rid of intrusive reports. You will learn to turn off the statistics service, clear the cache of problem components and use special commands to deep tune. Disabling system reports does not violate the warranty and does not require root rights, which makes the procedure safe for any level of training. Follow the instructions carefully to return your gadget to a clean interface.

Reasons for System Failure Notifications

Before you start fixing a problem, you need to understand the nature of the problem. Most often, a pop-up with the text "Process does not respond" or "Send an error report" appears due to a conflict of application versions. After an operating system update, some installed programs may not work stable, causing cyclical errors that the system tries to fix.

Another common cause is a crowded cache of system services: the analytics components of MIUI accumulate huge amounts of temporary files. When the memory limit for these files is exhausted or the data structure is damaged, the service starts to run in emergency mode, constantly generating new notifications, this is especially true for devices that have been in use for more than two years without a complete reinstallation of the software.

Also consider the impact of third-party launchers and modifications: If you installed themes from unverified sources or used third-party shells, they may have made changes to system files, in which case SystemUI or other critical processes may crash every time you turn on the screen or launch heavy applications.

Disabling the Analytics Service through Settings

The easiest and safest way to stop the notification stream is to limit the permissions of the system analytics service, which does not delete files completely, but prevents the program from sending data and, more importantly, showing the user reports about its work.

Find a section that might be called Passwords and Security or simply Security, depending on your firmware version. Inside this menu, look for Privacy. This is where the settings governing stat collection hide. You need to find the "Join the Quality Improvement Program" or "Send Usage Data" switch.

Once you have moved the sliders to an inactive position, the system will stop initiating the reporting process. However, in some cases this is not enough and requires a deeper intervention in the operation of a particular application.

In the list of all applications (don't forget to switch to the All Apps tab), find a service called Analytics or MiuiDaemon. By clicking on it, you will be taken to the management menu.

• 📱 Select “Other Permits” and disable network access if this option is available in your Android version.
• 🔒 Click Stop to forcefully terminate the current service process.
• 🗑️ Select “Clean” and then “Clean Everything” to remove accumulated error logs.
• 🚫 If possible, turn off auto-start for this component.

If the problem is chronic and returns after a reboot, more radical measures will be required, as described in the following sections.

Cleaning of cache and system components data

Sometimes, simply turning off the settings doesn't help, because the device's memory is left with corrupted log files, the system tries to process them, fails, and again throws out the error report, in which case the effective measure is to completely clean up the system applications responsible for the interface and notifications.

You will need access to the application management menu again. This time, focus on the Security and System Interface components. Be careful: cleaning the system interface data may temporarily reset desktop settings, such as the location of icons, but your personal files (photos, contacts) will remain intact.

The sequence of actions should be as follows: go to Settings → Applications → All applications. Find the Security app (green icon with a shield). Go to its storage and click on Clear Data. Confirm action. Then repeat the procedure for the System UI application.

Once cleaned, it is recommended to reboot the device, allowing the system to recreate fresh, undamaged configuration files, and if the error cycle repeats after the smartphone is turned on, then the problem lies deeper, possibly in the conflict of updates to Google Play Services.

Using ADB commands for advanced users

For those who are not afraid to work with a computer, there is the most effective method - the use of debugging. USB and command line ADB. This allows you to completely freeze or delete the packet responsible for the reports, without having to obtain super-user rights, USB-cable and installed driver ADB.

First, activate the developer mode on your phone. To do this, quickly click seven times on the build number in the About Phone section. Then, in the Developer menu that appears, turn on USB Debugging. Connect your smartphone to your computer and open the command line in the ADB folder.

Enter a command to check the connection:

adb devices

You'll see a debugging request on your phone screen, click "Allow." If the console displays the serial number of the device, the connection is successful. You can now type in a command to delete or freeze the analytics packet. Depending on the firmware version, the package can be called differently.

Use one of the following commands:

adb shell pm uninstall -k --user 0 com.miui.misda


adb shell pm uninstall -k --user 0 com.miui.analytics

The first command disables the data collection demon, the second one disables the analytics application, and once the command is executed, the system will no longer be able to generate reports, because the executable file will not be available to run, and this is guaranteed to solve the problem 99% of the time.

💡

Save a list of packages before deleting. Before removing system components through ADB, run pm list packages > packages.txt so that you can restore the original state if you make an error.

Comparison of error-elimination methods

The choice of method depends on your technical background and the severity of the problem. Below is a table that will help determine the best solution for your situation. Each method has its advantages and risks that must be considered.

As you can see from the table, using ADB is the best thing, but it requires a computer and a little bit of care when you type commands. The methods through settings are suitable for those who want to quickly solve a problem without connecting to a PC. If none of the software methods worked, there may be a hardware memory malfunction.

💡

The most reliable way to remove reports is to completely remove the analytics package through ADB, but this requires caution and a computer.

What to do if the error comes back

There are times when notifications continue to appear after all the actions you have taken, which may indicate that the source of the error is not in system analytics, but in a particular application you have recently installed.

Try to remove the latest installed applications or roll back updates. Especially often conflicts are caused by memory cleaners, antiviruses from unknown developers and modified versions of popular social networks. MIUI under the heading “On the telephone».

⚠️ Note: If error reports appear immediately after the phone is turned on, before the screen is unlocked, this may indicate damage to the system partition. In this case, it is recommended to perform a full reset (Wipe Data) through Recovery Mode, previously saving important data.

In rare cases, the reason is incompatible version of Android with the installed version of Google Play Services. Try to clear the data of the service Google Play through the app menu. If this does not help, the only way out is to flash the device through the computer using the official tool Mi Flash Tool.

Prevention of systemic failures

To avoid such problems in the future, you should adhere to several rules of operation of Xiaomi smartphones. First of all, avoid installing applications from third-party sources. APK files downloaded from unverified sites often contain errors in the code that cause conflicts with the system.

Clean your device memory regularly. Overcrowded storage is one of the main reasons MIUI is unstable. Try to keep 15-20% of your internal memory free, which will give the system space for temporary files and cache to work properly.

• 🔄 Do not interrupt the system update process, even if it seems to be suspended.
• 📉 Avoid using memory boosters and boosters from third-party developers.
• 🔋 Keep an eye on the battery, as power surges can cause software failures.

Adhering to these simple guidelines will prolong the life of your device and ensure a stable interface, and remember that a modern operating system is a complex mechanism that requires care and timely maintenance.