How to take a screenshot on Xiaomi Redmi: all ways + hidden MIUI features

Taking a screenshot on a Xiaomi Redmi smartphone seems like a simple task — until you encounter unexpected problems. The combination of buttons does not work because of the case, the gesture with your fingers refuses to work after the MIUI update, then the button disappears in the notification curtain. And if you want to capture a long web page or a scrolling screen? Standard instructions often keep silent about the nuances that cause users to lose minutes (and sometimes hours) to find a solution.

In this article, we will discuss all the current ways to create screenshots on Redmi – from classic to little-known, including hidden features. MIUI 14/15. You'll learn how to take a screenshot on models with and without physical buttons, what to do if screenshots aren't saved, and how to automate the process with gestures. MIUI, where this function is not officially available.

1. Classic method: power buttons + volume

The most versatile method that works on all Redmi models – from the budget Redmi A1 to the flagship Redmi K60 Pro.

1. Open on the screen what you want to shoot (application, web page, dialogue).
2. At the same time, press the power button (on/off) and the volume reduction button.
3. Hold them for 1-2 seconds until you hear the sound of the camera shutter and see the animation of the screenshot.

⚠️ Note: Some models (e.g. Redmi Note 11 Pro)+ 5G) The sensitivity of the buttons may vary:

• 🔧 Check if the case blocks access to the buttons (especially important for bumpers with high sides).
• 🔄 Try to press the buttons not at the same time, but with minimal lag (first power, after 0.1 seconds - volume).
• 📱 Make sure there are no system dialogs on the screen (such as an update request) – they can block the creation of screenshots.

💡

If the buttons are not pressed well, try to take a screenshot in horizontal orientation – sometimes this helps to avoid false positives.

Where to look for a finished screenshot? By default, all screenshots are saved in the folder:

The internal drive → Pictures → Screenshots

Or through the gallery: open the Photos app → Screenshots album.

2. Screenshot by gesture (3 fingers down)

The screenshot gesture feature appeared in MIUI 10 and has since become one of the most convenient features for Redmi owners, allowing you to take a screenshot in one motion without using physical buttons. Here's how to set it up and use it:

1. Go to Settings → Additional → Special features → Gesture for a screenshot.
2. Activate the swipe switch with three fingers down.
3. Select the swipe direction (by default - down, but you can configure left / right).

Now to take a screenshot:

1. Place three fingers on the screen (no matter where – as long as they do not touch the system navigation buttons).
2. Then, move them down (or in the direction you choose).
3. The shutter sound and animation will confirm the successful screenshot.

🔹 Challenges and solutions:

• 🚫 Make sure the feature is enabled in the settings. On some firmware, it may reset after the update.
• ⚡ Reduce the sensitivity of the gesture in the same settings or turn it off for specific applications (for example, for games).
• 🎮 Conflict with gestures in games? → Annexes → Permits → Special access → Gestures can be added to games in exceptions.

3. button in the notification curtain (quick access)

If the physical buttons are jammed and the gestures are disabled, the Quick Settings Panel will come to the rescue, and this method works on all Redmis with MIUI 9 and later:

1. Swipe down from the top edge of the screen to open the notification curtain.
2. Fully open the panel (swipe down again).
3. Find the Screenshot button (usually hidden under the Still or Edit point).
4. Slip on it – the screenshot will be taken instantly.

⚠️ Note: Some models (e.g. Redmi) 9A With lightweight firmware, the screenshot button may not be in the default curtain:

1. Open the curtain and tap the Edit icon (pencil).
2. Find a screenshot in the list and drag it to the active area.
3. Save the changes.

🔹 Advantages of the method:

• ✅ It works even with faulty power/volume buttons.
• ✅ You can assign a long screenshot (scrolling) to the button - for this, hold it. 1-2 seconds.
• ✅ Faster gestures if your hands are busy (for example, hold your phone with one hand).

Screen unlocked | Notification curtain fully deployed | Screenshot button visible (if not, add in editor) | No active system dialogs-->

4.Voice Assistant (for MIUI 12 and later)

If you need to take a screenshot without using your hands (for example, during cooking or repairs), the voice assistant XiaoAI will come to the rescue. The feature is available on all Redmis with MIUI 12 and above, but requires pre-configuration:

Activation of voice control:

1. Go to Settings. → Voice assistant.
2. Turn on the switch Voice Assistant XiaoAI.
3. Set up voice activation (e.g., the phrase “OK, Google or Hello, Siri – depending on the region).

How to take a screenshot with your voice:

1. Activate the assistant with a voice command (for example, say Hello Siri or press the call button).
2. Say, Take a screenshot or a screenshot.
3. Confirm the action (if required).

🔹 Limitations and nuances:

• 🗣️ It only works on Chinese, global and European firmware MIUI. Custom (e.g., LineageOS) may not be supported.
• 🔇 In noisy rooms, the assistant may not recognize the command – try to speak more clearly or use the call button.
• 🛡️ For security, voice control of screenshots can be disabled in some applications (banking, instant messengers).

5. Scrolling screenshot (long screenshot)

If you want to capture an entire web page, chat in a messenger or a long list, a regular screenshot will not work. MIUI has a Scrolling Screenshot (or Long Screenshot) feature, but it doesn't work in all applications. Here's how to use it:

Method 1: Through the toolbar after the screenshot

1. Take a regular screenshot of any of the above methods.
2. Immediately after the appearance of the screenshot in the lower right corner, tap it.
3. In the editor that opens, select Scroll (an icon with two arrows down).
4. Wait until the system automatically scrolls the screen and makes a long shot.
5. Save the result.

Method 2: For older versions of MIUI (manual bypass)

If you have Redmi on MIUI 11 or older, where there is no built-in scroll, you can use the workaround:

• 📱 Install a third-party app, such as LongShot or Scroll Capture from Google Play.
• 🔧 In the application settings, allow access to Special Features (for automatic scrolling).
• 📜 Start the capture and follow the instructions on the screen.

🔹 Where does/doesn't work scroll:

💡

The scrolling screenshot feature in MIUI only works in applications where content is static (not updated dynamically).

6. Screenshot Problems and Their Solutions

Even on the new Redmi, users are having trouble creating screenshots.-5 The most common mistakes and how to correct them:

Problem 1: Screenshots are not saved

• 📁 Check the free space on the device (need a minimum of 100 MB in internal memory).
• 🔄 Restart your phone – sometimes system processes block saving.
• 🛠️ Reset permissions for the Gallery app: Settings → Annexes → gallery → Permits → Reset.

Problem 2: Buttons don't respond

• 🔋 Check battery power – at levels below 5%, some features are turned off.
• 🔧 Clean the buttons from dirt (especially relevant for Redmi) 9/10 post-extensive).
• 📲 Try alternative methods (guest or curtain notifications).

Problem 3: Screenshots are delayed

• 🖼️ Turn off animation in the developer settings: Settings → The phone. → Version. MIUI (Slip 7 times, then Settings → Additionally. → For developers → Animation. = Off.
• 🗑️ Clear the cache of system applications: Settings → Annexes → Application management → Three points. → Clear everyone's cache.

Problem 4: Three finger gestures are not working

• 🔄 Switch the direction of the swipe in the settings (sometimes it helps to change from "down" to "left / right").
• 📱 Check if the gesture conflicts with other functions (such as the Smart Assistant).
• 🛡️ Update the firmware - in older versions MIUI The gestures may have been unstable.

Problem 5: Screenshots are blurry or dark

• 🌓 Turn off Dark Mode or Reading before creating a screenshot.
• 🔍 Make sure there is no darkened protective film on the screen (relevant for Redmi Note 12 Pro)+ s AMOLED-display).
• 📸 Try to take a screenshot in a horizontal orientation – sometimes it improves quality.

💡

If screenshots are saved in low resolution, check the screen settings: Settings → Display → Screen resolution. Set the maximum value (for example, FHD+ instead of HD+).

7. Hidden MIUI chips for screenshots

Besides the standard features, MIUI offers a few hidden features that few people know about:

1. Quick editing of screenshots

Once you've created the screenshot, tap the thumbnail in the bottom right corner, and you'll see a built-in editor where you can:

• ✂️ Cut the edges.
• 🎨 Add text, drawings or stickers.
• 🔍 Blurring part of the image (useful to hide personal data).
• 📤 Share the edited screenshot directly to messengers.

2. Automatic Text Recognition (OCR)

If the screenshot has text, it can be copied or translated without third-party applications:

1. Open the screenshot in the gallery.
2. Slip the text icon (or Remove text in new versions of MIUI).
3. Select the desired snippet and copy it or translate it through Google Translate.

3. Screenshots in Safe Mode (Safe Mode)

If the phone is getting stuck or is not working properly, but you need to take a screenshot:

1. Press the power button and select Safe Mode.
2. This mode disables all third-party applications, but system functions (including screenshots) work.
3. Take a screenshot in any convenient way.

4. Screenshots with ADB (for advanced)

If the sensor is not working, USB-debugging enabled, you can take a screenshot through the computer:

adb shell screencap -p /sdcard/screen.png

The file will be stored in the phone’s internal memory.

5. Screenshots in games (without lags)

In Game Turbo (Game mode) MIUI) There is a separate button for screenshots:

1. Start the game.
2. Swipe from left to right to open the Game Turbo panel.
3. Slip on the screenshot icon - the picture will be taken without pause in the game.

FAQ: Frequent questions about screenshots on Xiaomi Redmi