Modern Smart TVs from Xiaomi offer users not only access to streaming services, but also classic TV broadcasts – on-air, cable, satellite and IPTV. However, many owners face difficulties in the first setup: the TV does not find channels, image artifacts arise or sound is interrupted. In this article, we will analyze all the ways to connect TV channels to Xiaomi Mi TV, Mi TV Stick and other models, and solve typical problems.
It's important to understand that the setup process depends on the type of broadcast. For example, digital terrestrial TV (DVB-T2) will require an antenna and the correct orientation to the TV tower, and for IPTV - a stable Internet connection and a playlist from the provider. We'll look at each option separately, with step-by-step instructions and tips on signal optimization. If you just bought a Xiaomi TV or want to switch from analog to digital broadcast, this article will help avoid errors.
1. Preparing Xiaomi TV to set up channels
Before you start searching for channels, make sure your Xiaomi Smart TV is ready for the process.
- 📺 Connect the antenna or cable to the connector ANT IN (for on-air/cable TV) or HDMI/LAN (for IPTV). On the Mi models TV 4S/5X antenna connector is located on the back panel.
- 🔌 Check power: the TV must be connected to the network without the use of extension cords (they can interfere with the network).
- 📡 Orient the antenna towards the nearest TV tower (relevant to the DVB-T2). Use services like the CETV Map to determine the direction.
- 🌐 Connect to the Internet (for example, IPTV It is recommended to use an Ethernet cable, but Wi-Fi speeds from 15 Mbps will also work.
If you are setting up a satellite TV, you will need a receiver (such as the Xiaomi Mi Box S) and a properly configured dish. For Mi TV models with a built-in DVB-S2 tuner (such as the Mi TV Q1E), you do not need a receiver - the cable from the converter connects directly to the LNB IN connector.
⚠️ Attention: On Xiaomi TVs with firmware MIUI TV 3.0 and newer channel settings may differ. If your model does not find the TV antenna section, update the software via Settings → On TV. → Updating the system.
To check the current firmware version, go to Settings → About TV → MIUI TV version. Current versions (2023-2026) support all modern broadcast standards, including DVB-T2 HEVC (H.265) video compression.
2. setup of on-air (DVB-T2) and cable (DVB-C) television
The on-air and cable TV are customized via Xiaomi's built-in tuner. Here's the step-by-step instruction:
- Open the TV menu: Press the TV button (or Live TV on new models).
- Select the signal source: For terrestrial TV: Antenna (DVB-T/T2). For cable TV: Cable (DVB-C).
Run an automatic search.
Search engine
Quick search
A complete search.
Specify the parameters
- For DVB-T2: Select the country of Russia (or your region), the UHF frequency range.
- For DVB-C, enter the parameters from the provider (frequency, character transfer rate, modulation) and can be specified in the contract or on the operator's website.
- Wait until it's finished: it can take 5-15 minutes, and the channels you find will remain on the list.
Make sure the antenna is connected to the ANT IN| connector
Check the integrity of the cable (whether there are any overburdens or damages) |
Restart the TV (disconnect for 30 seconds) |
Update the channel list manually through the TV| menu
Try another antenna or signal amplifier-->
3. Connection of satellite television (DVB-S2)
Satellite TV on Xiaomi Smart TV requires more training than on-air TV.
- 📡 Satellite dish (tuned to a satellite, such as Yamal 402 or a satellite) ABS-2).
- 🔗 converter (LNB) Universal or Circular (depending on the satellite).
- 📶 DiSEqC switch (if several plates are connected).
- Run channel search: Select Search for transponders → Auto or enter data manually (frequency, speed, polarization).
Method 2: Third-party applications
- 📱 Install the application (for example, SS IPTV) Google Play (available on Mi) TV Android TV).
- 🔗 Download the playlist to the app via Settings → Playlists → Add URL.
- 🎯 Set up. EPG (electronic transmission program, if supported by your provider.
For stable operation of IPTV, it is recommended:
- 📶 Use a wired connection (Ethernet) instead of Wi-Fi.
- 🔄 Disable background updates of other applications in Settings → Annexes → Auto-start.
- 🛡️ Configure Quality of Service (QoS) on your router to prioritize traffic IPTV.