How to stream video to Xiaomi projector: all ways + mistake-making

Why Xiaomi Projector Translation Can Be More Difficult Than It Seems

Xiaomi projectors are among the most popular home theater devices due to their combination of price, quality and functionality. 4K Often, they have problems trying to stream video from a phone, laptop, or TV set-top box, and the reasons are not only in the settings of the projector itself, but also in the features of the signal sources, video formats, and even in the firmware versions.

This article will not just list the ways to connect – we will analyze specific errors (for example, the lack of sound when broadcasting from an iPhone or the delay of the image when wirelessly connecting), compare wired and wireless methods in speed and stability, and give recommendations for optimizing the picture for different scenarios: from watching movies to playing games on PlayStation or Xbox.

If you've already tried to connect and you get a message like No signal or Unsupported format, there's a section in the article that addresses these issues, and for those who are just planning to buy, we've added a comparison table of supported formats for different Xiaomi models.

1. Wired connection: HDMI and USB-C — When you need maximum stability

Wired methods remain the most reliable for streaming video to a Xiaomi projector, especially when it comes to video transmission. 4K-Most models (e.g. Mi Laser Projector) are content or games where latency is critical. 150" or Mi Smart Projector 2) ported HDMI 2.0, maintains permission up to 3840×2160 upon 60 Hz. But there are nuances:

• 📺 HDMI-cable: use certified High Speed cables (marked on the flyby). Cheap Chinese counterparts may not transmit 4K or HDR.
• 💻 Laptops with USB-C: If your laptop (such as a MacBook Pro or Xiaomi Mi Notebook) has only one USB-C, You'll need an adapter. USB-C → HDMI. Make sure the adapter supports DisplayPort Alt Mode.
• 🎮 Game consoles: for PS5 Xbox Series X is required HDMI 2.1 for 4K/120 Hz, but most Xiaomi projectors are limited HDMI 2.0 (maximum 4K/60 Hz).

Important point: if the projector does not recognize the signal HDMI, try:

1. Reboot both the source (laptop/set-top box) and the projector.
2. In the projector menu (Settings) → System system → Entrance: Manually select source HDMI.
3. Check if the laptop mode is activated only the second screen (in Windows: Win) + P → Only the second screen).

⚠️ Note: When connecting through HDMI Xiaomi projectors with Android TV (For example, Mi Smart Projector 2 Pro, you may have a sound conflict. If you have an image but no sound, check the projector settings for sound output. HDMI or external speakers).

Use the cable HDMI 2.0 or higher|

Check for DisplayPort Alt Mode support USB-C|

Select the right source in the projector menu|

Disable energy saving modes on the laptop|

Update the graphics card drivers (for PC)

-->

2. Wireless streaming: Miracast, AirPlay and Wi-Fi Direct

Wireless technology is convenient, but often suffers from latency and loss of quality. Xiaomi projectors support several protocols:

• 📱 Miracast (Screen Mirroring): runs on Android and Windows 10/11. To activate on the projector go to Settings → Connections → Wireless projection.
• 🍎 AirPlay: Available only on Android models TV 10+ (For example, the Mi Smart Projector. 2 Pro. Requires the projector to be connected and iPhone/iPad single-wire.
• 🌐 Wi-Fi Direct: allows you to broadcast without a router, but can slow down at high resolution. → Network → Wi-Fi Direct.

The main problems of wireless broadcasting:

For iPhones and MacBooks, streaming via AirPlay is usually more stable than Miracast, but requires:

1. Updates to the latest firmware (check in Settings) → About the device → Updating the system).
2. Shutdowns VPN on an Apple device (can block the flow).
3. Use of a support router 802.11ac (Wi-Fi 5) or newer.

Wire (HDMI/USB-C) |

Wireless (Miracast/AirPlay)|

Through the console (TV Box)|

I haven't tried it yet.

-->

3. Telephone broadcast: features of Android and iOS

Connecting a smartphone to a Xiaomi projector can be done in a number of ways, but the algorithms for Android and iOS are different.

For Android smartphones (Xiaomi, Samsung, Google Pixel, etc.)

Most devices on Android 8.0+ Miracast (or Wireless Display) is supported:

1. On the projector: Settings → Connections → Wireless projection.
2. On the phone: Settings → Connections → Screen broadcast (or Smart View from Samsung).
3. Select your projector name from the list.

If there is no option, check:

• 🔄 Update the firmware of the phone and projector.
• 📶 Connecting to a single Wi-Fi network (or using Wi-Fi Direct).
• 🔌 Disabling the power saving mode on the phone.

For iPhone (iOS)

Apple doesn't support Miracast, so AirPlay is the only wireless option, but it doesn't work on all Xiaomi models.

• ✅ Mi Smart Projector 2 Pro with Android TV 10).
• ✅ Xiaomi Laser Projector 2 (after upgrade) MIUI TV 2.0).
• ❌ Mi Smart Projector Youth Edition (No AirPlay Support).

If AirPlay is not working:

1. Reboot the projector and iPhone.
2. In the projector settings, turn on Settings → System system → AirPlay.
3. On the iPhone at Control Point, press Screen Mirror and select a projector.

⚠️ Note: When streaming from iPhone via AirPlay, Xiaomi projectors may not play videos from some apps (e.g. Netflix or Disney)+) constraint DRM. The solution is to use HDMI-Lightning adapter (official from Apple).

💡

If the broadcast from the phone slows down, lower the screen resolution in the developer settings (Settings) → The phone. → Build number - tap 7 times, then Settings → System system → For developers → Minimum width).

4. Broadcast from PC (Windows, macOS, Linux)

Connecting your computer to a Xiaomi projector depends on the operating system. Let's look at all the options.

Windows 10/11

For Miracast (wireless broadcast):

1. On the projector, turn on the wireless projection.
2. On PC: Win + K → select a projector from a list.
3. If the device is not found, check for Miracast support: type in the command line dxdiag, then check the Miracast string in the System Information section.

For wired connection through HDMI:

• 🖥️ Press Win. + P and select Second Screen Only or Duplicate.
• 🔧 If the projector is not defined, update the graphics card drivers (NVIDIA, AMD Intel).

macOS

MacBook does not support Miracast, but you can use:

• 🔌 HDMI-Adapter (recommended by Apple) USB-C Digital AV Multiport Adapter).
• 📶 AirPlay (if the projector supports, see the section above).
• 🖥️ Mirror software (e.g. ApowerMirror or Reflector).

Linux

Ubuntu, Fedora and other distributions may require additional packages to be installed for Miracast:

sudo apt install wireless-tools iw wpa-supplicant

To set up:

1. Install gnome-network-displays:
2. Restart the system and enable Screen Sharing in the settings.

5. Broadcast from consoles and media players (Apple) TV, Fire Stick, Xiaomi TV Box)

If you use external devices (such as Apple) TV 4K, Amazon Fire Stick or Xiaomi Mi Box S, connecting to Xiaomi's projector usually doesn't cause problems:

• 📦 Apple TV: plug-in HDMI, But you can use Siri Remote or Apple app to manage it. TV iPhone.
• 🔥 Fire Stick: Requires power from USB (Included with a Xiaomi projector usually goes USB-In Fire Stick settings, select the resolution supported by the projector (e.g., the port for this, 1920×1080@60Hz Mi Smart Projector Youth).
• 📺 Xiaomi Mi Box: Optimal for Xiaomi projectors, as it uses the same firmware (MIUI TV). Supports Dolby Vision and HDR10.

General recommendations:

1. Use the cables. HDMI High speed (especially for high speed) 4K HDR).
2. In the setup, turn off the consoles. HDMI-CEC, if the projector does not respond to the remote.
3. For Fire Stick and Apple TV in the sound settings select PCM Dolby Digital is used when the sound is interrupted.

⚠️ Note: When using Amazon Fire Stick on Xiaomi projectors with the resolution below 1080p (For example, Mi Smart Projector Lite, you can see the edges of the image being cropped. Solution: In the Fire Stick settings, set the resolution to 720p and turn on the screen calibration.

💡

For maximum compatibility with consoles, use Xiaomi projectors on Android TV 9.0 and higher – they support most codecs (H.265, VP9, Dolby Audio).

6. Video Quality Optimization: Permission, HDR, sound

Even if the broadcast works, the quality of the image and sound can be disappointing.

Permission and frequency of staff

Xiaomi projectors support different resolutions depending on the model:

To avoid problems with resolution:

• 🖥️ On PC in screen settings, select the recommended resolution for the projector.
• 📺 On consoles (Fire Stick, Apple) TV) Manually set the resolution supported by the projector.
• 🎮 For games on PS5/Xbox turn off 120 Hz if the projector supports only 60 Hz.

HDR color profiles

If HDR-The content appears too dark or over-lit:

1. On the projector, set the mode. HDR In Settings → Display. → Image mode.
2. In sources (such as Netflix or YouTube) check that the video is in fact available on the Internet. HDR (usually marked 🌟).
3. For Windows: in graphics settings (Win) + I → System system → Display. → Graphics) select profile HDR.

Sound: codec and delays

Frequent problems with sound:

• 🔊 No sound: check if the sound on the projector is turned off (Settings) → Sound. → The exit has to be HDMI or internal dynamics).
• 🎵 Sound delay: in the source sound settings (PC, console) disable audio processing (Sound Improvements in Windows).
• 📵 Crack or interrupt: Try another cable HDMI or lower the bitrate of the sound (for example, from Dolby Atmos to the PCM).

💡

To calibrate the color on Xiaomi projectors, use Cinema mode in the image settings and turn off Dynamic contrast – this will reduce post-processing and improve the naturalness of the picture.

7. Solving common mistakes

Even with the right connection, you can have errors.

Error: "No signal" or "No signal"

Possible causes and solutions:

• 🔌 The problem with the cable: try another HDMI-cable (preferably with High Speed labeling).
• 🔄 Wrong source: On the projector remote, press the Source button and select HDMI.
• 🖥️ Permissions conflict: Temporarily set permission on PC 1280×720, Then return the right one.
• 🔋 Energy saving: on some laptops (Xiaomi Mi Notebook) turn off Charge saving in power settings.

Error: "Unsupported format" or "Unsupported format"

This error occurs when the projector cannot decode the video.

• 🎬 Codecs: Convert video to H.264 or H.265 (For example, through HandBrake).
• 📁 Containers: Xiaomi projectors work better with.mp4 and.mkv than with.avi or.mov.
• 🔊 Sound: If you have a problem with sound, change the audio track to AAC or MP3.

Error: Lag (Lag) during wireless broadcasting

Latency over 100 ms makes watching movies and games impossible.

• 📶 Wi-Fi: Switch to 5 GHz (in router settings).
• 📱 Miracast/AirPlay: lower the broadcast resolution to 720p.
• 🖧 Interference: Disable other devices that use Wi-Fi (smartphones, smart lamps).
• 🔌 Power: Connect the projector to the network, rather than using the battery (if it is a portable model).

⚠️ Note: On Xiaomi projectors with firmware older MIUI TV 1.5 wireless 4K Impossible – Maximum resolution of Miracast/AirPlay limitedly 1080p. Update the firmware through Settings → About the device → Updating the system.

8. Alternative methods of broadcasting: DLNA, Plex, Chromecast

If standard methods are not suitable, alternative technologies may be used.

DLNA (for example, through VLC or BubbleUPnP)

DLNA It allows you to stream video over a local network without mirroring the screen:

1. On the projector, install the application DLNA-server (e.g., LocalCast or VLC).
2. On your PC or phone, open the video in VLC, press Reproduction. → Playback device and select projector.

Pros:

• ✅ No lag (unlike Miracast).
• ✅ Support for subtitles and multichannel sound.

Cons:

• ❌ Not all formats are supported (e.g, DTS-HD may not reproduce).
• ❌ Network setup required.

Google Chromecast (built-in or external)

Some Xiaomi models (such as the Mi Smart Projector 2 Pro) have built-in support for Google Cast. If not, you can connect an external Chromecast to the Google Cast. HDMI-The advantages of the port:

• 🎯 Simple stream from YouTube, Netflix, Google Photos.
• 📱 Support for Android and iOS.

How to set up:

1. Connect the Chromecast to the projector and set it up via the Google Home app.
2. In apps (like YouTube), click the Cast button and select your Chromecast.

Plex or Kodi

For the organization of a home media server:

• 🖥️ Install Plex Media Server on PC.
• 📺 Install a Plex or Kodi client on the projector.
• 🌐 Add movie folders to the Plex library and stream without loss of quality.

This solution is ideal for large video collections, as it supports:

• 🎬 Automatic recognition of films and TV series.
• 🔊 Transcoding on the fly (if the format is not supported by the projector).
• 📱 Remote control from a smartphone.

💡

Translating local files without loss of quality DLNA or Plex is preferable Miracast/AirPlay, It does not depend on the capacity of Wi-Fi.

FAQ: Answers to Frequent Questions