How to change the time on the Xiaomi TV: a complete guide

Proper display of date and time on your Xiaomi Mi TV or Android TV is critical to the correct operation of all software. Incorrectly set timestamps can lead to app failures, inability to log into streaming services accounts and errors when watching IPTV. Often users are faced with a situation when after a power outage or a voltage surge, the settings are reset to standard factory values.

Xiaomi’s modern smart TVs rely on precise timing not only to display in the corner of the screen, but also to verify security certificates. If the clock lags or runs ahead, browsers and apps may refuse to connect to servers, considering the connection unsafe. In this article, we will detail all the available synchronization methods, from automatic settings through the network to manual data entry.

In some cases, the problem is not with the TV itself, but with the wrong time zone selection, especially if you're using a device brought from another region. Automatic synchronization usually solves 90 percent of the problems, but knowing manual techniques is essential for every smart tech owner. Let's look at the setup process in stages to eliminate any errors in the system configuration.

Automatic synchronization through the network

The most reliable and easy way to set the exact time is to use the built-in Internet synchronization function. NTP (Network Time Protocol) allows the TV to receive accurate data from time servers automatically. To work this method, your device must be connected to the network, whether it is Wi-Fi or a wired Ethernet connection.

To activate this option, you need to go to the system settings menu. Usually the path is: Settings → Additional settings → Date and time. In the window that opens, find the "Auto-Time" or "Use Network Time" switch and put it into an active position. The TV will contact the server and display current metrics.

⚠️ Note: If automatic synchronization is enabled but the time is displayed incorrectly, check if the time zone is set correctly in the same menu. Often the system detects it automatically, but may miss one or two hours.

It is important to understand that for the correct work NTP-The right time zone should be set on the TV, even if the time is pulled up from the server, without the right belt, it will be displayed with a shift. Make sure that your city or the corresponding region is selected on the list, for example, Moscow Time for central Russia.

Manual date and time setting

In situations where there is no Internet connection or automatic synchronization fails, manual setting is the only option, a method that requires care, as incorrectly entering even one value can lead to functional limitations of some applications. Manual mode is often used when you first set up your TV before connecting to the router.

To go manual, you need to turn off the automatic detection option in the Date and Time menu. Then the input fields will become active. Use the directional pad on the remote control to navigate between the fields of the year, month, day, hour and minutes. Press the central confirmation button to change the values.

Note the time format: Android TV, which is the mainstay of Xiaomi TVs, often uses the 24-hour format by default. If you're familiar with the 12-hour format with the designation AM/PM, look for the appropriate "Use 24-hour format" switch and turn it off. This will only change the display, but will not affect the internal logic of the system.

💡

When manually setting the time, try not to set the second exactly at 00, but add a couple of seconds – this will help the system synchronize with network time later more accurately.

Setting up the time zone and region

One of the most common reasons for time discrepancies is the wrong time zone. Xiaomi TVs often have global firmware, where the list of cities can be in English or contain non-obvious region names. Time zone determines the offset relative to the coordinated world time (UTC).

If you live in a region where daylight saving time is practiced (although many countries, including Russia, have it abolished), make sure that the automatic switch option is not active if your system does not support it correctly. Otherwise, in winter or summer, time may "jump" an hour forward or backward without your knowledge.

The table below gives examples of time zone designations for major cities that may be found on your TV menu:

When choosing a city, not only focus on the name, but also on the current offset, if it is displayed. If your city is not on the list, select the nearest large city located in the same time zone, which will ensure that all time stamps in the system work correctly.

Problems with resetting time after switching off

A situation where, after a complete shutdown of the TV (out of the socket or a power surge), the time is reset to factory (for example, January 1, 2000), indicates a problem with the internal power of the settings. In modern Xiaomi TVs, a small backup battery or a capacitor on the motherboard is responsible for storing these parameters.

If the reset occurs regularly, it may indicate a discharge of the battery or a malfunction (motherboard). While the device is on the network, even in sleep mode, the capacitor is recharged. However, prolonged lack of power leads to a loss of settings, in which case the only solution is to adjust the time again after each turn on or keep the TV in standby mode, rather than pulling the cord.

⚠️ Attention: Constant time reset can also be a sign of a software bug in the firmware. Try to completely reboot the system through the menu or disconnect the TV from the network on the Internet. 5-10 minute.

For models with external power supplies or specific remotes, the use of the “Fast Start” function sometimes helps, in which the TV does not turn off completely, but goes into deep sleep mode, keeping power on the motherboard and not requiring re-tuning the time each time it turns on.

The impact of time on applications and certificates

Many users underestimate the importance of accurate time for applications to run. SSL/TLS security protocols used to encrypt connections in browsers, YouTube, Netflix, and other services strictly check the system time of a device. If the time on the TV differs from the real one by more than a few minutes, the server may reject the connection, considering the security certificate invalid.

The "Security Certificate Not Valid" or "Server Connection Fails" error is often solved by correct date settings. Applications cannot verify the validity of encryption keys if the watch has run into the past or future. It is a security mechanism that cannot be circumvented without setting the time.

In addition, DVR, task scheduler, and parental control records are also dependent on system time. If you plan to record a TV show for a certain time and the TV clock is behind, recording either won't start or won't start on time. It's critical to synchronize time before setting up any automatic TV features.

💡

Wrong time is the most common cause of Internet connection errors on smart TVs, even with proper Wi-Fi.

Use of third-party applications for synchronization

In rare cases, when standard Android TV features on Xiaomi TVs are not working properly, you can use third-party software. In the Google Play Store or through the installation of APK files, you can find utilities for synchronizing time, such as "Date & Time Sync".

These applications allow you to request time from alternative NTP-servers, which can help if standard Google servers are blocked or unavailable in your region, but it is worth remembering that installing applications from unknown sources requires you to turn on the "Unknown Sources" mode in the security settings.

The use of third-party software is justified only if the usual methods to solve the problem fail.Be sure to check the ratings and reviews about the application before installing, so as not to download malware that can slow down the TV.

Frequently Asked Questions (FAQ)