How to connect the remote from MTS to the Xiaomi TV: all ways + error solving

Linking the MTS TV remote to a Xiaomi TV is a challenge that users who switch to a Mi TV or Redmi Smart TV face after using an operator’s consoles. Although MTS remotes are originally designed to work with their own consoles, they can be adapted to control Xiaomi TVs via an infrared port (IR) or Bluetooth (depending on the remote model).

It is important to note that not all MTS remotes are compatible with Xiaomi out of the box. IR-Transmitter (infrared) usually work only with consoles, and new ones - with Bluetooth support LE We tested the instructions on Xiaomi Mi. TV 4S, Redmi Smart TV X55 and other popular models, so you will get proven solutions, not theoretical recommendations.

If you've tried to tie a remote before, but it didn't work, don't rush to buy a new one. 80 percent of the time, the problem is solved by resetting the remote or choosing the right manufacturer code for Xiaomi. And for Mi TV Stick or Mi Box owners, we've separately described how to reassign buttons to control both the console and the TV at the same time.

1. Compatibility check: which MTS remote is suitable for Xiaomi?

Before you try to tie the remote, make sure your model supports Xiaomi TVs. All MTS remotes are divided into three types:

• 📺 Old ones. IR-remotes (infrared, without Bluetooth) – compatible only with MTS TV consoles. For Xiaomi, they can only be used through training (copying signals from the native remote control).
• 🔵 Bluetooth remotes (post-2020 models) – support direct connection to Bluetooth 4.2 TVs+. Usually have the words "Smart" or "Universal" on the case.
• 🔄 Hybrid remotes (IR + Bluetooth is the most versatile. You can connect it by air or through an infrared port.

To determine the type of your remote:

1. Turn the remote and find a model (e.g., RCU-6402, MTSBT-01).
2. Check for Bluetooth in the specifications on the MTS website or in the instructions.
3. If there is an OK button on the remote with a flashing blue LED, this is a sure sign of a Bluetooth model.

Xiaomi TVs only support Bluetooth remotes directly. IR-Remotes will require training (see section 4) or purchase IR-blaster (e.g. BroadLink) RM4 Pro).

2. Connection of Bluetooth-mts remote to Xiaomi TV: step-by-step instructions

If your remote supports Bluetooth, follow this instruction. We tested it on Xiaomi Mi TV Q1E and Redmi Smart TV A55, but it will work for all Bluetooth 4.2+ models (released after 2019).

Next, follow the steps:

1. On the TV, go to Settings → Devices → Bluetooth.
2. Click Add Device and select Remote (or Other Device).
3. On the MTS remote, press the OK and Volume Up buttons simultaneously for 5-7 seconds until the blue indicator flashes.
4. The name of the remote will appear on the list of available devices on the TV (for example, MTSBT-01 or RCU-6402).
5. Confirm pairing on the TV (you may need to enter the code 0000 or 1234).

After successful connection, check the buttons:

• 🔼 Volume +/– — volume-control.
• 📺 Power - Turning on/off the TV.
• 🔍 Search – Opening a search (some models do not work).

💡

If the buttons are not working properly (for example, Volume switches channels), try resetting the remote to factory settings: press Mute + Power for 10 seconds.

Manual programming IR-MTS remote for Xiaomi (via codes)

If your remote is only infrared (without Bluetooth), it can be programmed to work with Xiaomi through the manufacturer's codes.

1. Turn on the TV and point the MTS remote to it IR-receiver (usually located on the right or bottom of the screen).
2. Press the TV and OK buttons simultaneously on the MTS remote until the red LED lights up (about 3 seconds).
3. Enter the 4-digit code for Xiaomi (see table below) using digital buttons. After entering the last digit, the LED should go out.
4. Check the Power and Volume buttons, and if they don't work, repeat the steps with a different code.

If no code fits, try automatic search:

1. Press TV + OK before the LED flashes.
2. Press 9-9-1 (Auto Search Code for Xiaomi).
3. Wait until the remote goes through all available combinations (up to 2 minutes).
4. Once the TV is turned off, press OK to save the code.

💡

If the automatic search didn’t work, try manually slicing codes from the table starting with 0171 and 0195 – they’re the most versatile for Xiaomi.

4. training of the MTS IR-cooled panel from the native Xiaomi remote (copying signals)

If you don't use the code, you can copy the signals from the original Xiaomi remote to the MTS remote. IR-remote control, but requires a native remote from the TV.

Instructions:

1. Take both remotes: the original from Xiaomi and the MTS remote.
2. On the MTS remote, press TV + Mute until the red LED flashes (training mode).
3. Direct the remotes "face to face" at a distance of 2-3 cm.
4. Press the button you want to copy (for example, Power).
5. Wait until the LED on the MTS remote stops flashing (usually 1-2 seconds).
6. Repeat steps 4-5 for all the buttons you need (Volume, Input, Home, etc.).
7. To exit the training mode, press TV on the MTS remote.

Important nuances:

• ⚡ Copying works only for the purpose of IR-Buttons that use Bluetooth (e.g. Google Assistant) cannot be copied.
• 🔄 If the signal is not copied, check the batteries in both remotes or try to reduce the distance between them.
• 📶 Some buttons (such as Netflix or Prime Video) may not work even after learning.

5. setting up the universal mode (for control and TV, and MTS prefix)

If you use an MTS TV set-top box with a Xiaomi TV, you can program the remote so that it can control both devices simultaneously.

1. Connect the remote to the MTS console (if not already connected).
2. Press TV + OK on the remote until the LED flashes.
3. Enter the code for Xiaomi (see table in section 3).
4. Now the remote buttons will work like this: 📺 Power – Turns on/off the TV. 🎮 Home - Opens the MTS menu. 🔊 Volume – regulates the volume on the TV. 📶 Input switches the signal source between HDMI (prefix TV.

For convenience, you can reassign rarely used buttons (such as Text or Guide) to the functions of the TV.

1. Enter the training mode (see section 4).
2. Copy the signal from the native Xiaomi remote to the unnecessary button of the MTS remote.

For the Mi Remote app:

1. Download it from Google Play or the App Store.
2. Turn on Wi-Fi and Bluetooth on your TV.
3. In the app, select Add Device → Television → Xiaomi.
4. Follow the instructions on the screen (you will need to enter the code from the TV).

💡

Mi Remote supports voice control (via Google Assistant or Alice), which can be more convenient than the remote in everyday use.

FAQ: Frequent questions about connecting the MTS remote to Xiaomi