The integration of equipment from different manufacturers often raises questions among users who want maximum convenience. Owners of Xiaomi Mi TVs, who have connected IPTV from the provider Rostelecom, often set the goal of managing the entire multimedia system with one device. Universal remote allows you to control the volume, on and navigation in the menu of the TV without switching between two “pulls” in your hands.
The pairing process is based on the use of an infrared port (IR port) or Bluetooth connection, depending on the model of your remote control. Modern Wink devices and standard RT-Box consoles support a wide code base, which includes popular brands such as Android TV and Xiaomi. Proper configuration requires accurate adherence to the sequence described in the provider's manual.
In this article, we will take a detailed look at all the steps in remote programming, look at possible codes for Xiaomi TVs, and offer solutions for common synchronization errors.
Preparation of equipment for synchronization
Before you start the setup procedure, you need to make sure that all the components of the system are working and ready for operation. First of all, check the power cells in the Rostelecom remote control, as a weak charge can cause the IR emitter to interrupt the signal during the transmission of commands.
The Xiaomi Mi TV should be on and in line of sight of the receiver remote.Make sure there are no foreign objects between the devices that can block the infrared signal, especially if you are using a standard IR remote rather than a Bluetooth version.
⚠️ Note: If your Rostelecom remote has a “Settings” or “Setup” button, make sure it is not stuck and mechanically serviceable, as it is responsible for entering the code programming mode.
It is also recommended to find a list of codes for your TV brand in advance, although modern remotes often use automatic search. Having a second remote (if any) on your TV will make it easier to check results after each stage of setup.
☑️ Ready to set up
Search for manufacturer code for Xiaomi
The basis for setting up a universal remote is the correct digital code that matches the model of your TV. For the Xiaomi brand, Rostelecom databases (and remote manufacturers DRC, Huayu) are usually reserved for a number of specific combinations, which may differ depending on the year of TV production.
The most common codes for Xiaomi TVs include four-digit combinations such as 1176, 0030, 1225 or 2329.However, as the Mi TV lineup is constantly updated, one code may not be suitable for all models, and it will require a search of several options from the list.
| Rostelecom's remote model | Type of connection | Example of Xiaomi code | Input method |
|---|---|---|---|
| Wink (black/white) | Bluetooth/IK | Automatic. | Settings menu |
| RT-Box (old) | Infrared | 1176 | Manual input |
| Huayu / DRC | Infrared | 0030, 2329 | Button combination |
| Universal Code | Infrared | 1225 | Searching the database |
If you use a new model console (for example, for the Wink console), manual code entry may not be required, since the configuration is done through the software menu of the console itself, in which case the system will poll the database itself and suggest choosing a Xiaomi brand from the list.
Why can't codes fit?
Manual setting through digital code entry
The fastest way to activate the control of the TV is to directly enter the combination of numbers. To do this, you need to put the remote by Rostelecom in programming mode, usually this is done with a long (about 3-5 seconds) press of the TV button or the OK + TV combination until the indicator lights up with a constant light.
Once you activate the input mode, use the digital keyboard to enter one of the codes intended for Xiaomi (e.g., 1176). If the code is correct, the indicator on the remote can blink or go out, confirming the acceptance of the command. Immediately check the volume and turn on buttons.
If the TV does not respond, the procedure should be repeated with the following code from the list.
⚠️ Note: When entering the code, watch for timing - if the pause between pressing numbers is too large, the remote may leave the programming mode, and the input will have to start again.
This method is considered the most reliable for older console models, where there is no graphical configuration interface, it allows you to quickly “tether” basic functions without the need for a deep dive into the menu.
Automatic search of the TV code
If manual code selection is not working, or you don't want to waste time ruminating numbers, you can use the automatic search feature, which is especially relevant for remote controls that support automatic database scanning.
To start the procedure, you usually need to press the TV button or a special combination (often described in the instructions for a particular remote model) until the TV turns off. Once the Xiaomi Mi TV screen is out, you need to immediately release the button to fix the code found.
Some of the Rostelecom consoles (particularly the Wink version) offer an automatic setup menu via the console interface, in which case a list of brands where you want to choose Xiaomi will appear on the screen, and the system will select the optimal management protocol itself.
The advantage of automatic mode is to minimize human error, but if the remote database is outdated, this method may not work for the latest TV models released this year.
Configure via the Wink and RT-Box console menu
Owners of modern Wink consoles and updated versions of RT-Box have access to a more advanced method of setting through a graphical interface, which allows not only to program buttons, but also to calibrate the sensitivity of the infrared port.
To start, you need to go to the main console menu by selecting the Settings (cogs) section. Next, you should find the Remote or TV Control. In the list of manufacturers that opens, find and select Xiaomi or Mi TV.
Path to the menu: Settings → Remote → Customization of buttons → Brand Choice → XiaomiThe system will suggest testing: control buttons will appear on the screen, which you should try to influence the TV. If there is no reaction, select the option "Other Code" or "Next Code" and the console will send an alternative signal.
💡
Use the “Check” feature in the Wink remote settings menu to make sure the TV responds to each button separately before saving the settings.
After successfully testing all the features (on, volume, login to the menu), remember to click the Save or Ready button. Only after that the configuration will be recorded in the device memory and stored after turning off.
Solution and troubleshooting
Despite the simplicity of the procedure, users may encounter a number of issues when the Rostelecom remote stops controlling the Xiaomi TV, most often because the code chosen is not fully compatible with the specific version of the Android TV installed on the device.
If the TV is turned on but not volume controlled, perhaps only the basic control profile is activated. Try resetting the remote settings (usually by a combination of OK + C or 1 + 3 depending on the model) and repeating the procedure by selecting another code from the list for Xiaomi.
- 🔴 The indicator flashes 3 times and goes out – the code is not accepted, try another combination of numbers.
- 🟢 The TV reacts chaoticly – perhaps code from another brand (like General or Dexp) is partially compatible but requires reconfiguration.
- 🔵 The remote works only near the TV - replace the batteries or check the IR port for contamination.
It is also worth considering that some features of the Android-based Smart TV may not be supported through the IR port. In such cases, the remote will only manage basic functions (on/off, sound), and navigation through the interface will remain on the native Xiaomi remote.
⚠️ Attention: When the remote is reprogrammed frequently, the Bluetooth connection calibration (if the remote is hybrid) may be lost, in which case it is recommended to re-connect the remote to the console via the Bluetooth menu.
💡
If neither code fits, try the remote’s “training” method by copying signals from Xiaomi’s native remote if your Rostelecom remote supports this feature.
Use HDMI-CEC instead of remote control
An alternative to the complex setup of IR codes is HDMI-CEC, which allows you to control the TV directly from the Rostelecom console without programming code. If your Xiaomi Mi TV and console support this standard, the console will automatically control the TV.
To activate this feature on Xiaomi TV, you need to go to Settings → General → External Devices (or HDMI Control) and enable HDMI control. On the Rostelecom console, this feature is usually active by default in the device settings section.
The advantage of the CEC method is full integration: the console will turn on / off the TV, adjust the volume and switch signal sources without having to “target” the IR TV receiver. This is especially convenient if the Rostelecom remote is running on Bluetooth.
HDMI-CEC restrictions
If the remote stopped responding after the CEC was turned on, try restarting both devices by disconnecting them from the network for 10-15 seconds.