How to Tie a Remote to a Xiaomi TV: Instructions for All Models (2026)

Xiaomi's remote control has stopped responding to commands, or have you bought a new universal remote and don't know how to plug it in? The problem with syncing the remote and TV is one of the most common among Mi TV, Redmi Smart TV and even Xiaomi TV Stick owners. In most cases, the solution takes no more than 5 minutes, but requires accurate follow-up.

In this article, we will explore all the possible ways to tie the remote to Xiaomi’s technology, from standard synchronization of the original remote to manual code entry for universal devices. You will also learn what to do if the TV does not see the remote, how to reset settings and avoid errors. The instructions are relevant for models from 2018-2026 and work on all versions of the MIUI TV firmware.

If your remote is not fully responsive (the lights are not on, no buttons are working), first check the power and physical condition of the device. In 70% of cases, the problem lies in dead batteries or mechanical damage. If the remote is turned on but the TV does not respond, read on.

1. How to tie the original Xiaomi remote to a TV

Xiaomi’s original remotes (such as the Mi Remote Controller or Redmi Smart Remote) sync to the TV automatically when you first turn on. If communication is lost (for example, after resetting or replacing batteries), do the binding:

1. Turn on the TV with the power button on the case (if the remote does not work).
2. Press and hold the Menu + OK buttons on the remote at the same time for 5-7 seconds until the indicator starts flashing.
3. Bring the remote to a distance of 10-20 cm to the IR receiver of the TV (usually located on the right or bottom of the screen).
4. Wait until the indicator on the remote stops flashing and lights up constantly - this means that the synchronization was successful.

If the remote does not work after these actions, try an alternative method:

• 🔄 Turn off the TV for 1 minute, then turn it on again.
• 📶 Press the back combination on the remote. + Home and hold on for 10 seconds.
• 🔍 Check if the IR signal is blocking direct sunlight or other sources of infrared radiation (e.g. incandescent lamps).

Make sure the remote has working batteries | Check the integrity of the IR transmitter (no cracks or contamination) | Remove obstacles between the remote and the TV |Reboot the TV with a button on the case-->

Important: Xiaomi’s original remotes only work with TVs of the same brand. If you’re trying to tie a remote from the Mi TV 4S to the Redmi Smart TV X55, synchronization may not work – use universal codes (see next section).

2. Codes for binding universal remote to Xiaomi TV

If you use a universal remote (for example, Xiaomi Mi Universal Remote, One For All or Huayu), you will need to enter a special code to sync.

Instructions for entering the code:

1. Turn on the TV with a button on the body.
2. On the universal remote, press and hold the Setup (or Set) until the indicator blinks twice.
3. Enter the 4-digit code from the table above (e.g., 0123).
4. Press Power - if the TV turns off, the code fits.
5. Save the settings by pressing OK or Setup again.

If none of the code works, try automatic search:

1. Hold the Setup until the indicator doubles.
2. Press Power and hold until the TV is turned off (can take up to 2 minutes).
3. After turning off, press OK to save.

Original Xiaomi|Universal (One For All, Huayu, etc.)|Bluetooth-controller (Mi Remote Pro)|The remote from another TV |I don't know-->

3. Bluetooth remote (Mi Remote Pro, Mi Game Controller)

Modern Xiaomi models (such as Mi TV Q1 or Redmi Max 98) support Bluetooth remotes, including Mi Remote Pro and game controllers.

1. Turn on the Bluetooth remote, holding the power button for 3 seconds (the indicator should flash blue).
2. On the TV, go to Settings → Devices → Bluetooth.
3. Select Add Device and wait until the name of the remote appears in the list (for example, Mi Remote Pro).
4. Click on the name and confirm the pairing.

If the remote is not displayed in the list:

• 🔋 Check the battery (for Mi Remote Pro minimum level - 20%).
• 📱 Make sure the remote is not connected to another device (such as a smartphone).
• 🔄 Restart the TV and repeat the search.

💡

If the Bluetooth remote is connected but the buttons are not working correctly, reset it. To do this, hold Menu + Back for 10 seconds until the indicator goes out and again blinks.

Feature: Some models (such as the Mi TV Stick) only support one Bluetooth remote at a time. To connect a new one, first remove the old one in the Bluetooth settings.

4 What to do if the TV can not see the remote

If after all the manipulations, the TV doesn't respond to the remote, the problem may be a hardware or software malfunction.

• 🔦 Check the IR port of your TV: point your smartphone camera at the receiver and press any button on the remote. If you see flashing on your smartphone screen (like an IR LED), the port works.
• 🔄 Reset the TV settings: Settings → System system → Reset to factory (app data will be removed!).
• 📦 Update the firmware: Settings → On TV. → System update. For Xiaomi TV Stick use Mi Home on your smartphone.
• 🛠️ Check the remote on another TV (if possible) to determine if it is a problem.

If the remote previously worked but stopped responding, try reflashing it through the Mi Remote app (available for Android).

1. Download Mi Remote from Google Play.
2. Select Add Device → Television → Xiaomi
3. Follow the instructions on the screen to update the remote firmware.

⚠️ Warning: If after resetting the TV stopped turning on from the remote, use the power button on the case or connect the keyboard on the USB customize.

5. Remote binding to Xiaomi TV Stick and Mi Box

Xiaomi TV Stick and Mi Box S use Bluetooth remotes, so standard IR sync doesn't work here.

1. Connect the TV Stick to the TV and wait for the download.
2. Insert the batteries into the remote and press any button – the device must automatically connect.
3. If synchronization has not occurred, go to Settings → Remote and accessories → Add the device.
4. Select Xiaomi Remote and follow the instructions on the screen.

For the Mi Box S (MDZ-22-AB):

• 🔌 Connect the set-top box to the TV through HDMI.
• 🎮 Press and hold Home. + Back on the remote 5 seconds until the blue indicator flashes.
• 🔍 If the remote doesn't connect, reset it while holding the Menu + OK 10 seconds.

If after updating the firmware Mi Box S remote stopped working, roll back to the previous version through Settings → About console → System update → Recoil.

6. Alternative methods of control without remote control

If the remote is broken or lost, you can control the Xiaomi TV in alternative ways:

• 📱 Mi Remote appendix (Android/iOS): It allows you to control your TV via Wi-Fi or the IR port of your smartphone. TV Redmi Smart TV.
• 🖱️ mouse or keyboard USB/Bluetooth: Connect to the TV through the port USB. Use the Tab, Enter and arrows to navigate.
• 🎮 Gaming Controller: Connect Xiaomi Game Controller or DualShock 4 over Bluetooth and use the menu to control the game.
• 💻 ADB-commands: if the TV is connected to the same network as the computer, you can send commands via adb (for example, to restart the computer).

Instructions for Mi Remote:

1. Download the app from the App Store or Google Play.
2. Select Add Device → Television → Xiaomi
3. Follow the instructions on the screen. To control infrared, point your smartphone to your TV, and for Wi-Fi, connect to the same network.

💡

Mi Remote works even without the internet if the TV and smartphone are connected to the same local network.

To manage through ADB (advanced users):

adb connect [IP- TV address]:5555


adb shell input keyevent 3 # Pressing the Home button




adb shell input keyevent 26 Volume up

7. Frequent mistakes and how to avoid them

When you tie the remote, you often have typical problems, and here are the most common ways to solve them:

A few more nuances:

• 🔋 The Mi Remote Pro uses a battery, not a battery. Charge it before tethering (via a battery). USB-C).
• 📡 If your TV is connected to Wi-Fi at 5GHz, some remote features (such as voice search) may not work – switch to 2.4GHz.
• 🔧 For Xiaomi models TV Google TV (Like Mi. TV Q2) Separate settings are required in the settings → Remote and accessories.

⚠️ Note: Do not use remotes from other brands of TVs (such as Samsung or Samsung). LG) without first checking compatibility. Incorrect IR signals can cause a malfunction of the IR receiver Xiaomi.

FAQ: Answers to Frequent Questions