How to reduce the sensitivity of the screen on Xiaomi Redmi Note: step-by-step instructions

The screen of the Xiaomi Redmi Note smartphone sometimes behaves too actively: it responds to light touches, accidental touches with the palm of the palm or even moisture on the hands. This is annoying when typing, playing or watching content. The problem is not always a hardware defect — often the fault of system settings, sensor drivers or third-party applications. In this article, we will discuss 5 working ways to reduce the sensitivity of the screen without losing functionality.

Many users mistakenly think that the only solution is to bring the phone to the service. In fact, 80 percent of the time, software customization helps: turn off gestures, calibrate the sensor or reset the display settings. We tested the methods on Redmi Note 10/11/12 and older models — most of the solutions are universal.

If the screen responds to touches even through a protective glass or film, check the quality first. Cheap accessories with low transparency can distort the sensor signal. The problem can also manifest after the MIUI update - new versions of the firmware sometimes lose factory sensitivity parameters.

Before you start settings, make sure that:

• 🧴 There is no cream, oil or moisture on your hands (Xiaomi sensor often works on fatty spots).
• 📱 Protective film/glass installed correctly, without bubbles and detachments.
• 🔄 The phone didn’t overheat before the problem occurred (high temperature can temporarily disrupt the sensor).

1. Calibration of the touch screen through the engineering menu

The most effective way is to manually calibrate the sensor through a hidden engineering menu, which works on all Redmi Note models, but it takes care: the wrong settings can make things worse.

To open the menu:

1. Open the Phone app.
2. Enter the combination: ##6484## (for MIUI 12 and later) or #4636## (for older versions).
3. Select Touch Screen Test or Touch Screen.

In the calibration menu, follow the instructions on the screen: you usually turn to the crosses that appear in different areas of the display. Don't skip the steps, this will cause calibration failure. Once completed, restart the phone.

⚠️ Warning: If after calibration the screen becomes less responsive to pressing, return the settings to the factory through the same section of the engineering menu (Reset Calibration item).

Some firmware may not have an engineering menu, so use an alternative method:

Make sure the battery is charged > 30%|Close all background applications|Remove the cover and the protective glass|Connect your phone to charge (optional)-->

2. disable gestures and unnecessary sensor functions

Modern Redmi Notes feature a variety of gestures that can conflict with basic touches, such as the “Double Tap to Wake” feature, which often works by accident in your pocket or when holding your phone.

To turn off the extra gestures:

1. Go to Settings → Display.
2. Select Extra → Gestures (or Smart Assistant → Gestures in MIUI 13+).
3. Turn it off: 👆 Awakening with a double touch 👇 Swipe down for notification panel (if interferes) 🔄 Screen rotation by gesture

Also check the settings of third-party apps that can intercept touches, such as Nova Launcher (POCO Launcher) or games with own gestures.

💡

If you use Full Screen Gestures, try switching to the classic buttons in Settings → System → Gestures → Full-screen gestures. This will reduce the load on the sensor.

Setting Sensitivity through ADB (for Power Users)

If standard methods don't work, you can change the sensor settings through ADB (Android Debug Bridge), which requires connecting the phone to a PC and basic command line knowledge.

Instructions:

1. Turn on Developer Mode: Go to Settings → About Phone and click on MIUI Version 7 times.
2. Return to Settings → Additional → For developers and activate Debugging over USB.
3. Connect the phone to your PC, open the command line and type: adb shell settings put system touch.pressure.scale 0.7 Here 0.7 is the sensitivity factor (range 0.1 to 1.0).
4. Reset the device.

To reset the parameters, use the command:

adb shell settings delete system touch.pressure.scale

⚠️ Attention: Inept use ADB It can cause your phone to malfunction. If you're not sure what you're doing, skip this method.

4. Update or rollback of MIUI firmware

Sometimes firmware bugs cause a screen to become more sensitive, like MIUI 12.5, where there was a problem with the sensor drivers on the Redmi Note 10 Pro, which was fixed in MIUI 13.

To check the relevance of the firmware:

1. Go to Settings → About the phone → System update.
2. Click Check Updates and install the latest version.

If the problem has occurred after the update, try to roll back to the previous version of MIUI.

1. Download the necessary firmware from the official Xiaomi website (Download → Archive section).
2. Go to Settings. → The phone. → Updating the system → Threefold (⋮) → Select a firmware file.
3. Install the downloaded file and restart the phone.

For diagnosis:

1. Check if the screen responds to touch in Safe Mode (press Power, hold Power off until you have a suggestion to go to Safe Mode). If the problem disappears, it is the fault of third-party software.
2. Connect your phone to your PC and check if touches are displayed correctly in adb shell getevent -l (touch coordinates should appear).

If the diagnosis confirmed a hardware malfunction, contact the Xiaomi service center. The cost of repairing the sensor on the Redmi Note varies from 2,500 to 6000 rubles depending on the model and the type of breakdown.

⚠️ Note: Do not use the services of "garage" masters to replace the sensor. Redmi Note often installs non-original modules that are used to replace the sensor. 2-3 months begin to "swim" or peel off.

Alternative solutions: protective accessories and applications

If you can’t reduce your sensitivity, try to avoid the problem:

• 🛡️ Install a matte protective glass – it reduces finger slip and occasional touches.
• 🎮 Use a gamepad or triggers for games (such as Black Shark Clip).
• 📱 Install the Touchscreen Repair app (available on Google Play) for additional calibration.

For owners of Redmi Note 10S and later, there is a proprietary Game Turbo feature that blocks random touches at the edges of the screen during games. Activated in Settings → Special Features → Game Turbo.

💡

If the screen only responds to touch in a certain area (e.g., on the edges), the problem is more hardware. Software methods are not going to help here, you need diagnostics in the service.

FAQ: Frequent questions about Redmi Note screen sensitivity