Related: Rostelecom Remote Linked to Xiaomi TV: 3 Proven Ways

Synchronizing the remote from Rostelecom with a Xiaomi TV is a challenge that many interactive TV subscribers face. Despite the fact that the equipment manufacturers are different, the right configuration allows you to control the console and basic functions of the TV from one remote. In this article, we will analyze all the current methods of binding, including manual code entry, automatic synchronization and alternative solutions for Mi TV 4/5, Redmi Smart TV and others.

The main challenge is that Rostelecom’s remotes are designed to work with operator consoles, not directly with TVs. However, thanks to universal infrared control (IR) protocols, you can adjust compatibility. It is important to consider that the functionality will be limited: from the Rostelecom remote you will be able to switch channels, adjust volume and turn on / off TV, but access to the Xiaomi Smart menu or the Google Assistant will only remain through the original remote.

If you use a Rostelecom console (for example, SML-282 or SML-482), then you do not need to bind the remote to the TV - just synchronize the console with the console, and connect the console to the TV via HDMI. But if you want to control the Xiaomi TV directly - read on.

1.Preparation: What will be needed to tie

Before you start setting up, make sure you have:

• 📺 Xiaomi TV (any model that supports the IR-Confirmed compatibility with the series: Mi TV 4S/4A/5, Redmi Smart TV X, Mi TV Q1/Q2.
• 🎛 Rostelecom remote control (usually black with operator logo: RCU-007, RCU-010, RCU-6140.
• 🔋 Batteries in the remote (replace if the indicator does not burn when you press the buttons).
• 📱 Smartphone with camera (to check the performance) IR-remoter).

Also check that the Xiaomi TV is on and on standby (the indicator on the panel is lit red or white).If the TV is completely off, the remote will not be able to send a sync signal.

💡

To check if it works IR-the transmitter on the remote Rostelecom, open the camera of the smartphone, point the remote to the lens and press any button. If the transmitter is correct, the screen of the smartphone will see the flickering of the infrared signal (like white flashes).

It is important that your Xiaomi TV does not support IR-management (e.g. some models of the Mi) TV Stick or Mi Box, Rostelecom will not be able to bind the remote, in which case use the original remote or the Mi Remote app for your smartphone.

Method 1: Automatic synchronization (for most models)

This method works for Rostelecom remotes with auto-search code. Instructions are suitable for Xiaomi TVs of 2018 and later.

1. Turn on the Xiaomi TV and wait for the main screen to load.
2. On the Rostelecom remote, simultaneously press the TV (or STB) and OK buttons for 3-5 seconds until the indicator flashes twice.
3. Point the remote to the TV (distance - no more than 1 meter) and press the PWR button (on / off).
4. If the TV is turned off, the synchronization was successful. If not, repeat the pressing of the PWR up to 10 times at intervals of 1-2 seconds.
5. After successfully shutting down, press OK to save settings.

If the TV doesn’t respond after 10 taps, go to manually enter the code.

💡

Auto-search code is the fastest way, but it doesn't work with all remote models. If the indicator on the remote doesn't blink when holding the buttons, your version doesn't support this feature.

3. Method 2: Manual code entry for Xiaomi TV

If automatic synchronization doesn’t work, try entering the TV code manually. Below are the current codes for different Xiaomi series:

Instructions for entering the code:

1. Turn on the TV and point the Rostelecom remote at it.
2. Press the TV (or SET) button for 5 seconds until the indicator blinks twice.
3. Enter a 4-digit code from a table (e.g., 0178). After each digit, the indicator should flash once.
4. After entering the last digit, press OK to confirm.
5. Check the work by pressing PWR – the TV should turn off.

If none of the code fits, try generic combinations like 0000, 1111, or 9999, which sometimes work for custom firmware.

Method 3: Configure via Mi Remote (alternative)

If physical synchronization fails, you can use Xiaomi’s remote app to control your TV over Wi-Fi or Bluetooth, which is true for models that support Mi Home or Google TV.

Instructions:

1. Download Mi Remote (or Mi Home) from Google Play or the App Store.
2. Connect your TV and smartphone to the same Wi-Fi network.
3. In the app, select Add Device → Television → Xiaomi.
4. Follow the instructions on the screen to pair (entry may be required) PIN-TV-code).
5. After connecting to the application menu, a virtual remote with control buttons will appear.

The advantage of this method is access to all the features of Xiaomi TV, including Smart menu and Google Assistant.

5. Common Problems and Their Solutions

Even after a successful link, there can be failures, and let's look at typical situations and how to fix them.

• 🔴 Remote unresponsive: Check the batteries (replace them with new ones, even if the old ones "seem to work"). Make sure there are no obstacles between the remote and the TV (glass, furniture) Reboot the TV (pull the power cord out for 30 seconds).
• 🔄 The buttons are not working properly (for example, VOL+ switches channels: Reset the remote settings (click on) TV + MUTE Repeat the binding with another code from the table. If the problem persists, use the original Xiaomi remote to adjust the volume.
• 📶 The synchronization breaks down when the TV is turned off: This is normal behavior for some models. You have to repeat the binding after each turn on. HDMI-CEC (Turn on the TV settings option Management HDMI).

Batteries tested (replaced with new ones)

There are no physical obstacles between the remote and the TV

The remote is aimed at IR-receiver (usually at the bottom of the screen)

The TV is on (the indicator is on)

We tried to reset the remote settings.-->

Critical feature: Rostelecom’s new consoles (2023-2026) may use an updated RC6 protocol that is incompatible with older Xiaomi TVs (until 2019), in which case the only solution is to order the original Xiaomi remote or use the app.

6. Additional settings for convenience

After successful binding of the remote, you can optimize the control:

• 🎚 Customization of buttons: On some remotes Rostelecom buttons VOL+/VOL- The default volume control is set-top boxes, not the TV. To reassign them: Press them down. TV + MUTE before the indicator flashes twice. 9999. Press. VOL+, later TV. Repeat for VOL-. Save the settings with the button OK.

Use of HDMI-CEC:

If the TV and the console Rostelecom connected via HDMI, enable HDMI-CEC in the settings of the TV (Settings → HDMI → HDMI → HDMI Management). This will allow you to control the console from the Xiaomi remote and vice versa.

Voice control:

If your remote supports voice input (button with microphone), it can be linked to Google Assistant on Xiaomi TV.

1. Activate Google Assistant in your TV settings.
2. Press the microphone button on the remote and say a command (for example, "Enable Channel One").

Note: If you decide to buy a new remote, make sure it supports NEC or RC5 protocol, which is what Xiaomi TVs use.

FAQ: Frequent questions about the remote