How to set location coordinates on Xiaomi Redmi phone: GPS, geolocation and error solving

Modern smartphones Xiaomi Redmi equipped with powerful modules GPS, GLONASS and other positioning systems, but not all users know how to use them correctly, and accurate coordinates are needed not only for navigators like Google Maps or Yandex.Maps, but also for taxis, geotags in social networks, fitness trackers and even banking applications. However, many face problems: the phone does not find satellites, coordinates “jump”, or geolocation is completely disabled.

In this article, you will learn how to enable location coordinates on any Redmi (from budget Redmi). 9A up to the flagship Redmi K60), fine-tune GPS, To eliminate common errors and even save the battery when using geodata actively, we will discuss as standard methods through the menu. MIUI, Hidden functions for experienced users.

We will pay special attention to the unique features of the firmware MIUI — High accuracy mode using Wi-Fi and mobile networks to speed up satellite search, which is not found in pure Android.This allows Xiaomi smartphones to quickly determine the location in urban environments where the signal is not available. GPS often shielded by buildings.

If your Redmi shows incorrect coordinates or has been catching satellites for a long time, at the end of the article you will find a checklist for diagnosing the problem and ways to solve it, including resetting geolocation settings and updating it. AGPS-data.

1. How to enable geolocation on Xiaomi Redmi through settings

Basic method of activating coordinates - using a standard menu MIUI. This method is suitable for all Redmi models, regardless of the firmware version (from the MIUI 12 to MIUI 14 based on Android 13).

Open the Settings app (the gear icon on your desktop) and follow the following steps:

• 📍 Go to the Privacy section → Permits → Geodata (in older versions) MIUI The way may be settings → Additionally. → Confidentiality → geodata).
• 🔄 Include the GeoData slider in the "On" position (it will turn blue).
• ⚙️ Click on Mode and select one of the options: High accuracy - uses GPS, Wi-Fi, mobile networks and sensors (optimum for navigation), charge savings are only Wi-Fi and mobile networks (less accurate, but battery-saving). GPS (The most accurate, but slow and energy-consuming).
• 🔍 Go back and check if my device search option is enabled (required for remote location when your phone is lost).

Once geolocation is activated, the satellite antenna icon will appear in the status bar (top right corner of the screen). If it is not, check if Do Not Disturb or Save Traffic is disabled, which can block access to the screen. GPS.

2. Set up geodata resolution for individual applications

Enabling geolocation at the system level is only half the battle. Many applications (e.g. Google Maps, Yandex.Navigator, Uber or 2GIS) require separate permission to access coordinates, without which they will either not work or show your location with a large margin of error.

To configure permissions for a particular application:

• 📱 Open the Settings. → Annexes → Application management.
• 🔍 Find the app you want (like Google Maps) and tap it.
• 🌍 Select the Permissions item → geodata.
• 🔘 Install one of the options: Allow all the time for navigators and trackers (like Strava); Allow only during use for most applications (saving battery); Disallow - unless the app needs coordinates (like Twitter).

Some applications (such as VTB Bank or SberBank Online) may require permission to access geodata in the background, without which they will not be able to confirm location operations, and to enable it, go back to the application settings and activate the option to Allow Background Activity.

⚠️ Note: If you disable geodata for the Google Play Services system app, it could disrupt all Google services, including Maps and YouTube.

Make sure that geolocation is enabled in the system settings

Check permissions for the application (for example, Yandex.Maps)

Enable High Accuracy Mode

Update the data AGPS (see section 5)

-->

Why Xiaomi Redmi Can't Find Satellites: Typical Problems and Solutions

Even after the geolocation is turned on, the smartphone can catch satellites for a long time or show incorrect coordinates, the reasons usually lie in one of the following factors:

One of the most common reasons is outdated data. AGPS (Assisted GPS). This data helps the smartphone to find satellites faster, but eventually loses relevance, especially after resetting the phone to factory settings or a long shutdown. GPS.

Another possible problem is hardware constraints, like Redmi's budget models like the Redmi. 9A or Redmi 8A) simplified GPS-A module that works worse in urban environments, and then you can only switch to a dual frequency model. GPS (For example, the Redmi Note 11 Pro+).

4. How to improve accuracy GPS Xiaomi Redmi: hidden settings

If standard methods don’t help, you can use hidden settings that don’t appear in the main menu. MIUI. These parameters allow you to fine-tune the work GPS-Module, but require caution - incorrect changes can worsen the situation.

To access hidden settings GPS:

• 📱 Open the Phone app and enter the combination: ##1472365##
• 🔧 After entering, the menu will open. GPS Test (in some models, it may be called the test). LBS Test Mode).
• 📡 Here you'll see: List of satellites found (greens connected, grays available) Signal level (higher the level of the satellite). S/N, Coordinates (longitude/latitude) and accuracy (in meters).
• ⚙️ To reset the cache GPS press Delete AGPS Data (deletes outdated data).
• 🔄 To forcefully update AGPS, Choose Update AGPS (Internet connection required).

You can also test GLONASS (Russian positioning system) and BeiDou (Chinese) in this menu, and then go to the Satellites tab and see how many satellites of each type are found. If Redmi doesn't see any GLONASS satellites, it may be disabled in the firmware (relevant for models sold outside Russia).

Tip: If you use a navigator in your car often, install the app GPS Status & Toolbox from Google Play.It lets you manually control your satellite connection and even calibrate your compass, which improves accuracy in motion.

💡

If you are traveling to another region or country, update the data AGPS This will speed up the search for satellites in a new location.

5. Update AGPS and resetting geolocation settings

If GPS Xiaomi Redmi is unstable, the first thing to update the data AGPS And reset the geolocation settings, which helps in 80 percent of cases where the coordinates are determined with a large error or not updated.

For the AGPS update:

• 📶 Connect to the Internet (preferably via Wi-Fi, as mobile traffic can be blocked by the operator).
• 📍 Open the hidden menu GPS (Combination #1472365##).
• 🔄 Press Update. AGPS Wait until the process is completed (usually 10-30 seconds).
• 🔄 If there is an option to Update GPS Almanac – also update it.

If the update does not help, reset geolocation settings:

1. Go to Settings → System → Resetting settings.
2. Select Reset geodata settings (not to be confused with a full phone reset!).
3. Confirm the action and restart the device.

After restarting, update again. AGPS and check the work GPS in the Google Maps app or GPS If the problem persists, it may be faulty. GPS-module (especially if the phone falls or comes into contact with water).

⚠️ Note: Some Redmi models (such as the Redmi Note 8 Pro) may need to reset the application permissions after resetting the geodata!

💡

Update AGPS Resetting geolocation settings is the first step in any problem with the GPS. These actions do not delete personal data, but may require reconfiguration of permissions for applications.

6. Battery savings when using geolocation

Active use GPS — If you notice that the battery on the Redmi goes down too quickly, but you can not turn off the geolocation (for example, because of working in a taxi), take these tips:

• 🔋 Switch to Charge Saving Mode (in geodata settings) if you don’t need maximum accuracy.
• 📴 Turn off geolocation for unnecessary apps (for example, Instagram or TikTok if you don’t use geotagged apps).
• 🔄 Turn on the Adaptive Battery in the power settings – it limits the background activity of applications, including access to the power supply. GPS.
• 📡 Use offline maps in your navigators (e.g. Google Maps or Yandex.Maps) to reduce traffic and energy consumption for continuous data updates.
• 🔌 If you're in a car, plug your phone into a charger, and many of the navigation devices (like Sygic) automatically go into low-cost mode when powered by a lighter.

For advanced users: in MIUI is a hidden function GPS Power Saving, which reduces the frequency of satellite surveys, to activate it:

1. Enter the code in the phone app: ##846633##
2. Choose. GPS Power Mode and set the Low Power value.

This will reduce accuracy, but will significantly extend battery life.

Verification of work GPS third-party

If you doubt that GPS Your Redmi is running correctly, use specialized testing applications that show detailed information about satellites, signal strength and coordinate accuracy.

Top.-3 check-in GPS:

• 📡 GPS Status & Toolbox — shows the list of satellites, signal level, coordinates and even allows you to calibrate the compass. AGPS.
• 🗺️ GPSTest – open source, detailed statistics for each satellite (including GLONASS and BeiDou).
• 📊 GPS Essentials is for power users, shows signal graphs, allows you to record tracks and analyze accuracy.

How to use it GPS Status & Toolbox:

1. Install the app from Google Play and open it.
2. Press Manage. A-GPS state → Reset (will drop cache) AGPS).
3. Then select Manage. A-GPS state → Download (update data).
4. Go to the Sky tab, and you can see all the satellites you can see here, and the greens are connected, and the grays are available, but not used.
5. Check the Accuracy value. If it's more than 50 meters, there's a signal problem.

If the app shows that no satellites have been found, despite being in open terrain, it may indicate:

• Hardware malfunction GPS-module.
• Problems with firmware (solved by reflashing).
• Blocking the signal with a cover or metal accessories.

8 What to do if GPS Xiaomi Redmi doesn’t work at all.

If none of the above methods worked, and your Redmi still doesn't identify the coordinates, then we'll go to "heavy artillery." Here's a checklist to diagnose and fix the problem:

Check the physical health of the antenna (if there is damage to the body)

Update your firmware to the latest version of MIUI

Reset all settings (not data!) of the phone

Test it. GPS Safe mode (will eliminate conflicts with applications)

Check the work on another SIM-The card (sometimes the operator blocks) AGPS)

-->

If resetting settings and updating firmware didn’t help, it may be a hardware problem. GPS-The module in Redmi is usually soldered into the motherboard, and its replacement requires disassembling the phone:

• 🔧 Fastboot phone (instructions are available on the forum) 4PDA). Sometimes mistakes GPS smack-driven.
• 📡 Check the antenna: if the phone fell, the contact could break off GPS-You can see this when you're disassembling.
• 🔋 Replace the battery: a bloated battery can put pressure on the board and disrupt the module.
• 📱 Test with another. SIM-card: some operators (e.g. Tele2) restrict access to the AGPS.

If you decide to take the phone to the service, check if they have equipment to check. GPS. Some workshops just say "module burned," but the real problem could be the firmware or antenna. GPS-module on Redmi - from 1500 to 3000 rubles (depending on the model).

⚠️ Note: On Redmi models with Mediatek (e.g. Redmi) 9A or Redmi 8A) trouble GPS Often, they are simply re-fashioned through SP Flash Tool. Snapdragon models (such as the Redmi Note 10 Pro) may need to be reset via a flash drive. EDL-regime.

Last tip: if GPS It stopped working after the update. MIUI, Try to roll back on the previous firmware version. Sometimes new builds contain bugs that affect geolocation, XDA Developers or 4PDA).

FAQ: Frequent questions about coordinates on Xiaomi Redmi