How to reduce the sensitivity of the screen on Xiaomi smartphones: step-by-step instructions

The sensitive screen on Xiaomi smartphones is both an advantage and a source of irritation. On the one hand, a quick response to touch makes the device smooth and responsive, on the other hand, excessive sensitivity leads to false positives: The problem is especially acute for owners of models with curved screens (Mi 11 Ultra, Redmi) and the occasional swipes during a conversation, unintentional taps when holding the phone or even activation of functions from wet fingers. K50 Pro) or Always-On Display devices where the sensor remains active even in sleep mode.

In this article, we’ll look at 7 proven ways to reduce screen sensitivity on Xiaomi, from standard MIUI settings to hidden engineering menu features. You’ll learn how to calibrate the touchscreen, disable interfering gestures, adjust insensitivity zones, and even physically protect the screen from false touches. All methods are tested on current versions of MIUI (14-15) and are suitable for most models of the brand, including POCO, Redmi and Xiaomi’s flagship series.

1.Calibration of the screen through the engineering menu

The engineering menu is a hidden settings section where you can manually adjust the touchscreen settings, and it requires caution, but it gives you maximum control over sensitivity, and importantly, the wrong settings can reverse the effect of making the screen less responsive.

To open the engineering menu:

1. Open the Phone app and enter the combination: ##3646633##.
2. Go to the Hardware Testing → Touch Screen section.
3. Select the Touch Screen Calibration option.

In this section, you'll see Touch Sensitivity or Touch Threshold settings. Values usually range from 1 (minimum sensitivity) to 10 (maximum sensitivity). The recommended value for reducing false positives is 3-5. After changing the settings, be sure to restart the device.

💡

If after calibration the screen stopped responding to light touches, return the value to 7-8 and repeat the test.

⚠️ Note: Not all Xiaomi models support manual calibration via the engineering menu. on some devices (e.g., on the same device, POCO F5) This section may be missing or blocked.

2. Disabling gestures and unnecessary touches

MIUI activates many gestures by default, which often cause random clicks, such as swiping on the bottom edge of the screen to go back or double tapping to wake up, and turning off unnecessary gestures will reduce the number of false positives.

How to turn off unnecessary gestures:

• 📱 Go to Settings. → Display. → Additionally. → Gestures.
• 🔄 Turn off options: Double tap to wake up (if the screen is activated in your pocket); Raise to wake up (may trigger when walking); Swipe down for the notification bar (if it interferes with reading).
• 🔍 For models with Always-On Display, turn off Touch to show the lock screen in the Settings section. → Lock screen.

If you use navigation gestures (swipes instead of buttons), try returning the classic navigation bar. Go to Settings → Display → Navigation Bar and select Buttons. This will reduce the number of random swipes around the edges of the screen.

3. setting up zones of insensitivity (Edge Rejection)

Many Xiaomi smartphones (especially those with curved screens) suffer from false touches on the edges. Edge Rejection allows you to create “dead zones” around the perimeter of the display, where the touchscreen will ignore touch, an option hidden in the developer’s settings.

How to activate Edge Rejection:

1. Turn on Developer Mode: Go to Settings → About Phone and click on MIUI Version 7 times.
2. Back to Settings → Additionally. → For developers.
3. Find the Edge Rejection option and activate it.
4. Adjust the width of the non-sensitive zone (recommended value is 5-10% of the screen width).

This method is particularly effective for thin-framed devices such as the Xiaomi 13 or Redmi Note 12 Pro+, where fingers often touch the edges of the screen when held.

4. Use of protective films and covers

Physical protection of the screen is a simple but effective way to reduce sensitivity: Thick protective glasses (from 0.3 mm) or mattling films reduce the accuracy of the touch screen, making it less susceptible to light touch. However, this method has the opposite side: the screen can become too “tight” for comfortable use.

Recommendations for the choice of protection:

• 🛡️ Matting films – reduce finger slip, reducing the number of random swipes.
• 🔲 Tempered glass with oleophobic coating - repel moisture and fat, which reduces false positives from wet fingers.
• 📱 High-sided covers – prevent touching the screen when lying on the phone or in your pocket.

For models with Always-On Display (such as Xiaomi 14), we recommend using magnetic lock cases. They automatically lock the screen when closed, eliminating accidental pressing.

⚠️ Attention: Low-cost, low-quality protective films can, on the contrary, increase the sensitivity of the screen due to static electricity).

5. Update firmware and reset settings

Sometimes the sensitivity of the screen is due to software errors, the manufacturer regularly releases MIUI updates, where the touchscreen bugs are fixed.

1. Go to Settings → About the phone → System update.
2. Click Check Updates and install the latest version of MIUI.

If the problem appears after the update, try resetting the screen settings to factory:

1. Open Settings → System → Resetting settings.
2. Select Reset all settings (without deleting data).

On some devices (for example, POCO X5 Pro) reset touchscreen settings is possible through the engineering menu: Hardware Testing → Touch Screen → Reset Touch Settings.

Alternative methods: annexes and ADB-team

If the standard settings didn’t work, you can use third-party utilities or commands from ADB (Android Debug Bridge), a method that is suitable for advanced users.

Popular apps for adjusting the touchscreen:

• 📱 Touchscreen Calibration – allows you to manually adjust sensitivity.
• 🛠️ Button Mapper – Blocks unnecessary gestures and screen areas.
• 🔧 ADB AppControl – manages settings through ADB manually.

For advanced users available ADB-For example, to turn off all wake-up gestures, do:

adb shell settings put global wake_gesture_enabled 0

To return the standard settings:

adb shell settings put global wake_gesture_enabled 1

⚠️ Attention: Use ADB requires unlocking the bootloader and may cause you to lose warranty.Before experimenting, back up your data via Settings → System system → Backup.

7. Hardware malfunctions: when to contact the service

If none of the software methods worked, the problem could be in the hardware.

• 🔴 The screen responds to touch without touching (self-pressing).
• 🌡️ Sensitivity varies with temperature (e.g., in the cold).
• 💥 On the screen appear “dead zones” or, conversely, areas with hypersensitivity.
• 🔄 The problem arose after falling or getting moisture.

In these cases, a diagnosis is required at the service center. The average cost of repairing the touchscreen on Xiaomi:

• Redmi series: 2,500–4,000 ₽;
• POCO: 3 000–5 000 ₽;
• Flagship models (Xiaomi) 13/14): 6 000–10 000 ₽.

Before visiting the service, check whether the warranty is valid. On the official website of Xiaomi you can check the status of warranty service by serial number of the device.

💡

If the smartphone is warranty, DO NOT disassemble it yourself and DO NOT use it. ADB-This could lead to a denial of free repairs.

Frequently asked questions