How to connect the second remote to the TV Xiaomi Mi TV: 3 working methods

Connecting the second remote to the Xiaomi Mi TV TV — A second console may be needed for convenience (for example, if the main console is lost or discharged), for separate control of children and adults, or to customize individual buttons for specific scenarios. However, not everyone knows that Xiaomi TVs support synchronization of several remotes at once – both original and universal.

In this article, we will analyze all the current ways to connect the second remote to the Mi. TV 4A/4S/4C/5/5X/Q1/Q2 And other models, including nuances for IR and Bluetooth devices, you'll learn how to avoid common mistakes, what to do if the TV can't see the remote, and how to check whether universal models are compatible.

What remotes are compatible with Xiaomi Mi TV

Before connecting, it’s important to make sure the second remote is supported by your TV model. Xiaomi uses two types of connection:

• 📶 Infrared (IR) – operate on the principle of directional signal, require line of sight, suitable for most universal remotes (for example, Xiaomi Mi Remote old sample).
• 🔵 Bluetooth - modern models (Mi) TV Q1/Q2, 5X) Supports wireless remotes without the need to "aim." The original Xiaomi remotes of the latest versions use this protocol.

The table below shows the compatibility of remotes with popular TV models:

⚠️ Note: If you use a universal remote control (for example, BBK, Huayu, or remote from another TV, make sure it supports codes for Xiaomi.A list of codes is usually listed in the instructions to the remote. TV The most common codes are 0178, 0145 or 0060.

Method 1: Connecting the second original remote (IC or Bluetooth)

If you have a second original Xiaomi remote (such as a spare from the kit or purchased separately), it will take no more than a minute to sync it.

For IR panels (all models)

The IR panels don't require special pairing, they work right after the batteries are installed, but if the second panel doesn't respond, they're like,

1. Make sure that the remote has working batteries (preferably new).
2. Point the remote to the TV’s IR receiver (usually located at the bottom of the screen under the logo).
3. Press and hold the Power button (or OK) 5-10 seconds before the TV reacts.

💡

If the IR remote doesn't work, check it with your smartphone camera: point the remote to the camera and press any button. If you see flickering on the screen, the remote is good.

For Bluetooth remotes (Mi) TV 5/5X/Q1/Q2)

Bluetooth remotes require a mating procedure. Here's how to do it:

1. Turn on the TV with the main remote.
2. Go to Settings → Devices → Bluetooth.
3. Click Add Device and select Remote from the list.
4. On the second remote, press and hold the Back buttons. + Home (or Menu) + OK, depending on the model) for 5 seconds until the indicator starts flashing.
5. Wait for the remote to appear in the list of devices on TV and confirm the connection.

Make sure the TV is on and on the Bluetooth menu|

Check the battery charge in the remote|

Press the button combination to activate the mating mode|

Confirm the connection on the TV screen-->

⚠️ Note: On some models (Mi) TV Q1 75") after connecting the second Bluetooth remote, the synchronization of the first one may be lost.

Method 2: Configure a universal IR remote

Universal remotes (e.g. One For All, Philips, or cheap Chinese models) require manual adjustment to Xiaomi Mi. TV. The process depends on the remote model, but the general scheme is as follows:

1. Turn on the TV with the main remote.
2. On the universal remote, press and hold the Setup (or Set, Code Search) button until the indicator blinks.
3. Enter the code for Xiaomi (see list below) using digital buttons. The indicator should go out after entering correctly.
4. Check the Power, Volume, Channel buttons, and if they don't respond, repeat with another code.

List of codes for popular universal remotes:

• 🔢 One For All: 0178, 0145, 0060
• 🔢 Philips: 0002, 0179
• 🔢 BBK/Huayu: 004, 013, 025
• 🔢 Cheap Chinese remotes: 0000 (auto search)

⚠️ Note: Universal remotes often don’t have hot buttons (such as Netflix or Prime Video) and can be manually reassigned via the remote menu (if supported).

Method 3: Using a smartphone as a second remote

If you do not have a second physical remote, you can use a smartphone on Android or iOS. For this, the official Mi Remote application or third-party solutions like Peel Smart Remote are suitable.

Configure via Mi Remote (official application)

Xiaomi’s Mi Remote app supports all Mi models TV It allows you to control the TV through an infrared port or Wi-Fi (for new models:

1. Download Mi Remote for Android or iOS.
2. Connect your smartphone and TV to the same Wi-Fi network (required!).
3. Launch the app, select Television → Xiaomi.
4. Follow the instructions on the screen for synchronization.

💡

To control over Wi-Fi, the TV and smartphone must be on the same local network. IR control works without the Internet, but requires an IR transmitter in the smartphone (there are not in all models).

Alternative annexes

If Mi Remote is not suitable, try:

• 📱 Peel Smart Remote – supports IR and Wi-Fi, there is Russian language.
• 📱 Yatse: Remote Control – Extended features for smart TVs.
• 📱 Google TV (For Android, if your Mi is yours TV Google-based TV (model 2023+ year-end).

⚠️ Attention: Wi-Fi may be delayed by 0.5-1 seconds. For games or fast channel switching, it is better to use IR or Bluetooth.

Solving problems when connecting the second remote

If the second remote is not working, check the following points:

If the problem is not solved, reset the remote settings:

1. Remove the batteries from the remote for 10 minutes.
2. Press and hold any button for 20 seconds (discharge the capacitors).
3. Set the batteries back and reconnect.

💡

On the Mi models TV Q2 After updating the firmware, the connection with Bluetooth remotes may be lost, in which case resetting the TV network settings in the Settings menu will help. → System system → Resetting the network.

How to disable the second remote from Xiaomi Mi TV

If the second remote is no longer needed or conflicts arise, it can be removed from the system.

For IR remotes

The IR panels don't require a "detachment" -- they just stop working when there's no signal, but if the remote gets in the way (for example, accidentally switches channels), it's enough:

• 🔋 Remove the batteries.
• 🗑️ Dispose of the remote (if it is broken).

For Bluetooth remotes

To remove the Bluetooth remote:

1. Go to Settings → Devices → Bluetooth.
2. Find your remote in the list of connected devices.
3. Then click on it and select Delete (or Forget the device).

⚠️ Note: Some firmware may require a reboot of the TV after removing the Bluetooth remote (in the Settings menu). → System system → Reboot).

FAQ: Frequent questions about connecting the second remote

Tips for choosing a second remote for Xiaomi Mi TV

If you are just planning to buy a second remote, pay attention to the following criteria:

• 🔋 Type of connection: For models 4A/4S Any IR remote will do. 5X/Q1/Q2 Bluetooth is more reliable and does not require “targeting".
• 🎛️ Functionality: Xiaomi’s original remotes have buttons for fast access to Netflix, Prime Video and voice assistant.
• 💰 Price: Original remote: ~1 500–2 500 ₽. Universal IR: from 300 ₽. Bluetooth remote of a third-party brand: ~1 000–1 800 ₽.

💡

The best choice for most users is the original Bluetooth-based Xiaomi Mi TV Remote R2. It is compatible with all 2020 models.+ It has voice search and does not require a TV hover.

If the budget is limited, take a universal IR remote with support for Xiaomi codes (for example, BBK UR-58 or Huayu HY-622). They are cheaper but less comfortable.

⚠️ Avoid cheap no-name remotes without labeling – they often have an unstable IR signal, which causes buttons to fire every time or require multiple pressing.