Setup of TV channels on Xiaomi TV: from antenna to TV IPTV

Xiaomi TVs (Mi series) TV, Redmi Smart TV, Xiaomi TV (A) offer flexible options for setting up on-air, cable, satellite broadcasting and IPTV. But the menu interface is often a question for users, especially if you've used other brands of TVs before, and in this article, we'll look at all the ways you can add channels, from basic automatic search to manually adjusting satellite settings.

Many people mistakenly believe that it is enough to simply connect an antenna — but in practice, the quality of the signal depends on the right parameters: frequency, symbolic speed, even polarization for satellite dishes (DVB-T2), If you don't have the right settings in the region, half of the channels can go missing. MIUI TV 2023-2026, including solutions to typical problems such as “no signal” or “no channels saved".

Unlike the old “stupid” TVs, Xiaomi smart models allow not only catching the air, but also integrating the air. IPTV-Playlists, sort channels by genre, block unnecessary ones (such as advertising or paid ones), but these features are hidden in non-obvious menu sections. Next are step-by-step guides with pictures (for key steps) and explanation of technical nuances.

1. Preparing the TV for channel search

Before setting up the channels, make sure that the Xiaomi TV is ready to receive the signal, which includes checking connections, updating the firmware, and choosing the right signal source.

First, physically connect the antenna (air, cable or satellite) to the connector. RF IN It's on the back of the TV. IPTV If you use a satellite dish, check that the cable is from the Internet. LNB plugged SAT IN (On some Xiaomi models, it is combined with an antenna input).

Next Update the TV firmware: Go to Settings → On TV. → Update: Up-to-date software fixes channel search errors, especially for regions with non-standard broadcast frequencies. MIUI TV 3.0.12 fixes the problem with the loss of channels after the reboot.

Choose the correct signal source:

• 📡 On-air TV (DVB-T/T2) — for reception through a room or street antenna.
• 📶 Cable TV (DVB-C) — If your provider provides a signal over a coaxial cable.
• 🛰️ Satellite TV (DVB-S/S2) — for plates Tricolor, NTV-Plus, etc.
• 🌐 IPTV — streaming over the Internet (requires a playlist in format.m3u).

2. Automatic channel search (DVB-T2/DVB-C)

This is the easiest way to set up on-air or cable channels, and the algorithm is suitable for most regions of Russia, Ukraine, Kazakhstan and Belarus, where broadcasting is conducted in the standard. DVB-T2.

Steps for Automatic Search:

1. Open the Settings. → Channels → Search engine.
2. Select the signal type: Digital (DVB-T2) cable (DVB-C).
3. Specify a country (e.g. Russia) and a region (e.g. Moscow and the region), which is important because the TV will automatically adjust the multiplex frequencies.
4. Click Scan and wait until it is completed (usually 5-10 minutes).

If no channels are found:

• 🔍 Check the connection of the antenna and cable (the signal indicator should be green in the settings menu).
• 📶 Try manually specifying multiplex frequencies for your region (see Section 3).
• 🔄 Restart the TV and repeat the search.

💡

If the TV finds channels but they don’t show (black screen or artifacts), try changing the Reception Mode in the channel settings to the channel. 256QAM (for DVB-C) or COFDM (for DVB-T2).

Once you've done a successful search, the channels will be sorted automatically. To change the order, go to Settings. → Channels → Channel management and use the Sort function.

Manual channel search: when the machine is not working

Automatic search may not work in remote regions where broadcasting is conducted at non-standard frequencies, or if the provider uses atypical modulation parameters, in which case manual adjustment will help.

Instructions for manual search:

1. Go to Settings → Channels → Manual search.
2. Select the signal type (DVB-T2, DVB-C or DVB-S2).
3. Enter the parameters manually (see the table below for examples).
4. Click Search and wait for the result.

Examples of parameters for manual search (relevant for Russia, 2026):

For satellite TV (DVB-S2) additionally need to be specified:

• 📡 Polarization (vertical V or horizontal H).
• 🛰️ Satellite (e.g. Eutelsat) 36A/36B tricolor).
• 🔢 LNB Type (usually Universal or Unicable).

💡

If manual search fails, try changing the Network setting. ID (Network ID on Auto or manually specify value (e.g, 1 RTRS-1).

4. IPTV setup on Xiaomi TV

IPTV You can watch TV channels over the Internet without an antenna.m3u (It is provided by the provider or you can find free options on the network).

How do I add? IPTV Xiaomi TV:

1. Download the playlist to USB-upload it to the cloud (e.g. Google Drive).
2. Connect the flash drive to the TV or open the file through the File Manager.
3. Go to Settings. → Channels → IPTV and select the downloaded file.
4. Wait for the list of channels to load (it can take up to 5 minutes).

If the channels are not reproduced:

• 🔌 Check the internet speed (for Full) HD You will need at least 15 Mbps).
• 🔄 Update the playlist (links to streams may change).
• 🛠️ Try another player (like Smart). IPTV or SS IPTV from the App Store on TV).

Internet connection (Wi-Fi or cable)

Downloaded current playlist (.m3u)

Playlist corresponds to region (not all channels operate abroad)

Disabled. VPN/Proxies (can block streams)

-->

Important: some providers (for example, MTS or Beeline) block IPTV In this case, you will need to use the official application of the provider or configure VPN Russian IP.

5. Sorting, editing and deleting channels

Once searched, channels are often arranged in a chaotic order. TV There are tools to manage them:

How to sort channels:

1. Open Settings → Channels → Channel Management.
2. Select a channel and hold the button. OK on the remote to drag it to the right place.
3. For grouping by genre, click Categories and assign tags (e.g., "Sport", "News").

How to remove unnecessary channels:

• In the Channel Management menu, select the channel and press the Red button (or Delete).
• For mass removal, use a filter by type (e.g., remove all radio stations).

Additional functions:

• 🔒 Channel locking: install PIN-Access restriction code (in Settings) → Parental control).
• 📌 Features: Add frequently watched channels to a separate list.
• 🔄 Logo updates: If channels don’t have icons, update them through Settings → Channels → Update the logo.

💡

If after sorting channels are reset, reset the cache of the TV application in Settings → Annexes → Application management → Television → Clear the cache.

6. Solving problems with finding and receiving channels

If the Xiaomi TV doesn’t find channels or they’re jammed, check out the following:

Common mistakes and ways to eliminate them:

• 🚫 "No signal": Check the integrity of the antenna cable and connectors. Make sure the antenna is pointing at the tower (for on-air TV). Try another power source for the active antenna (if you're using it).
• 🔄 "Channels disappear after reboot": Update the TV firmware. reset the channel settings to factory (Settings → Channels → Reset).
• 📶 "Weak signal (less than 50%)": Use a signal amplifier. Check if the antenna is shielded by a metal structure (e.g., a balcony grille).

For satellite TV (DVB-S2) check-up:

⚠️ Warning: If the TV is not catching a satellite, make sure: The plate is properly got stuck (use SatFinder or a special customization app). LNB Power is provided (some Xiaomi models require you to enable the option) LNB Power in satellite settings. No interference from neighboring satellites (check DiSEqC switch if multiple plates are used).

7. Features of settings on different Xiaomi models

The interface and channel search capabilities may vary depending on the Xiaomi TV model, with key differences below:

Model comparison:

For models from 2023 to 2026 (e.g. Xiaomi) TV A Pro 55" is available as a channel auto-renewal feature, which automatically adds new channels and removes inactive channels to enable it:

1. Go to Settings. → Channels → Auto-update.
2. Set a schedule (for example, once a week).
3. Activate the option to remove inactive channels.

On older models (e.g. Mi) TV 4S) There may be no support DVB-S2. In this case, an external receiver will be required to view satellite TV (for example, for example, GS U510), plugged HDMI.

8. Alternative ways to watch TV on Xiaomi

If standard channel setup methods are not suitable, consider alternative options:

Ways to view without antenna:

• 📱 Mobile apps: Install Tinkoff TV, Wink or MTS TV from the App Store on your TV. Some apps (such as MEGOGO) offer free TV channels without registering.
• 🖥️ Connecting a PC or laptop: Use HDMI-cable for broadcasting from a computer (for example, via VLC Miracast or Google Cast (if the TV supports wireless transmission).
• 🎮 Configures and media players: Connect Xiaomi Mi Box, NVIDIA Shield or Apple TV access IPTV-It often works better on consoles. EPG (transmission).

It may be necessary to view foreign channels. VPN. Please note that some services (such as Netflix or Netflix) BBC iPlayer blocks access from Russian IP. In this case:

1. Install. VPN-App (e.g. Windscribe or ProtonVPN) to your TV.
2. Select a server in the broadcasting country (for example, UK for British channels).
3. Update geolocation in Google Play Services settings (if used).

💡

Use of the VPN For stable browsing, choose servers with minimal ping (checked through Speedtest).

FAQ: Frequent questions about channel setup