Modern wireless headsets from the Xiaomi brand and its sub-brand Redmi are deservedly popular due to their excellent price-performance ratio. However, like any complex electronics, they can sometimes work unstable: the sound is interrupted, the devices can not see each other or there are problems with connecting to a smartphone.
The resetting procedure helps to eliminate software failures, clear memory of temporary errors, and re-initiate the pairing process. This action does not remove music, but completely resets the Bluetooth connection settings inside the headphones themselves. It is important to understand that the algorithms of actions can vary significantly depending on the particular model of your device.
In this article, we will discuss in detail all known ways of rebooting and resetting for different product lines, you will learn how to properly prepare gadgets for the procedure, what combinations of buttons to use and what to do if standard methods do not help restore performance.
Preparation of the device for the discharge procedure
Before you start taking drastic measures, you need to make sure your device is ready to reboot the configuration. The critical parameter here is the battery level. If the batteries are dead, the process can be interrupted halfway, leading to malfunctioning of the headphone microcontroller.
Place both earbuds in the charge case and make sure the lights signal the start of charging, leave them there for at least 15-20 minutes, even if they seem to be fully charged, to stabilize the voltage, as there is a short-term energy surge when reset.
💡
Before starting the procedure, wipe the contacts on the headphones and inside the case with a dry cloth - oxidation can prevent proper charging before resetting.
Also, remove the device from your smartphone’s Bluetooth memory list beforehand, which will prevent automatic reconnection during setup, which may interfere with the reset process.
Make sure there are no other active Bluetooth devices that have been paired with your headphones before.The presence of extraneous signals can confuse the headset when you exit pairing mode.
Universal discharge method for TWS-model
Most modern models, such as Redmi Buds 3 Pro, AirDots or Buds 3 Lite, use a similar algorithm of actions, which is the standard for True Wireless Stereo systems and is suitable for initial diagnosis of problems.
Remove both earbuds from the case. You need to press and hold the touch zones on both devices at the same time. The retention time is usually 5 to 10 seconds until the indicators start flashing a certain color.
☑️ Reset algorithm TWS
When the LEDs flash red or white (depending on the model), release the sensors. Then place the headset back in the charging case, which completes the cycle of cleaning the internal memory.
⚠️ Warning: Don't remove the headphones from the case immediately after reset. 10-15 seconds to fully restart the system inside the closed case.
After these steps are completed, the headset will go into standby mode (pairing), the indicators should start flashing often, signaling readiness for a new connection.
Resetting settings through a button on the charging case
Flagship models, including the Xiaomi Buds 4 or Redmi Buds 4 Pro, often feature a physical control button on the case of the charging case. This control is designed specifically to reset and put the device in pairing mode.
Place both earbuds inside the case and leave the lid open. Find a function button (usually round or oval) on the back or bottom of the case, pressing it activates the hidden control menu.
What does white flashing mean?
Keep the button pressed during 10-15 Watch the LED light on the front of the case, and it should change the pattern of blinking or color, which will confirm a successful reset configuration.
Do not release the button immediately after the first flash.The system requires a long press to confirm the action to prevent accidental reset in the pocket of the bag.
| Model | Action. | Indication of success | Retention time |
|---|---|---|---|
| Redmi Buds 3 Pro | The button on the case | Orange light | 10 seconds. |
| AirDots 3 | Sensors + case | Blink 3 times | 15 seconds. |
| Buds 4 | The button on the case | White light | 2 seconds |
| Earbuds Basic 2 | Sensors. | Red light. | 5-7 seconds |
After a successful display, close the case cover and wait a few seconds. Now your headphones are clean from previous settings and ready to work as new.
Specificity of resetting game and wired models
Owners of the Redmi Gaming Headset or wired liners face different operating conditions, with no batteries or complex menus, so the hardware reset is done differently.
For wired models with microphone and control buttons, a combination of buttons is often used. You need to simultaneously press the on button (if any) and the volume button. Hold them for about 5-7 seconds.
If your model is a game and connects through USB-Adapter, try to disconnect the adapter from the PC, press the mute button on the headband and reconnect the adapter.
⚠️ Attention: For wired models without built-in battery, resetting often means simply breaking the power circuit. 1-2 minute.
Some advanced wired models support software reset via a proprietary application on a PC, in which case you need to find the Reset to Default button in the audio settings section.
Using Xiaomi Earbuds app to reset
Digital twin headphones allow you to control settings via smartphone. the Xiaomi Earbuds or Mi Wear app (for international versions) sometimes contains the option of software reboot.
Open the app and plug in your headphones. Go to the device-specific settings section. Look for a item that could be called Reset, Factory Reset, or Clear Data.
💡
Software reset via the application is safer than manual, since the system itself controls the integrity of the configuration files.
Press the appropriate button and confirm the action. The smartphone will send the command to the headphones, and they will automatically reboot. This method is especially useful if the physical buttons on the device do not respond.
After the process is completed, the app may notify you to reconnect the device. Follow the instructions on your phone screen to complete the setup.
Solution: What to do if the reset does not help
Sometimes even a complete reset doesn't bring the headphones back to life, which can indicate deeper issues like a hardware malfunction or a critical firmware error.
Try leaving the case with the headphones on charge for a few hours, completely ignoring them. Sometimes the deep discharge of lithium polymer batteries takes a long time to "rock" before turning on.
Check if the buttons or sensors are stuck due to contamination, and dirt, earwax, or moisture can create false resistance that prevents sensors from working properly.
⚠️ Warning: If the headphones heat up in a case or make extraneous sounds, immediately stop charging - this is a sign of a battery malfunction.
As a last resort, you can try to freeze the problem: place the headphones (without a case, if it is electronic) in a sealed bag and put them in the refrigerator for 15 minutes. A sharp temperature drop sometimes helps contacts to "grab" but this is a temporary measure.
If nothing helps, it is likely that you need to replace the battery or flash through the programmer, which is only possible in an authorized service center.
💡
Regularly update the firmware of the headphones through the app – this prevents many software failures that require resetting.