How to Connect Xiaomi True Wireless: A Step-by-Step Guide

Modern wireless headphones from Xiaomi have gained popularity due to the excellent value for money, as well as the ease of use of True Wireless Stereo technology. However, the process of initial pairing or reconnecting to a new device often raises questions among users, especially if we are talking about models without physical control buttons. Incorrect sequence of actions can lead to the fact that the gadget will not be visible in the list of available Bluetooth devices.

In this article, we will discuss in detail all the stages of connecting a headset, consider the nuances of working with the Xiaomi Earbuds application and offer solutions for typical synchronization errors. Understanding the principles of the Bluetooth protocol in the Xiaomi ecosystem will allow you to avoid common errors and enjoy high-quality sound without delay.

Preparation of headphones and smartphone for pairing

Before you try to find the device in the phone settings, you need to make sure that both gadgets are ready to establish a connection. Charge the case and the headphones themselves to at least 20-30%, as at low charge, some models of Mi True Wireless can go into power saving mode and hide from search.

Make sure the wireless module is on and visible to other devices. It is important for Android owners to check that geolocation is enabled, as current versions of the operating system require this permission to scan the peripherals correctly. If you are using an iPhone, make sure that iOS is updated to the current version for better compatibility with AAC and SBC codecs.

⚠️ Note: If the headphones were previously connected to another phone, they can automatically try to connect to it when retrieving from the case. temporarily turn off Bluetooth on the old device or select "Forget the device" in its settings.

There are several ways to activate pairing mode, and they depend on the specific model of your headphones. Owners of models with touch panels, such as the Xiaomi Redmi Buds 3 Pro, need to know the exact sequence of touches, whereas for simpler versions, long enough retention.

• 🎧 Remove both earphones from the charging case at the same time to activate standby mode.
• 🔋 Check the indicators: flashing white or blue light usually signals readiness for a conjugation).
• 📱 Make sure the distance between the phone and the headphones is less than 1 meter during the first setup.

Activation of the mode (Pairing Mode) on different models

The process of putting the headset into visibility mode can be drastically different depending on the physical button on the charging case. For Mi True Wireless Earbuds Basic 2 or Redmi Buds models without a button on the case, you need to use touch control. You need to remove the headphones and touch the touch areas on both devices simultaneously, holding your finger for about 5-7 seconds until the color of the indicator changes.

If your case is equipped with a pairing button (often found in older models like Xiaomi Buds 3 Pro or Mi True Wireless Earphones 2), the procedure is greatly simplified. Open the case lid without removing the headphones, and press the button on or inside the case. The indicator should start flashing quickly, which means successful launch of the detection mode.

Sequence for models without a button:


1. Remove the headphones.




2. Touch the left and right earphones at the same time.




3. Hold 5 seconds until the indicator flashes.

If the indicators flash at different speeds or colors, it is possible that the headphones are out of sync with each other (the left does not see the right one), and a reset procedure will be required.

Connection process via Bluetooth settings

Once you activate the Visibility mode on the headset, go to your smartphone. Open the settings menu and select the Bluetooth partition. Press the scan button or just wait for the system to update the list of available devices. The name of your model should appear in the "Available Devices" list, for example, Mi True Wireless EB Basic or Redmi Buds 3.

Click on the device name to start the pairing procedure. The system can request confirmation of the access code or simply notify you of a successful connection. At this point, the headphones usually hear a voice message "Connected" or a characteristic audible signal confirming the establishment of communication over the A2DP protocol.

Sometimes Android or iOS may offer an additional application for advanced management. Accept installation if you want to access equalizer settings, firmware updates and gesture changes. Without this application, headphones will work as standard, but functionality may be limited.

Using the Xiaomi Earbuds app to customize

To fully unlock the potential of your Xiaomi True Wireless, it is recommended to use the official Xiaomi Earbuds app (or Mi Earbuds). Once you connect the headset, launch an app that will automatically detect the device and prompt you to add it to the list. This will allow you to visualize the charge level of each headphone separately and the case.

Inside the app, an equalizer is available with presets (Bas, Vocal, Twitter) and the ability to manually adjust frequencies. You can also reassign actions when touching the headphones: set up a double touch to switch tracks or triple to call a voice assistant. Some models support noise reduction (ANC), transparency mode and wear detection, which are controlled exclusively through this software.

Remember to check the update section of the app periodically. Xiaomi engineers often release patches that fix channel desynchronization problems or improve the quality of the microphone when calling. Lack of up-to-date firmware is one of the main reasons for the unstable operation of the Bluetooth connection.

💡

If the app doesn’t see the headphones, try running it after the headphones are connected in Bluetooth system settings, rather than before the connection.

Solving Connection and Desynchronization Problems

When only one headphone is running or they can't see each other, it's called out-of-synchronization, which is a common problem with TWS technology, caused by voltage surges or protocol errors, and you have to do a full hard reset to the factory settings to solve this problem.

The reset procedure usually looks like this: place both headphones in the case, leaving the lid open. Press and hold the button on the case (or touch areas on the headphones if there is no button) for 10-15 seconds until the indicator flashes orange or white several times. After that, remove the device from the Bluetooth list on the phone ("Forget the device") and perform the pairing again.

⚠️ Note: When you reset, all custom configurations, including button assignments and equalizer, will be returned to factory values.

If the problem persists, try “clearing the Bluetooth cache” in the developer’s Android settings, and it’s also worth checking if the air is overloaded with other Wi-Fi signals (especially at 2.4 GHz), as this can interfere with the audio stream.

• 🔄 Remove the device from the Bluetooth list on your phone ("Forget the device").
• 📵 Turn off Bluetooth on your phone for 10 seconds, then turn it on again.
• 🔋 Completely reset your headphones (Hard Reset) according to the instructions above.
• 🔗 Repeat the pairing procedure as with a new device.

💡

In 90% of cases, connection problems are helped by a full reset (Hard Reset) and re-pairing with the removal of the old profile in Bluetooth.

Optimization of work and useful tips

To ensure stable operation Xiaomi True Wireless for a long time to monitor the purity of the charging contacts. oxidation of contacts can cause one of the headphones will discharge faster or not charge at all, which will eventually cause desynchronization.

Avoid using headphones in areas with powerful sources of electromagnetic interference, such as microwave ovens or industrial equipment. Although Bluetooth 5.0 and higher is well-proof, extreme conditions can interrupt the connection. Also try not to leave the case with headphones in the cold or in direct sunlight, as lithium polymer batteries are sensitive to temperature changes.

⚠️ Note: Do not use headphones if the body is damaged or moisture is inside, even if the model has protection. IPX4. Internal short circuit could permanently disable Bluetooth module.

Regular software updates through an app are the best way to get new features and security fixes, and manufacturers often add support for new codecs or improve noise reduction algorithms through software updates rather than hardware changes.

Frequently Asked Questions (FAQ)