How to take a screenshot on Xiaomi 9C: the full guide

Creating a screenshot on modern smartphones is one of the basic functions necessary to save correspondence, payment checks or interesting moments from games. Owners of budget devices of the Redmi series often face the question of how to fix the image on the display, taking into account the features of the MIUI shell. For the Xiaomi Redmi 9C model, this process can be implemented in several ways, each of which has its advantages depending on the situation.

In this article, we will take a look at all the screenshots available, from classic physical buttons to advanced gestures, how to activate hidden system functions, configure automation, and what to do if standard methods have stopped working due to software failures. Understanding these nuances will allow you to maximize the use of your smartphone.

We will focus on the intricacies of working with the MIUI file system, where saved images have their own storage features. On Xiaomi 9C, screenshots are defaulted to the Screenshots folder in internal storage, rather than in the general camera gallery. This is an important technical point that beginners often miss when trying to find a file through standard conductors.

Classical method using physical buttons

The fastest and most time-tested way to capture the contents of the screen is by using a combination of hardware keys. This method works on all versions of the Android operating system and does not require any pre-tuning. On the Redmi 9C case, the buttons are located on the right side, making them convenient for right-hand grabbing.

To get a result, you need to simultaneously press and briefly hold the volume down and lock button. It is important that the press is synchronous: if you press one button before the other, the system will perceive this as a command to call the turn off menu or change the volume, usually enough to hold for 0.5-1 seconds.

The success of the operation is confirmed by the characteristic sound of the camera shutter (if the sound is on) and the flash of the screen. In the upper corner, a thumbnail of the picture taken will appear, which can be immediately edited or sent. If you fail the first time, try changing the rhythm of the pressing, as the calibration of the button sensors on different instances of the device may vary slightly.

• 📸 Press the “Loudness Down” and “Nutrition” buttons at the same time.
• ⏱ Hold the combination for about one second.
• 🔊 Wait for the sound signal and vibration.
• 🖼 Check the notification in the curtain or thumbnail in the corner.

It is worth noting that in some gaming applications or when watching a full-screen video, the reaction delay may be slightly higher, in which case the system may suggest using a floating menu, which will be discussed below. However, for most everyday tasks, such as copying text errors or saving QR-In the physical combination, the most reliable.

Use of the menu of additional functions and curtains

The MIUI shell installed on the Xiaomi 9C provides users with advanced control through software interfaces. If physical buttons are faulty or uncomfortable to use, you can turn to virtual tools, especially when you want to take a series of pictures in a row without risking damage to the mechanical parts of the smartphone.

The first option is to use a notification curtain. Swipe from top to bottom to open the control center, and find the screenshot icon. If it's not on the first page, swipe left or click the menu edit button to add this shortcut to the number of times you use, which allows you to take pictures with one hand when the second one is busy.

The second option is a feature menu, and you can see a floating button (usually a semicircular button) in the corner of the screen, which opens the action list when you click on it, and you can also click on the screenshot, and you can also use the Scrollingshot to create long images, and you can activate this feature in the settings along the way Additional Features → Floating Windows → Additional Features menu.

⚠️ Note: Additional Features menus may overlap interface elements in some applications, and it is recommended to adjust the transparency of the button or hide it automatically after use.

Using software methods gives flexibility, but requires battery power and processor resources. For RAM of a budget device, constant hanging in the background of unnecessary services may not be desirable, so activate them only when necessary. Otherwise, this is a convenient way to diversify the interaction with the gadget.

Setting and using gestures on three fingers

One of the most popular features in the Android enthusiast environment is to take a screenshot with your fingers moving across the screen. On Redmi 9C, this option is built into the system, but by default can be disabled to save resources or to avoid accidental activation.

To activate the three-finger image, you need to go to the settings section. The path may vary depending on the version of MIUI, but most often it is located at Settings → Additional Features → Screenshot or Settings → Advanced Settings → Screenshot. You need to find the three-finger screenshot switch and turn it into an active position.

Once activated, just swipe your three fingers from top to bottom across any part of the screen. The system instantly recognizes the gesture, makes a sound, and saves the image. This is especially convenient when you hold the phone in one hand or it is lying on the table. The gesture works in almost all applications, except for some secure banking programs.

• 🖐 Open the settings of the smartphone system.
• 🔍 Find the section "Additional functions».
• 👆 Activate the switchboard "Screenshot with three fingers».
• ✌ Swipe three fingers down the screen to check.

💡

If the three-finger gesture doesn't work, try increasing your speed or using wider finger coverage, and make sure there's no multi-touch protective film on the screen.

Note that the use of gestures requires a good touchscreen condition. If there are cracks or severe scuffs on the Xiaomi 9C screen, the sensitivity may be reduced, and the system does not recognize the touch of three points at once, in which case it is better to return to the use of buttons.

Creating long screenshots and recording screen

Modern users often face the need to save long correspondence in the messenger or web page that does not fit on a single screen. Standard screenshot in this case is powerless, but MIUI offers a solution in the form of a Scrollingshot function or a long screenshot. This allows you to sew several images into one long tape.

It starts as usual, you take a normal screenshot in any convenient way, and immediately after that, a thumbnail appears in the corner, and it will have a button with arrows down on it, or it will say "Scroll" on it, and you press it, you make the screen scroll down, grab new content, and you can stop the process at any time by touching the screen.

The screen recording feature deserves special attention. Although the issue was about static images, users of Xiaomi 9C often need to capture a dynamic process. In the notification curtain there is a corresponding widget “Screen recording” that allows you to capture what is happening on the display along with sound (internal or through the microphone).

💡

A long screenshot is automatically cropped off by the system if the content is too long. For very large pages, it is better to take a few regular shots.

When using screen recording or long panoramic images, the load on the processor increases. On the budget processor MediaTek Helio G35, which is installed in the 9C, this can cause the interface to slow down.

Gallery work and screenshot file management

Once an image is created, it’s important to know where to look and how to manage it. Unlike the photos taken with the camera, screenshots on the Xiaomi 9C end up on a separate album, which is made for easy sorting, as screenshots are often temporary and don’t require years of storage.

When you open the standard Gallery app, you'll see an album called Screenshots, and inside, files are sorted by date of creation, and MIUI also automatically recognizes content: if there's text in the screenshot, it can be copied through smart recognition (the feature is not available in all firmware versions, but is often found in global builds).

For more advanced file management, you can use the Explorer Explorer built-in. Screenshots are on the path of Internal Memory → MIUI → Gallery → cloudcache or in the Pictures → Screenshots root folder. Knowing the exact path is useful when cleaning memory or transferring files to a computer.

• 📂 Open the Gallery or Files app».
• 📁 Go to the album "Screenshots».
• ✂ Use the built-in editor for cropping.
• 🗑 Remove the extra space to vacate the space.

⚠️ Note: When cleaning your memory through system utilities, be careful: screenshots with important information (passwords, codes) can be deleted automatically if they are marked as “junk».

Screenshot editing is available immediately after you create it. By clicking on the thumbnail, you can add text, draw over an image, or blur sensitive data. It's a built-in toolkit that eliminates the need to install third-party apps for basic graphics processing.

Problem Solving and Frequently Asked Questions

Despite the simplicity of the feature, Xiaomi 9C users sometimes face difficulties.