How to tie the remote Xiaomi TV to the TV: all ways and solutions to problems

Buying a new Xiaomi TV or buying an additional remote control (DU) often comes with the need to synchronize them. Even if the remote was bundled with the TV, resetting or replacing batteries may require re-binding. In this article, we will discuss all the current ways to connect the remote control to the TV, including the standard procedure, alternative methods and solutions to typical errors.

Xiaomi remotes have a feature that supports several communication protocols: classic infrared (for older models) and modern Bluetooth (for new smart TVs on Android TV or Google TV). The binding algorithm depends on the type of connection, so it is important to determine in advance which protocol your remote is using. If you are not sure about the model, check the markings on the back of the remote or in the documentation for the TV.

In the article you will find:

• 🔍 Step-by-step instructions for Bluetooth and IR remotes
• 📱 How to link with the mobile application Mi Remote
• ⚙️ Solving synchronization problems (the remote does not find TV, the indicator flashes, etc.)
• 📊 Compatibility table of remotes and models of Xiaomi TVs
• ⚠️ Warnings about typical errors when setting up

1. How to determine the type of remote: Bluetooth or IR

Before you start binding, you need to figure out which communication protocol your remote supports, which is critical, since the synchronization algorithms for Bluetooth and infrared (IR) connections are fundamentally different.

Here's how to recognize the type of remote:

• 🔦 IR: It has a transparent plastic eye at the top (IR emitter) and only works in direct view of the TV (does not pass through walls). TV 3/4, Mi Box S.
• 📶 Bluetooth remote: No visible IR emitter, case completely closed. Supports up to a distance 10 Typical models: remotes for Xiaomi TV A2/A Pro, Mi TV Q1/Q2, Google TV-version.

If you can’t visually determine the type, check the reaction of the TV:

1. Point the remote to the TV and press any button.
2. If the signal reception indicator appears on the screen (usually in the upper right corner) it is Bluetooth.
3. If there is no reaction, but the remote works with direct guidance - this is IR.

2. Linking Bluetooth remote to Xiaomi TV

Modern Xiaomi TVs (starting with the Mi TV 5 series and later) use Bluetooth remotes that require pre-synchronization. the binding process takes no more than 2 minutes, but may vary depending on the firmware version.

Standard algorithm:

1. Turn on the TV and wait for the system to load.
2. Make sure that the remote has batteries installed (if it’s a new purchase, they can be bundled in a separate package).
3. Press and hold the Menu + OK (or Home + Back for some models) buttons for 5 seconds until the indicator on the remote starts flashing.
4. The TV will show a notification saying, "New remote found. Connect?" and select "Yes."
5. Wait for the synchronization to be completed (the indicator on the remote will stop flashing).

If the TV doesn’t respond to button retention, try an alternative way through the menu:

1. Go to Settings → Devices → Bluetooth.
2. Activate device search.
3. Press and hold Home + Volume Up on the remote until the flashing indicator appears.
4. In the list of found devices, select "Mi Remote Controller" (or similar name).

Put the batteries in the remote |

Turn on the TV and wait for download |

Check the distance (no more than 1 m between the remote and TV) |

Make sure there are no other Bluetooth devices nearby (may cause interference)-->

3. IR remote synchronization with Xiaomi TV

Infrared remotes don't require complex binding, because they operate on a point-to-point basis, sending a signal directly to the TV's IR receiver, but in some cases (for example, after resetting), the remote may need to be reprogrammed.

Instructions for IR panels:

1. Make sure that the remote has working batteries (preferably new).
2. Point the remote to the IR receiver of the TV (usually located at the bottom of the screen).
3. Press and hold the Menu + Volume Down buttons for 10 seconds. The indicator on the remote should catch fire and go out.
4. Press any button (e.g. OK) to check the connection. If the TV reacts, the link is successful.

If the remote is not working, try resetting its settings:

1. Remove the batteries from the remote for 30 seconds.
2. Put the batteries back in.
3. Hold the Power + Volume Up for 15 seconds until the indicator blinks 3 times.
4. Repeat the binding procedure.

4. Remote tethering via Mi Remote app

If standard methods don’t work, you can use the official Mi Remote app (available for Android and iOS), which allows you to not only control your TV from your smartphone, but also synchronize your physical remotes.

Algorithm of action:

1. Download and install the Mi Remote app from Google Play or the App Store.
2. Open the app and select the category "TV".
3. In the list of brands, look for “Xiaomi” and select your TV model (or “Universal” if the model is not listed).
4. Follow the instructions on the screen to check the connection.
5. After successfully syncing the app with your TV, try re-associating the physical remote (see Section 2 or 3).

Note: Mi Remote uses a smartphone IR transmitter (if any) or Wi-Fi/Bluetooth to communicate with TV. Make sure the phone and TV are connected to the same network.

💡

If your smartphone doesn’t have an IR transmitter but supports Bluetooth, you can use it as a temporary remote to set up the main one. In Mi Remote, select the option “Bluetooth Remote”.

5. Compatibility table of Xiaomi remotes and TVs

Not all Xiaomi remotes are universal – some models only work with certain sets of TVs. Below is a compatibility table for popular devices:

If your model is not in the table, check compatibility on the official Xiaomi website or in the documentation for the device. Universal remotes (for example, Xiaomi Mi Universal Remote) may require additional customization through the application.

6. Solving remote tethering problems

Even if you follow the instructions correctly, you can get errors, and let's look at the typical scenarios and how to fix them:

Problem 1: The remote is not detected by the TV when Bluetooth is attached.

• 🔋 Check the battery charge (even new ones can be discharged).
• 📱 Make sure there are no other active Bluetooth devices (earphones, smartphones) nearby).
• 🔄 Reboot the TV: Settings → The device → Reboot.
• 📦 If the remote is new, check the integrity of the package - it may be defective.

Problem 2: The IR remote only works from close range.

• 🔦 Wipe the IR emitter on the remote and the receiver on TV with an alcohol napkin.
• 💡 Remove the bright light sources (lamps, sun) in front of the receiver.
• 🔋 Replace batteries with alkaline batteries (they last longer).

Problem 3: The remote is tethered, but the buttons are not working properly.

• ⚙️ Reset the remote settings (see Section 3).
• 📋 Check the compatibility of the remote and TV model (see the table in section 5).
• 🔄 Update the TV firmware: Settings → On TV. → Updating the system.

💡

If the remote is still out of order after all the manipulations, try connecting it to another device (such as the Mi Box).

⚠️ Note: Some universal remotes (such as those from air conditioners or other brands) may conflict with the Xiaomi protocol. If you use such a remote, disable it before linking the original one.

7. Alternative ways to control Xiaomi TV without remote control

If the remote is temporarily impossible, you can control the TV using alternative methods:

• 📱 Mobile application: Mi Remote (official, with IR support)/Bluetooth). Google TV (Android-based TV 10+).
• 🖱️ USB-Mouse/keyboard: Connect via port USB Bluetooth.
• 🎮 Modern Xiaomi TVs support the connection of Xbox or PlayStation controllers.
• 🗣️ Voice control: Activate Google Assistant or Aleo (for Chinese versions).

To manage through Google TV:

1. Make sure that your TV and smartphone are connected to the same Wi-Fi network.
2. Open the Google TV app on your phone.
3. Select your TV from the list of devices.
4. Use the virtual remote in the application.

If your TV is disabled Bluetooth or Wi-Fi, the only way to control without a remote is to connect. USB-This is relevant for diagnosing malfunctions or resetting settings.

8. Frequently Asked Questions (FAQ)

If your question isn’t covered in the article, check the official documentation for your TV model or contact Xiaomi through the Mi Community app.