How to remove the speed limit on a Xiaomi scooter: safe and proven ways

Xiaomi scooters are some of the most popular vehicles, but factory speed limits often disappoint owners. Depending on the model, top speeds can range from 20 to 25 km/h, which is not always acceptable to experienced riders. However, removing restrictions is not just a matter of pressing a couple of buttons. It is important to understand the technical nuances, possible safety risks and legal aspects.

In this article, we will analyze all the current ways to unlock speed on Xiaomi scooters M365, Pro, Pro 2, 1S, Essential and other models, you'll learn what works in 2026, what tools you'll need, and how to minimize the negative impacts that you'll have, and why sometimes it's best to leave things as they are.

Why Xiaomi is limiting the speed of scooters?

The manufacturer sets speed limits for a reason.

• 🛡️ User safety: High speed increases the risk of falls and injuries, especially for beginners.
• 📜 Compliance with the law: in most countries (including Russia) electric scooters are equated to pedestrians, and their speed should not exceed 20-25 km/h.
• 🔋 Battery safety: Constant driving at high speeds reduces battery life.
• 🛠️ Warranty obligations: any interference with the firmware automatically voids the warranty.

Xiaomi scooters are initially positioned as urban vehicles rather than sports devices, and their design (brakes, suspension, tires) are not always designed to run above 30 km/h.

Official and informal ways to remove restrictions

All methods of unlocking speed can be divided into two categories:

1. Official (through proprietary software) - safe, but give a minimum increase.
2. Unofficial (firmware, controller modification) - risky, but allow you to accelerate to the maximum. 35-40 km/h.

Let's look at each one in more detail.

1. Official method: "Sport" mode in the Mi Home app

The easiest and safest method is to activate the sport mode through the Mi Home app (or Xiaomi Home for new models), which works on most scooters, including the Mi Home app. M365, Pro, 1S Essential.

Download and install the Mi Home app (App) Store/Google Play)

Connect the scooter to the application via Bluetooth

Go to Scooter Settings → Driving modes

Choose Sport Mode and confirm your choice

-->

In sport mode, the maximum speed increases by 2-5 km/h (depending on model) for example, for Xiaomi M365 limit increases with 25 before 28-30 mph/h, however, this method has limitations:

• ⚠️ Does not work on scooters with firmware 1.5.0 and newer (the manufacturer has removed this option).
• ⚠️ On some models (for example, Pro 2) sports mode is blocked after software updates.

💡

If the app does not have a Sport Mode option, try rolling back the scooter firmware to an older version.

2. Informal methods: firmware and modification of the controller

For those who want to increase their speed significantly. 35-40 km/h), informal methods exist, require technical skills and are risky:

• 🔧 Firmware via custom software (for example, DownG or ScooterHacking Utility).
• 🔌 Controller modification (resistor soldering or chip replacement).
• 📱 Use of alternative applications (e.g., use of alternative applications, M365 Tools or XiaoFlasher).

Let's look at each method in more detail.

Firmware scooter through DownG: step-by-step instructions

DownG is one of the most popular customized software for overclocking scooter Xiaomi.

• 🚀 Increase speed to 35-40 km/h (depending on model).
• 🔋 Disable battery power limit (drive to full discharge).
• 🛠️ Set up the response of the throttle and brakes.

There are, however, downsides:

⚠️ Warning: Firmware through DownG voids warranty and can cause the controller to overheat or fire the battery when driving at high speed for long periods of time.

If you are prepared for the risks, follow the instructions:

Download the archive with firmware from the official website downg.com

Install drivers for STM32 (If you are using Windows)

Prepare the cable. USB-TTL (for example, FT232RL)

Charge the scooter to at least 50%

-->

Next, follow the following steps:

1. Open the scooter body and find the firmware ports (usually located under a rubber plug next to the controller).
2. Connect. USB-TTL port UART (contact: TX, RX, GND).
3. Run DownG and select your scooter model.
4. Press Connect and wait for the controller to be determined.
5. In the Speed Settings menu, set the desired maximum speed (we recommend no more than 35 km / h).
6. Press Flash and wait for the firmware to complete (don’t turn off the cable!).

Once the firmware is in place, the scooter will automatically restart. Check the new speed using the Mi Home app or GPS-speedometer.

Modification of the controller: soldering of resistors

Another way to unlock speed is to physically modify the controller, which is suitable for Xiaomi models. M365, Pro and 1S, where the speed is limited by the resistors on the board.

The idea is that the controller board has resistors that limit the current that is fed to the motor, and by replacing them with resistors with different resistance, you can increase power and, accordingly, speed.

For modification will need:

• 🔧 soldering iron with a thin sting.
• 🔍 A magnifying glass or microscope (resistors are very small).
• 🧲 Solder and flux.
• 🔌 Multimeter for testing resistance.

⚠️ Warning: Incorrect soldering can short circuit and cause the controller to fail. SMD-Components, it is better to entrust it to a professional.

Step-by-step:

1. Open the scooter body and remove the controller.
2. Find resistors. R17 and R18 (Your location can be specified in the scheme for your model).
3. Carefully drink the stock resistors.
4. Install new resistors with less resistance (see table above).
5. Check with a multimeter that there is no short circuit.
6. Get a scooter and test it.

💡

The controller modification gives you a more stable overclocking than firmware, but requires soldering skills, which is not reset after software updates.

Use of alternative applications (M365 Tools, XiaoFlasher)

If you don’t want to disassemble the scooter or stitch it up, you can try alternative apps that allow you to change settings via Bluetooth.

The most popular:

• 📱 M365 Tools – allows you to change speed, adjust the response of the throttle and even include cruise control.
• 📱 XiaoFlasher - utility for firmware and rollback software without indiscriminate scooter.
• 📱 ScooterHacking Utility – Advanced Tool for Fine Controller Customization.

Example of use M365 Tools:

1. Download and install the app (available for Android and iOS).
2. Connect the scooter via Bluetooth.
3. Go to the Speed Settings section.
4. Set the maximum speed you want (we recommend no higher than 30 km/h for safety).
5. Save the settings and restart the scooter.

Advantages of this method:

• ✅ No need to disassemble the scooter.
• ✅ You can return the stock settings at any time.
• ✅ Less risk than when running through UART.

Disadvantages:

• ❌ Not all models are supported (e.g., Xiaomi Pro 2 may not be connected).
• ❌ After updating the firmware settings can be reset.

Risks and consequences of lifting the speed limit

Before dispersing the scooter, read about the possible negative consequences:

In addition, at high speeds:

• 🚲 Deterioration of handling (especially on rough roads).
• 🛑 Increased stopping distance (stock brakes are not designed for 35)+ km/h).
• 🚨 Increased risk of accidents with pedestrians and cars.

⚠️ In Russia from 2023, electric scooters are equated to mopeds if their speed exceeds 25 km / h. This means that for legal driving, M category rights and insurance will be required.

Alternative ways to increase speed without risk

If you are not ready to sacrifice safety and warranty, but want to drive faster, try these methods:

• 🔋 Use the "Sport" mode in the stockware (gives) +2-5 km/h).
• 🛞 Change the wheels to slicks (reduce rolling resistance).
• 🔋 Monitor the pressure in the tires (optimally — 2.5-3.0 bar).
• 🏋️ Lose weight (remove unnecessary accessories, drive without a backpack).
• 🔄 Maintain the scooter regularly (clean the bearings, lubricate the chain).

These methods will increase the 1-3 You can also consider buying a more powerful model, for example, a more powerful model:

• Xiaomi Pro 2 (max. speed 25 km / h, but accelerates better).
• Ninebot Max G30 (up to 30 km/h in drainage).
• Kaabo Mantis (up to 40 km/h, but not a budget option).

FAQ: Frequent questions about the acceleration of scooters Xiaomi