Xiaomi TV A2 remote: full instructions for setting up and using

Introduction: Why Xiaomi TV A2 remote is a question

Xiaomi TV A2 has gained popularity thanks to a combination of affordable prices, high-quality screen and functional firmware Google TV. However, many users face difficulties when first familiarizing themselves with the remote control (DU) of this model. Unlike traditional remotes with dozens of buttons, the device from Xiaomi is minimalist – and it is both plus and minus.

On the one hand, the compact design and touchpad make the control intuitive for those who are used to smartphones, on the other hand, the lack of familiar physical keys (for example, digital buttons or direct access to audio settings) causes confusion, and this article will help you understand everything from basic control to hidden functions that are not written in the official instructions.

We analyzed user reviews, tested the remote on different firmware, and collected answers to the most common questions, and we will focus on the problem of invisible gestures on the touch panel, which is supported by only 60% of users the first time.

Discussion of the buttons of the remote: what is where and why you need

Xiaomi TV A2 has only 7 physical buttons and a touchpad.

🔴 Power button: Turn on/off the TV. Long press (3 seconds) causes the menu to reboot or go into standby mode.
📺 Home – Returns to the main screen of Google TV. Double-click opens list of recent apps.
🔍 Search (Microphone) - activates the voice assistant Google Assistant, works only when connected to the Internet.
⚙️ Settings: Quick access to the TV's settings menu. Holding opens up extended settings.
📶 Sources (Input) – switching between HDMI, USB and other entrances.
🔊 Volume control -- two touch bars to the right of the panel. Touch changes volume, swipe up/down switches channels.
🖱️ Touchbar - replaces the mouse. Supports taps, swipes and retention (similar to right-click).

Important: The Netflix button (if you have a remote on your revision) is not hardware--it is a programmable key that can be reassigned to another application through settings.

📊 What is the most convenient way to manage?

Physical buttons

Touch panel.

Voice assistant

Mobile app

Touchbar: gestures that not everyone knows

The Xiaomi TV A2 touchpad is not just a cursor replacement, it supports multi-finger gestures similar to smartphones but with limitations. Here is the full list:

Gesture.	Action.	Example of use
Single tap	Selection of an element (analogue of left mouse click)	Opening an application or confirming an action
Double tap.	Back a Step (similar to the Back button)	Closing the menu or exiting the application
Containment (2 seconds)	Context menu (analogue of right click)	Removal of the application or change of its position
Swipe left/right	Scrolling through the horizontal menu	Switching between tabs on YouTube
Swipe up/down on the right side	Volume adjustment or channel switching	Change the sound without switching to the menu

Hidden feature: If you swipe two fingers down the touchpad, the notification bar will open (similar to the curtain on Android smartphones). This only works on firmware newer than 1.4.67.

⚠️ Warning: Touch panel may not respond to gestures if the remote is discharged to below 15%. charging takes 2 hours from USB-port.

☑️ Checking the operability of the sensor

Make sure the battery is charged.Wipe the panel with a dry clothReboot the remote (remove the battery for 10 seconds)Update the TV firmware to the latest version

Done: 0 / 4

Connecting and synchronizing the remote with the TV

In 90% of cases, the Xiaomi TV A2 remote will automatically connect when you first turn on the TV, but if the sync has not occurred or the remote has stopped responding, follow the following steps:

Make sure the TV is on and on standby (the indicator is lit red).
Hold the remote 10-15 cm from the IR receiver (usually located on the right or bottom of the screen).
Press the Home and Back buttons at the same time (←) 5 seconds until the indicator on the remote does not flash twice.
The message will appear on the TV, "Connect remote..." Wait 10-15 seconds.

If the synchronization fails:

🔋 Check the battery power (the indicator on the remote should be green when pressing any button).
📶 Make sure there are no obstacles between the remote and the TV (glass, metal).
🔄 Restart the TV through the power button on the case (hold 10 seconds).

For models Xiaomi TV A2 43"/55" with firmware 2.0.+ is available to connect via Bluetooth. Activated in the Settings menu → Devices → remotes → Add Bluetooth remote.

⚠️ Warning: After updating the TV firmware, the remote may require re-synchronization. This is normal - just repeat the connection procedure.

What if the remote lost communication after the update?

If the TV stopped responding to the remote after the update, try resetting the DU. To do this: 1. Remove the battery from the remote for 30 seconds. 2. Turn on the TV with a button on the case. 3. Press the Home + Volume up for 8 seconds until the indicator flashes red. 4. Bring the remote to the TV - automatic synchronization should begin.

Control of TV without remote control: alternative methods

If the remote is lost, discharged or broken, you can control the Xiaomi TV A2 in several alternative ways:

📱 Mobile app: Mi Remote (for Android) or Google Home (for Android) iOS/Android). Requires a TV and smartphone to connect to the same Wi-Fi network.
🖱️ USB-Mouse/keyboard: Connects to the port USB-A It works on the back, without any additional drivers.
🎮 Gamepad: Xbox or PlayStation controllers are supported via Bluetooth (on firmware newer than 1.5.82).
🖥️ HDMI-CEC: If the TV is connected to the receiver or sound panel through HDMI, You can control it from their remotes (the function must be included in the Settings). → Devices → HDMI-CEC).

For emergency control without additional devices:

Press the physical power button on the back of the TV (hold 1 second to turn on).
Use the Volume +/- and Input buttons on the case for basic navigation.
To access the menu, press and hold Input for 3 seconds – the Quick Settings Panel will open.

💡

If you have an Android smartphone, turn on the Remote screen feature in the Mi Remote app, which allows you to stream the image from your TV to your phone and control it as a touchpad.

Solving common remote control problems

Analysis of Xiaomi support calls shows that 75% of the problems with the TV A2 remote are related to five situations.

1.The remote does not respond to pressing

Causes and solutions:

🔋 Battery discharge: Charging takes 2 hours from USB-The indicator should be red during charging and green after finishing.
📶 IR interference: Remove the obstacles between the remote and the receiver. Sunlight can block the signal.
🔄 Synchronization failure: Reconnect (see section above).

2.The touch panel is not working properly

Most often it is due to contamination or damage to the sensor.Wash the panel with a walnutless cloth soaked in isopropyl alcohol (do not use wet wipes!).

Update your TV firmware to the latest version.
Reset the remote settings (remove the battery for 1 minute).
Check the remote on another Xiaomi TV A2 (if possible).

3.The buttons are working, but with a delay

A delay of more than 1 second indicates:

📡 Problems with Wi-Fi/Bluetooth: Reconnect the TV to the network or reset the network settings.
🖥️ System Overload: Close background applications through Settings → Annexes → Launched.
🔋 Low battery power remote: Even if the indicator is on, a charge below 20% can cause lags.

⚠️ Note: If the remote control has stopped working after the remote has fallen (for example, Volume or Home), this indicates damage to the PCB. In this case, a replacement of the remote control is required - repair is more expensive than a new device.

Hidden functions of the remote, which are not written in the instructions

The Xiaomi TV A2 has some undocumented features that make it easier to interact with your TV:

🎮 Gamepad mode: Hold the Home button for 3 seconds to activate the virtual joystick on the touchpad. Useful for emulators and simple games.
🔍 Quick search: Double pressing the button Microphone reveals the history of the latest voice queries.
📼 Screenshot: Simultaneously pressing Volume Down + Home saves a screenshot in the folder Pictures/Screenshots TV-wise.
🔇 Silent Mode: A quick double tap on Volume Down turns off the sound (repeated tap restores the previous level).
🔄 Rebooting the TV: Hold on to Input + Volume up 5 seconds for soft reboot (analogue "Reboot" in the menu).

For models with NFC-chip (marking) NFC on the back of the remote control) quick parking function is available: attach the remote to the NFC-tag on the TV (usually next to the logo) to instantly turn it on and switch to the last source used.

💡

Home + Back + Volume up (hold 5 seconds) resets the remote to factory settings. Use this if the remote is not working properly after the upgrade.

FAQ: Answers to Frequent Questions

Can I use the remote from Xiaomi TV A2 with other Xiaomi models?

Yes, but with limitations. The remote is compatible with Google TVs (e.g. Xiaomi TV A Pro or Mi TV Q2), but won't work with PatchWall models (e.g. Mi TV 4A). To sync with another TV: Keep Home + Volume up 8 seconds until the light flashes. Bring the remote to the new TV 5-10 cm. Press OK (touch tap) to confirm the connection. Note: some features (e.g. voice search) may not work on non-native TVs.

How to reassign the Netflix button to another app?

The Netflix button (if you have one on your remote) is programmable. To reassign it: Go to Settings → Devices → Remotes → Customize buttons. Select the Netflix button. In the list of applications, select the desired one (for example, YouTube or Prime Video). Save the changes and reboot the remote (remove the battery for 10 seconds). If the desired application is not on the list, you can assign any program to run through ADB (technical skills are required).

Why does the remote discharge so quickly? Is it normal?

Average operating time of Xiaomi remote TV A2 One charge: 3-4 months with active use (2-3 hours a day). If the battery goes down in a week, check it: 🔌 Charging quality: Use the original cable USB-A to USB-C (Cheap cables may not provide enough current. 📡 Permanent Bluetooth connection: Disable it in Settings → Devices → DU remotes → Connection mode (select IR). 🔍 Background: Close unnecessary apps on your TV, they can keep the remote in active condition. If the problem persists, contact the service center - a battery defect is possible (12 months warranty).

Can I connect two remotes to the TV at the same time?

Yes, Xiaomi TV A2 supports up to 4 remotes in memory. To connect the second remote: Turn on the TV with the first remote. On the second remote, hold Home + Volume up to 5 seconds. Bring the second remote to the TV, a notification will appear "New remote is detected." Confirm the connection by pressing OK on the first remote. Both remotes will work independently. To delete one of them, go to Settings → Devices → Remotes → Device Management.

How to reset the remote to factory settings?

There are two ways to reset: Mild reset (retains the tether to the TV, but resets the button settings): 1. Remove the battery for 30 seconds. 2. Put the battery back in 3. Hold the Home button for 10 seconds. Hard reset (removes the tether completely): 1. Hold Home + Volume up + Volume down" 15 seconds. 2. The indicator blinks red 3 times - release the buttons. 3. The remote will be ready for a new synchronization.