Modern smartphones, such as Xiaomi Redmi Note 10 Pro, are equipped with advanced AMOLED-But many users are used to flashing lights that signal missed calls or messages (LED) In new models, it forces to look for alternative software solutions for visual alerting.
Fortunately, the MIUI shell provides flexible tools to customize the interface, allowing you to turn the screen into an effective event indicator. You do not need to install third-party applications if you set the system parameters correctly. In this article, we will discuss all the available ways to activate light signals, including hidden functions and customization of special features.
Understanding Always On Display and Lighting Effects will help you avoid missing any important notifications.We’ll look at both standard out-of-the-box methods and advanced settings for power users, which will allow you to tailor your device to your personal preferences and usage habits.
Features of the display in the Redmi Note 10 Pro
Unlike the budget models, the Redmi Note 10 Pro lacks the classic LED indicator at the top of the case. Xiaomi engineers have bet on an energy-efficient display that takes on the role of a visual informant. This solution saves battery power, since only a fraction of the pixels light up, not an entire high-power LED.
The system logic of notifications is based on the locking of the screen and the status bar. When the device is in your pocket or lying down the screen, the standard response to events is limited to sound and vibration, which is why activating the function "Lighting effects" or AOD becomes critical for those who are used to navigate by the color of the blink.
⚠️ Attention: Using a constantly burning screen or frequent light animations can lead to accelerated wear of the matrix AMOLED and reducing the time of autonomous work.
To make the indicators work properly, it is necessary that the system correctly recognizes incoming events. Sometimes after updating the MIUI, the settings can be reset, requiring re-activation. It is important to understand the difference between software emulation and hardware, so as not to look for a non-existent LED.
Activation of light effects through settings
The first step to adjust visual signals is to activate the built-in Light Effects feature, which causes the screen to briefly light up a certain color when a call or message arrives, and is located deep in the system menu, so you should be careful when navigating.
To enable the function, go to Settings → Additional settings → Lighting effects. Here you will see the switch that you need to activate. Once turned on, the system will prompt you to select a color for different types of events, which allows you to visually distinguish calls from messengers.
☑️ Adjusting the lighting effects
It's worth noting that some versions of firmware might call this feature "Blink at Notifications." If you don't find a paragraph in a specified place, search by settings by entering the keyword "light" or "notification." The system will tell you the desired section.
Once activated, it's recommended that you do a test, send yourself a test message on WhatsApp or Telegram and see how your smartphone reacts, and the screen should flash the color you choose, even if it's off. LED-indicator.
Why can't the function work?
Always on Display as an Indicator
Technology Always on Display (AOD) It is the most effective substitute for the LED indicator on the AMOLED-It allows you to display the watch, date and icons of applications in sleep mode. For the Redmi Note 10 Pro, this is the main way to visually monitor events without turning on the phone.
You can set up AOD through the Settings menu → Wallpaper and personalization → Always On Display and lock screen. There is a wide range of styles available. For maximum information, choose the style that displays the application icons. In this case, when a letter or call arrives, the corresponding icon will appear on the screen that is turned off.
It is important to set the function’s schedule correctly so that you don’t have to put the battery back to zero by the evening, and the best option is to set a timer, for example, from 8:00 to 23:00, or use a smart schedule mode that takes into account your habits.
| Parameter | Description | Recommendation |
|---|---|---|
| Mode of work | Determines when the screen is on. | Schedule or 10 seconds after touching |
| Style. | Appearance of the widget | With app icons (for notifications) |
| Brightness | Intensity of glow | Auto (for energy saving) |
| Turn. | Image orientation | Insert for convenience |
💡
Always On Display with app icons is a full-fledged LED indicator replacement, providing more information about the type of event.
Remember, AOD requires a stable light sensor to work. If you're using a low-quality protective glass, the sensor may not work properly and the screen won't catch fire in your pocket. Check the cleanliness of the top of the screen.
Indication through status bar and icons
When the phone is unlocked or in standby mode with the screen on, the status bar plays a major role. In MIUI, you can flexibly configure the display of notification icons, which allows you to instantly assess the presence of unread messages.
Go to Settings → Notifications and Control Center → Status bar. You can turn on the app icons here. Unlike the older versions of Android, where there were only dots, here you can see full Viber, SMS or email logos.
For users who care about minimalism, the Notification Points option is available, which is less visible but does not clutter the interface, which depends on your personal preferences and visual acuity, and both options are readable on the Redmi Note 10 Pro's large screens.
- 🔔 Colored dots: Appear next to the app icon on the desktop.
- 📱 Icons in the line: displayed at the top of the screen constantly.
- 👁 Hiding Content: allows you to see the fact of the notification, but hides the text in the curtain.
Also worth paying attention to the settings of a particular application. Some messengers have their own settings of indicators inside their menu. Make sure that the application itself does not prohibit the display of the icon.
Advanced settings of special features
For users with special needs or those who want maximum control, Android offers a section called “Special features” where you can configure a notification flash that makes the camera blink when an incoming call.
This feature is activated along the Settings path → Additional settings → Special features → Flash notifications. This is a great hardware way to attract attention, which works even when the screen is off if the phone is lying up with the camera.
⚠️ Attention: Frequent use of flash notifications may cause the camera module to heat up.
Another hidden possibility is to customize color inversions or high-contrast texts, which can also serve as a visual cue, albeit less convenient in everyday use.
💡
If the standard flash brightness isn’t enough, try removing the protective case from your phone during testing – some dense materials can block the diode’s light.
Troubleshooting and troubleshooting
Often, users are faced with a situation where the settings are turned on, but the indication does not work. In 90% of cases, the problem lies in the aggressive power saving system MIUI. The system kills background processes, considering them unnecessary, and blocks the arrival of notifications until the moment of unlocking.
To fix this, you need to go to the battery settings, find a problem app (like Telegram or Viber) and select a "No Limits" strategy, which will prevent the system from turning off the application in the background.
Also check permissions. The app must be able to "autostart" and work in the background. Without that, the Redmi Note 10 Pro simply won't know about the message until you open the chat yourself.
- 🔋 Battery: Remove background activity restriction.
- 🚀 Auto Start: Allow the application to run with the system.
- 🔒 Lock: Lock the application in memory (lock in the multitasking menu).
If nothing works, try resetting your app settings through the recovery menu or resetting your phone completely, saving the data beforehand.
What if the screen doesn’t go out?
Comparison of indication methods
To sum up, the owner of the Xiaomi Redmi Note 10 Pro has several ways of getting visual signals. Each method has its pros and cons, and the ideal option is a combination of them.
Always On Display with icons is best for office work, because it's informative and doesn't require any action, for noisy places or when the phone is in your bag, flash or sound signals are indispensable, and the light effects of the screen are the middle ground.
And let's not forget the tactile recoil, because adjusting vibrations to different types of contacts can complement visual signals to create a comprehensive alert system. The modern smartphone is a multimedia center, and you need to use all of its features.