How to tie the remote to the TV Xiaomi Mi TV 4S 55: all ways and solutions to problems

Xiaomi Mi TV 4S 55 are popular smart-driven devices, but even they sometimes require manual adjustment of accessories. One of the frequent questions users ask is how to tie the remote to the TV if the original lost or universal counterpart is bought. The process seems simple but has nuances, from choosing the right synchronization mode to solving sudden crashes.

In this article, you will find step-by-step instructions for all types of remotes (original, Bluetooth, IR and universal), a compatibility table, and ways to eliminate errors when the TV does not respond to commands. We will analyze both the standard methods from the official Xiaomi manual, and alternative solutions from experienced users. If you encounter a problem after updating your firmware or resetting, there are answers here too.

Before you start, make sure the remote has a charge (for wireless models) or working batteries (for IR). On the Mi TV 4S 55 with MIUI TV firmware older than version 3.0, the automatic binding of the original remote takes no more than 30 seconds, but the versatile ones may require manual code entry.

Types of remotes for Xiaomi Mi TV 4S 55: what do you have?

Before setting up, it is important to determine what type of remote you are working with, and the binding algorithm depends on this:

• 🔘 Original Bluetooth remote (included) - synced automatically when the TV is first turned on. BLE 4.2.
• 📶 Infrared - requires direct view of the TV, often bundled with budget models or bought separately.
• 🔄 Universal remote (e.g. Xiaomi Mi Remote or third-party brands) – needs manual code entry or auto-search.
• 📱 Virtual remote (via the Mi Remote app on your smartphone) – works on Wi-Fi or Bluetooth.

The Mi TV 4S 55 (model L55M5-5ASR) most commonly uses a combined remote with both Bluetooth and IR support. If you lose the original accessory, the universal remote must support the NEC1 or RC5 protocol – these are used by Xiaomi in most TVs. Check this information on the box or in the remote control instructions.

2. Binding the original Bluetooth remote

If you buy a new original remote or reset your TV, you need to re-sync it.

1. Turn on the TV with the power button on the case (if the remote does not work).
2. Press and hold the Menu + OK buttons on the remote at the same time for 5-7 seconds until the indicator starts flashing.
3. Put the remote 10 to 15 cm to the TV, and the synchronization will happen automatically.
4. Wait for the message on the screen: "Remote connected".

If the TV doesn't respond:

• 🔋 Check the charge of the remote (connect to the USB-port).
• 🔄 Restart the TV through Settings → On TV. → Reboot.
• 📶 Make sure to use Bluetooth settings (Settings) → Devices → Bluetooth) no other connected gadgets – they can interfere with synchronization.

⚠️ Attention: On firmware MIUI TV older than 2.5.1, you may need to reset the remote via Settings → remote → Reset the connection. Then repeat the synchronization procedure.

3. Customization of the universal IR remote

Universal remotes (such as Xiaomi Mi Universal Remote or One For All) require manual code entry or auto-search. The following codes are suitable for the Mi TV 4S 55:

Instructions for binding:

1. Turn on the TV with a button on the body.
2. On the remote, press and hold the SET (or CODE SEARCH) until the indicator flashes.
3. Enter the 4-digit code from the table above.
4. Point the remote to the TV and press POWER. If the TV is off, the code is correct.
5. Save settings (on some remotes you need to re-press SET).

If none of the code works, use autosearch:

1. Hold the SET until the indicator flashes.
2. Press POWER and hold until the TV is turned off (can take up to 2 minutes).
3. Save the code you found.

💡

If the remote supports learning mode, point it to the original Xiaomi remote and record the button signals one at a time. This is the most reliable way for rare models.

4.Using the Mi Remote app on a smartphone

If you don’t have a physical remote, you can control your TV via your smartphone. Mi Remote (available for Android and iOS) supports Mi TV 4S 55 and allows you to:

• 📱 Control over Wi-Fi (if TV and phone are on the same network).
• 🔄 Use Bluetooth for basic commands (on/off, volume).
• 🎮 Customize gestures and voice control (on supported smartphone models).

Instructions for connection:

1. Download Mi Remote from Google Play or App Store.
2. Turn on the TV option Settings → Communication and Networks → Mi Remote.
3. In the app, select "Add device" → "TV" → "Xiaomi".
4. Follow the on-screen instructions for sync over Wi-Fi or Bluetooth.

⚠️ Note: To control Wi-Fi, the TV and phone must be connected to the same 2.4 GHz network. 5 GHz networks are not supported!

5. Problem Solving: TV doesn't respond to remote control

If after all the manipulations the remote does not work, check the following points:

To diagnose Bluetooth connection:

1. Go to Settings → Devices → Bluetooth.
2. Remove all the stored devices.
3. Turn off and turn on Bluetooth on your TV again.
4. Repeat the remote binding.

If the problem persists, check the TV firmware version (Settings → About TV → Software version). On versions older than MIUI TV 3.0, Bluetooth bugs may occur.

• 🔄 Update the firmware through Settings → Updating the system.
• 📥 If the update is not available, download the latest version from the official website and install it through USB.

💡

On the Mi TV 4S 55 with firmware below 2.3.1, the Bluetooth remote may not work. The solution is an update or manual binding via Settings → Remote → Add the device.

6. Alternative ways to control the TV

If the remote is permanently broken or lost, there are several ways to control the Mi TV 4S 55 without it:

• 🖱️ Mouse or keyboard via Bluetooth – connect via Settings → Devices → Bluetooth, convenient for navigating the menu.
• 🎮 Gamepad (e.g. Xiaomi Game Controller) – supports basic control functions.
• 🗣️ Voice assistant – if the TV is connected to Google Assistant or Alice from Yandex, you can use commands like “OK Google, turn on Xiaomi” TV".
• 🌐 Remote control via Mi Home – if the TV is added to the Xiaomi ecosystem, it can be controlled via the Mi Home app (requires a connection to a single Wi-Fi network).

To connect the keyboard or mouse:

1. Enable the device in pairing mode (usually a button on the box).
2. On the TV, go to Settings → Devices → Bluetooth.
3. Select the device from the list and confirm the connection.

The voice control is configured as follows:

1. Connect your TV to your Google or Yandex account in Settings → Accounts.
2. Activate the "Voice Search" option in the settings.
3. Say the command to the microphone of the remote or smartphone (if connected via Mi Remote).

7. Frequent mistakes and how to avoid them

User experience shows that most remote control issues on the Mi TV 4S 55 are due to three reasons:

1. Protocol incompatibility – universal remotes of cheap brands may not support NEC1, which is used by Xiaomi.Solution: buy remotes with support for Xiaomi (indicated on the package).
2. Bluetooth devices conflict – if speakers, headphones or gamepads are connected to the TV, they can block the remote signal. Solution: Turn off unnecessary devices in Settings → Bluetooth.
3. Failure after update - MIUI TV firmware sometimes resets the remote settings. Solution: reset the remote via Settings → Remote → Reset and re-attach.

Another common mistake is using a remote from another Xiaomi model, such as the Mi TV 4A remote not always compatible with the 4S 55 due to different chipsets. Check the model on the back of the TV sticker (L55M5-5ASR for 4S 55) and check with supported accessories on the official website.

⚠️ Warning: If the remote control stopped working after resetting the TV, don't rush to buy a new one. Try updating the firmware first - there was an error in the old versions that caused the Bluetooth remotes to "forget" after resetting.

FAQ: Answers to popular questions