How to sync Xiaomi Airdots headphones with your phone

Modern wireless headphones have become an integral part of the digital lifestyle, offering freedom of movement and no entangled wires. However, the first contact between a gadget and a smartphone often causes difficulties for users who have just unpacked the device. The process of pairing Xiaomi Airdots and your phone is technically simple, but requires a strict sequence of actions to successfully connect.

If you’ve just purchased a wireless headphone, it’s important to understand that it’s not always ready to go right after you’re removed from the box. Often you need to activate manual pairing mode or reset previous settings if the device has already been used. In this article, we’ll take a look at all the synchronization steps so you can enjoy your favorite music without delays or sound issues.

The quality of the connection depends on the correctness of the initial steps. Incorrect connection can lead to the fact that only one earphone will work, or the sound will be transmitted with a noticeable delay.

Preparation of the device for first activation

Before you try to find a device in the Bluetooth list, you need to make sure that the headphones themselves are charged and ready to go. Often users are faced with a situation where the indicators do not light up, which indicates a deep discharge of the batteries. Place both earphones in the charging case and connect it to the power source for 15-20 minutes.

Note the indication: during charging, red light should be lit, and after full charge it will either go out or change to white (depending on the specific model, whether it is Mi True Wireless Earbuds Basic or newer versions).

Once you remove the headphones from the case, they will automatically go into standby mode. The initial activation usually occurs by itself, but if the indicators do not flash, you may need to force them to turn on. To do this, touch the touchpad on each earpiece and hold your finger for about 5 seconds until the characteristic beep or color change of the LED.

• 🔋 Check the charge in the case and the headphones themselves before the procedure.
• 🧼 Wipe the metal contacts with dry cloth if the device has been lying idle for a long time.
• 🎧 Remove both headphones at the same time to activate the mode TWS (True Wireless Stereo).
• 👁️ Make sure the LED lights respond to the retract from the charging case.

If you are not sure about the presence of such a film, check the equipment or try to slightly press the headphone in the case to activate the contact.

The process of pairing with Android smartphones

The Android operating system has many shells from different manufacturers, but the algorithm for connecting peripherals remains the same. First you need to activate the wireless module in the system settings of your smartphone, this can be done through the quick settings panel, swipe from top to bottom, or through the main menu of parameters.

Once Bluetooth is enabled, the phone will automatically search for available devices within range, at which point you need to put your Xiaomi Airdots in visibility mode, making sure the headphones are off (not connected to any device), press and hold the touch panels on both headphones simultaneously for about 5-7 seconds.

You'll see the lights flashing white quickly, which is a signal that the device is detectable, and the phone's screen should show the model name, for example, the Mi True Wireless EBs, on the list of available devices. Basic_R Or just AirDots. Click on that name to initiate a connection.

The system can request confirmation to create a pair or enter an access code. The standard code for most Xiaomi devices is 0000, but most often pairing occurs automatically without entering numbers. After a successful connection, you will hear a voice message "Connected" or similar, and the indicators on the headphones will flash less often or go out.

Connection settings on iOS (iPhone and iPad)

Owners of Apple equipment can also use Xiaomi headphones, since the audio protocol is universal. The process on iOS is almost identical to Android, but has its own nuances in the interface. Open the settings and go to the Bluetooth section, making sure that the slider is activated.

Put your headphones in pairing mode, holding the touch zones until the lights flash quickly. The iPhone screen in the "Other Devices" section should show the name of your headphones. Click on it to connect. iOS can issue a security profile warning that needs to be confirmed.

It’s worth noting that some specific features, such as showing the exact percentage of charge of each earbud in the widget, may not work properly without installing third-party apps from the App Store. However, the basic functionality – music playback and Calls – will work steadily.

⚠️ Note: If the iPhone sees only one headphone or the device name is not displayed correctly, try ignoring the device in the Bluetooth list, turn off the communication module and repeat the procedure again.

To improve the sound quality on iOS, you can go to the special features settings and change the balance or equalizer if the standard sound seems to you not saturated enough, and check whether the "Monoaudio" mode is on, which can interfere with the stereo effect.

Problem Solving: Only one headphone works

One of the most common problems users have is that the sound is played in only one earbud and the other is silent, because the left and right channels are out of sync with each other, not the phone, and the headphones must first connect to each other and then broadcast the sound to the phone.

To fix this, you need to reconnect (resynchronize). First remove the device from the Bluetooth list on the phone (forget device or turn off function) and then place both headphones back in the charging case and close the lid for 10 seconds.

If they don't connect automatically (the indicators flash differently or quickly), reset them to factory settings. To do this, press and hold the touchpads on both earbuds simultaneously for 20 seconds (sometimes up to 30 seconds) until the indicators flash red several times.

Once reset, the indicators should flash frequently, signaling that they are ready for a new pairing. Now find them again in the phone's Bluetooth menu and plug them in. This usually restores full stereo performance.

Using the Mi Wear app for advanced management

For owners of Android smartphones (especially not Xiaomi) and iPhone, it is recommended to use the official Mi Wear app (formerly Mi Fit) or Xiaomi Earbuds. These utilities allow you not only to control the charge level with high accuracy, but also to configure touch control.

You can reassign double or triple touch actions in the app, for example, to set up a voice assistant call instead of switching tracks, and you can also find headphones that make them sound if you lose them in the room.

Updating your firmware through the app is an important step for stable operation. Manufacturers periodically release patches that fix connection errors and improve noise reduction quality. Connect your headphones to your phone, open the app, and follow the instructions on the screen for updates.

• 📱 Exact display of left and right headphone charge separately.
• 🎛️ Flexible configuration of sensor commands (taps).
• 🔊 Set up equalizer and sound profiles.
• 🔍 Function "Finding headphones" through the sound signal.

⚠️ Warning: Don't interrupt the firmware update process and keep your headphones close to your phone. Interrupting may cause your headphones to stop turning on.

Gesture management and additional functions

Most Xiaomi Airdots models support control via touchpads. The standard configuration often includes double-touching to play/pause or answer a call. Triple-touching can call a voice assistant (Siri or Google Assistant).

Some models use long-term retention (about 2 seconds) of the left or right earphone to control volume, but the exact command set depends on the specific model version and regional firmware. A detailed gesture table can always be found in the manual or in the Mi Wear app.

If standard settings don’t suit you, using third-party Bluetooth device management apps can expand functionality, allowing you to create macros and fine-tune sensor response, although this requires some technical knowledge.

💡

To activate the voice assistant without touching your phone, make sure that your smartphone’s Bluetooth settings allow microphone sound transmission for calls.

Remember that using voice assistants too often can drain battery life faster.If you rarely use these features, it’s best to turn them off in the app or simply not activate them to extend battery life.

Frequently Asked Questions (FAQ)

💡

The most effective way to solve connection problems is to completely reset the headphone settings and re-pair “clean”, without the old profiles in the phone’s memory.