How to reset to factory settings on Xiaomi robot vacuum cleaner

Modern cleaning devices, such as the Xiaomi robot vacuum cleaner, are complex gadgets with their own operating system and communication modules. In the process of operation, owners often face the need to reconnect the device to a new Wi-Fi network, change the service region or fix software failures that cannot be corrected by a conventional reboot, which requires a full reset to factory settings, returning the device to its original state.

The reset procedure can vary dramatically depending on the model, whether it is the Mi Robot Vacuum series, Roborock or newer Mijia-branded models. Mistakes can cause the vacuum cleaner to stop responding to commands or lose communication with the server. In this guide, we will take a detailed look at all the nuances so that you can safely and efficiently resuscitate your smart assistant.

In which situations a complete reset of settings is necessary

One of the most common reasons to turn to factory settings is to change the router or change the password from the home Wi-Fi network. Xiaomi robot vacuum cleaners usually do not have a convenient interface to enter new network data directly on the case, so the old communication profile must be removed. Without this, the device will unsuccessfully try to connect to the old access point, ignoring new attempts to pair through the application.

Reset is also required when selling the device or transferring it to another user, storing room maps, cleaning history and linking to the Mi Home account. To allow the new owner to register the vacuum cleaner, the previous binding must be completely removed. Ignoring this step will lead to the "Device is occupied" error when trying to add to the new application.

Sometimes the software can fail, which can be the sensors that are not working properly, or the Planning mode that is getting stuck or the failure to return to base, and in these cases, Hard Reset acts as a radical but effective treatment, clearing the error cache and overwriting the configuration files, allowing the system to start from scratch.

• 🔄 Changing the Internet Service Provider, Router or Password from the Wi-Fi Network Requires Updating Network Settings.
• 🏠 Selling or transferring the device to a new owner necessitates deletion of personal data and cards.
• 🐛 Critical software errors when the vacuum cleaner stops responding to commands or builds incorrect maps.
• 🌐 Changing the region in the Mi Home app, as device binding is rigidly dependent on the selected country.

⚠️ Warning: Before resetting, make sure the battery is charged at least 20-30%. If the device turns off during memory cleaning, it can damage the file system and prevent further operation.

⚠️ Warning: Once reset, all the stored maps of the premises will be permanently deleted. If you have a complex layout with several floors or rooms, the map will have to be rebuilt.

Preparation for the procedure: what you need to know before the start

Before you press the button combinations, you need to properly prepare the robot vacuum cleaner Xiaomi. Make sure that the device is on the charging station and the station is connected to the power grid. During the reset and subsequent adjustment, the vacuum cleaner can actively consume energy, and the loss of communication with the base during the status update can interrupt the process.

You will also need a smartphone with Mi Home or Roborock installed.It is advisable that the phone be connected to a 2.4GHz Wi-Fi network, as most robotic cleaner models do not support the 5GHz standard. IP-address of your router and make sure that the phone is enabled geolocation and Bluetooth.

If you plan to simply reconnect the device to a new network, sometimes it is enough to remove it from the application. Go to the device settings in the application, scroll down and select Delete the device. After that, the vacuum cleaner body often requires you to clamping buttons to put it into pairing mode, which is a partial analogue of reset.

💡

If you change routers, try setting up a new router with the same name first (SSID) And the password that the old one had, in which case the vacuum cleaner will automatically connect without resetting.

Universal way to reset via the Wi-Fi button

On most models, such as the Xiaomi Mi Robot Vacuum 1S, Roborock S5 and their counterparts, the main method of resetting network settings is the use of a Wi-Fi button. It can be separate or combined with a power or local cleaning button. First, you need to open the protective cover on the top of the device, where the indicators are usually located.

Press and hold the Wi-Fi button (or button combination if there is no separate one) for 5-10 seconds. You should hear the voice message "Wi-Fi Reset" or "Reset Wi-Fi", and the network indicator will flash blue or orange. This means that the communication module has switched to standby mode and the old network settings have been erased.

Once the indicator flashes, open the Mi Home app. Click on the plus in the top right corner to add the device. The app automatically needs to find the vacuum cleaner in standby mode. Follow the on-screen instructions by selecting your Wi-Fi network and entering your password. If the automatic search fails, select the model from the list manually.

The combination of buttons for transition to pairing mode:


Separate Wi-Fi button: hold 5 seconds.




Power button + Wi-Fi: hold 5 seconds at the same time.




Home button + Local cleaning button: hold 5 seconds (on some Roborock models).

Reset to factory settings on various Xiaomi series

Different product lines have their own reset features, such as the Mijia 1C or STYTJ01ZHM series often require two buttons to be pressed simultaneously on the top panel, pressing the on and off button (or local clean button) simultaneously and holding them for about 5 seconds before the beep.

The Roborock S6, S7, S8 series are often equipped with touch buttons. The principle remains the same: long-term press (about 5-7 seconds) on the Wi-Fi icon or a combination of buttons before changing the sound signal.

For older models, such as the Xiaomi Vacuum 1 (V1), the procedure may be different: it often requires you to open the top cover and find a small reset button inside, or use a specific sequence of taps. In some cases, a full reset is only possible through an engineering menu or special utilities, but for 95% of users, a Wi-Fi reset is enough.

What to do if the standard reset does not help

There are situations where a simple Wi-Fi reset doesn't solve the problem, such as if the device is getting stuck on the server or the map of the premises is so damaged that it interferes with navigation, in which case you can try a deeper method - cleaning through the application. Go to the robot settings in Mi Home, look for "About device" or "Maps settings" and select "Reset card" or "Clear memory".

If that doesn't work, try forgetting your device in your smartphone's Bluetooth settings. Remove the vacuum cleaner from your Android or iOS paired device list, then remove it from the Mi Home app. Only then do the hardware reset with buttons. Sometimes the conflict occurs at the Bluetooth level of the phone's protocol.

For advanced users, there is an option to reset via ADB (Android Debug Bridge) if the model allows such a connection, but this requires special cables and skills. In most cases, if the hardware reset and reinstallation in the application did not help, the problem may lie in a hardware fault of the Wi-Fi module or control board.

💡

If after all the manipulations the vacuum cleaner is not connected to the network, try to distribute Wi-Fi from a phone (hot spot) with a name and password identical to your home network, this will help diagnose the router problem.

Reconfiguring: a step-by-step algorithm of actions

Once the device is successfully reset, it goes to standby mode. Open the Mi Home app and make sure that the right region is selected in the profile (Profile -> Settings section). If your vacuum cleaner was bought in China, the region should be China, if the global version is your country or Russia.

Press"+" to add a device. The app will suggest scanning. QR-The code on the bottom of the vacuum cleaner, or select a model from a list. Follow the instructions: enter the password from Wi-Fi. Important: the network must be 2.4 GHz. If you have a dual-band router, temporarily disable 5 GHz or divide the network names in the router settings.

Once connected, the vacuum cleaner will suggest updating the firmware. Software updates are critical after reset, as new versions often contain patches for communication modules. Wait until the loading and installation are completed without turning off the vacuum cleaner. Once rebooted, you can re-build the map by running the device for full cleaning.

• 📱 Select the correct region in your Mi Home profile before adding.
• 📡 Use a 2.4 GHz Wi-Fi network to connect.
• 🔄 Immediately after connecting, perform the firmware update.
• 🗺️ Run the "Map Only" mode or complete cleaning to calibrate the sensors.

Frequently Asked Questions (FAQ)