How to prescribe the remote to the TV Xiaomi: 3 working methods + error solving

Connecting the remote from Rostelecom to the Xiaomi TV is a challenge that interactive TV users face after buying a new Smart TV or replacing equipment. Although both devices work on the infrared control (IR) protocol, their compatibility is not always obvious. In this article, we will discuss three proven synchronization methods, current codes for popular Xiaomi Mi TV models, as well as typical errors and ways to fix them.

It is important to understand that the Rostelecom remote was originally designed to control the set-top box, not the TV itself. TV 4S, Mi TV Q1, Redmi Smart TV) Support universal IR-codes that allow you to "tether" the remote to the TV for basic functions (on, volume control, channel switching) if your remote is equipped with a button TV or STB/TV — higher chances of success.

Before you start setting up, make sure that:

• 🔋 The remote control Rostelecom is serviceable (check the batteries and performance on the console).
• 📺 Xiaomi TV supports the IR-management (all models except Xiaomi) TV Stick and some OLED-variant).
• 📡 There are no barriers between the remote and TV (maximum distance – 5-7 meters).

1. Method: Automatic setting through the remote menu

The easiest method is to use the built-in automatic code search feature, which is suitable for most Xiaomi models and does not require knowledge of exact digital combinations.

Instructions:

1. Turn on the Xiaomi TV and point the remote to it Rostelecom.
2. Press the TV (or STB/TV) and OK buttons for 3-5 seconds at the same time until the indicator flashes twice.
3. Enter 991, which will activate the automatic search mode.
4. Press CH+ (or VOL+) and hold it until the TV turns off, which means that the working code has been found.
5. Confirm the save by pressing OK.

If the TV doesn’t respond for 10-15 seconds, repeat the steps or move to manually entering the code (Section 2.Caution: Some Xiaomi models (e.g. Mi TV A2 43) may ignore universal codes – in which case an alternative method will be required.

Make sure the remote is in TV mode (the indicator is on green)

Record a model of the TV (located on the sticker at the back)

Prepare spare batteries for the remote

Disable others IR-devices in the room (air conditioning, music center)

-->

2. Method: Manual code entry for Xiaomi

If the automatic search didn’t work, try entering the code manually. Below is a table of current combinations for the popular Xiaomi series:

How to enter the code:

1. Transfer the remote to TV mode (click TV + OK, wait for the double blink).
2. Enter the first code from the table (e.g., 0178 for the Mi TV 4S).
3. Point the remote to the TV and press Power. If the TV turns off, the code fits.
4. Save the settings with the OK button.

⚠️ Note: If no code is working, check if it is blocking. IR-signal a protective film on the remote or TV, also make sure that the settings Xiaomi has enabled mode IR-receiver (Settings) → The device → DU remote).

3. Method: Set up via Mi Remote app (for smartphones)

If Rostelecom’s physical remote refuses to work with Xiaomi, you can use the smartphone as an intermediary, and the official Mi Remote app (available for Android and iOS) will do this.

Step-by-step:

1. Download Mi Remote from Google Play or App Store.
2. Connect your smartphone and TV to the same Wi-Fi network.
3. Launch the application, select Add Device → TV → Rostelecom.
4. Follow the instructions on the screen for synchronization.
5. After connecting, use the virtual remote in the TV control app.

The advantage of this method is the ability to configure macros (for example, simultaneously turning on the TV and switching the console to the desired channel). However, it requires a stable Internet connection and a compatible Xiaomi model (the full list of supported devices is in the official documentation).

💡

If the Mi Remote app doesn’t find the TV, try manually adding it as “Universal”. IR-TV" and enter the code from section 2 of this article.

4. Solving common problems

Even after successful configuration, Rostelecom's remotes may not work properly, and consider typical scenarios and ways to eliminate them:

• 🔄 Remote controls only the console, not the TV: Make sure you switch mode with the STB on TV (button at the top of the remote. TV/STB No – your remote model does not support TV control.
• 🔊 No volume control: In Xiaomi settings, turn off the option HDMI CEC (Settings → Sound. → Management HDMI), because it may be in conflict with IR-team.
• 📶 Signal is not stable (only working close range): Check IR-a receiver on the TV, which should be clean and not closed with decorative panels.
• ⚡ Remote stopped working after firmware update: Reset remote settings to factory (clip Mute) + OK 10 seconds) and repeat the settings.

A critical feature for owners of Xiaomi Mi TV P1: This model uses a hybrid. IR/RF-remote, and to control it will require a special adapter Rostelecom RT-BR104, It's a signal converter. It's impossible to synchronize without it.

5. Alternative management options

If none of these methods worked, consider alternatives:

• 🎮 Gaming controllers: Some models (e.g. Xiaomi Game Controller) support control of the TV via Bluetooth. → Devices → Bluetooth.
• 📱 Voice Assistants: Activate Alice or Google Assistant and connect them to your TV via Settings → Voice control.
• 🖱️ Mouse/keyboard by mouse USB: Connect the wired devices to the port USB on the TV – they will allow you to navigate the menu without a remote.

For users who use a Xiaomi TV exclusively with the prefix Rostelecom, the best solution is to buy a universal remote (for example, Xiaomi Mi TV Remote or BroadLink RM4 Pro), these devices support simultaneous control of both TV and console, and also allow you to create custom scenarios.

💡

If your Xiaomi TV does not respond to the remote by Rostelecom, but works properly with the original remote, the problem lies in incompatibility. IR-In this case, the only working solutions are: using a smartphone with Mi Remote or buying a universal remote.

6. Frequent Questions (FAQ)