How to connect the remote to the TV Xiaomi Mi: all the ways and codes

Connecting the remote from Rostelecom to the Xiaomi Mi TV is a challenge that many users face after installing an interactive TV or buying a new device. Although both devices support standard control protocols, their synchronization is not always smooth. In this article, we will discuss all the current methods of binding, including manual code entry, automatic configuration and solving typical errors.

Xiaomi TVs (Mi TV 4/4A/4S/5 and later) feature PatchWall’s own firmware, which sometimes conflicts with universal remotes. And Rostelecom’s remotes (STB-100/200/300 models) often require additional customization to work with third devices. We tested all methods on current versions of the software and collected checklists for quick synchronization.

What remotes Rostelecom compatible with Xiaomi Mi

Not all remotes from Rostelecom can control Xiaomi TVs. Compatibility depends on the console model and the remote version.

• 🔹 Remote consoles STB-100 and STB-200 — Support most Xiaomi TVs through codes or automatic setup. TV switching to TV control mode.
• 🔹 Remotes STB-300 and newer – equipped with an extended code base, but may require updating the firmware console to work with Mi TV.

To find out the model of your remote, look at the sticker on the back or in the documentation for the console. If the remote is released before 2019, the probability of successful binding to Xiaomi is lower - an alternative method of control (for example, through HDMI-CEC) will be required.

Method 1: Automatic setting of the remote

The simplest method is automatic code search, which works if your remote control is supported by Auto Search.

1. Turn on the Xiaomi Mi TV and point the remote to it Rostelecom.
2. Press the TV and OK buttons on the remote at the same time until the indicator flashes twice (usually 3-5 seconds).
3. Press the Power button and hold it until the TV turns off. This can take up to 30 seconds.
4. After turning off the TV, release the Power – the remote will save the code.

If the TV doesn’t respond, repeat the process or go to manually enter the code. Importantly, some Xiaomi Mi TV 5 models block third-party remote control for security reasons, in which case you need to disable the option to block the IR port in the settings (Settings → Device → Control Lock).

💡

If the automatic search didn't work, try first removing the batteries from the remote for 10 seconds, and then repeat the process.

Method 2: Manual code entry for Xiaomi Mi

If the automatic setup didn’t work, use manual code entry. Below is a table of current codes for Xiaomi TVs (Mi TV 4/4A/4S/5 series):

Instructions for entering the code:

1. Turn on the Xiaomi TV.
2. On the Rostelecom remote, press TV + OK until the indicator flashes twice.
3. Enter a 4-digit code from a table (e.g., 0178 for Mi TV 4A).

If none of the code worked, try an alternative method: type in 9999, and it will trigger an advanced search for compatible protocols.

Make sure the batteries in the remote are fresh.

Point the remote directly to the IR receiver of the TV (usually at the bottom right)

Disable other IR devices (air conditioners, music centers) to avoid interference

Write down codes you’ve tried so you don’t have to repeat yourself.-->

Method 3: Control via HDMI-CEC

If IR synchronization fails, use HDMI-CEC, which allows you to control your TV via Rostelecom, a method that works even if the remote is not directly tied to the Xiaomi Mi.

Instructions:

1. On the console Rostelecom activate the option Control TV (usually in the Settings menu → System).

After setting up, you will be able to:

• 📺 Turn on/off the TV with the Power button on the console console.
• 🔊 Adjust the volume with the buttons +/–.
• 🔄 Switch signal sources (HDMI, AV) source-button.

Limitation: It is not possible to manage Smart functions (such as launching Netflix or YouTube) through HDMI-CEC – only basic commands.

Typical problem solving

If the remote is not synchronized with Xiaomi Mi, check the following points:

⚠️ Attention: Xiaomi Mi TVs TV 5 Pro and Mi TV Q1 They block third-party IR remotes by default. To unlock control, go to Settings. → The device → Control lockdown → Shut down.

• 🔋 Discharged batteries - even if the indicator on the remote is on, the voltage may not be enough to transmit the signal.
• 📡 Interference from other devices – IR signals from air conditioners or audio systems may conflict.
• 🔄 Reset remote - press and hold TV + Mute for 10 seconds to reset settings.
• 📺 Incompatible TV firmware – upgrade Xiaomi Mi to the latest version (Settings) → On TV. → Updating the system).

If the remote controls the TV, but not all buttons work (for example, do not switch channels), check the compliance of functions:

• The CH+/CH button on the Rostelecom remote may not work with Xiaomi, as the TV does not have a built-in TV tuner. Use the Source buttons to switch inputs.
• The 1-9 buttons (digits) are often inactive – they are designed to control the console, not the TV.

💡

If the remote stopped working after a few days after successfully binding, repeat the synchronization process. Xiaomi Mi sometimes resets the list of allowed IR devices after the update.

Alternative management practices

If the binding of the remote by Rostelecom has not succeeded, consider alternative options:

• 📱 Mi Remote app – the official application from Xiaomi for controlling the TV from the smartphone (available for Android and iOS) supports all functions, including voice search.

For use with Mi Remote:

1. Download the app from Google Play or the App Store.
2. Connect your phone and TV to the same Wi-Fi network.
3. In the app, select Add Device → Television → Xiaomi.
4. Follow the instructions on the screen for synchronization.

Advantage: Mi Remote allows you to control not only the TV, but also the console Rostelecom (if it is connected by HDMI-CEC).

Update the firmware for better compatibility

If your Xiaomi Mi TV is released before 2020, its firmware may not support modern IR control protocols. Software updates often solve synchronization problems.

How to update firmware:

1. Go to Settings → About TV → System Update.
2. Click Check for updates.
3. If a new version is available, confirm installation. Do not turn off the TV during the process (it will take 5-15 minutes).

For the prefix Rostelecom:

1. Go to Menu → Settings → Update the software.
2. Choose Update now.
3. After the update, restart the console and repeat the binding of the remote.

⚠️ Attention: On the TVs Xiaomi Mi TV 4A (2018 models) after upgrading to PatchWall 3.0, you may need to reset your IR port settings. → The device → Resetting IR settings.

FAQ: Frequent questions