Modern Xiaomi TVs with Android TV operating system open up huge multimedia opportunities for users, but many owners are in no hurry to abandon proven satellite TV. The question of how to connect Tricolor to Xiaomi TV remains relevant for those who are used to stable signal quality and a wide list of channels. Integration of a satellite antenna with a smart screen does not require complex equipment, but has its own technical nuances that must be considered when installing.
The main difficulty is that most models of Xiaomi TVs do not have a built-in satellite tuner. DVB-S2. This means that simply inserting the cable from the antenna into the connector on the back of the device will not work — the TV will not be able to decode the signal. CAM-In this article, we will discuss in detail all available methods of receiving a signal so that you can choose the best option for your model.
Before you start a physical connection, it's important to make sure you have a valid subscription and the satellite antenna is correctly aligned. If you already have Tricolor set up on an old TV, the antenna is probably already pointing correctly. However, if you install the system from scratch, you'll need help from a specialist to set up the dish, because even a minimal deviation will lead to a loss of signal. After preparing the equipment, you can move on to the method of connection.
Selection of equipment for connection
The first step to watching your favorite shows is to determine the type of equipment that will process the satellite signal. TV redmi TV You'll need an extra device, but there are two main ways to do this: use a card. CAM-Module (if there is a connector in the TV) CI+) Or you can connect an external receiver, depending on the year your TV was released and the availability of the Common Interface slot.
Modern models are often equipped with a slot CI+, This allows you to insert the operator access card directly into the TV through a special adapter (CAM-This solution allows you to control viewing from one remote control without using excessive technology, however, if your model of Xiaomi TV does not support the protocol. CI+ or does not have a suitable connector, the only option is an external satellite receiver that connects through the HDMI-port.
⚠️ Attention: Before buying CAM-The module must check the specification of your particular TV model on the official website. TV Support satellite access cards even if you have a physical slot.
Operator "Tricolor" actively promotes its proprietary consoles that provide access to interactive services and archive transmissions. Using an external receiver is the most versatile way that is guaranteed to work on any Xiaomi TV, regardless of the version of Android TV. In this case, the TV acts exclusively as a monitor, and all the work on decoding the signal takes the console.
Connection through CAM-module (CI+)
If the technical documentation for your Xiaomi TV confirms the presence of a slot CI+ And it's going to be the most aesthetic way to do this, and it's going to be the most access modules. CAM-A module compatible with Tricolor and insert a smart card into it. It is important to be careful when installing the card: the chip should be pointed to the side indicated on the circuit next to the slot, and the card itself should be snapped with a characteristic click.
After the physical installation of the module, you need to enter the settings menu of the TV. TV It may vary depending on the firmware version, but the general path usually looks like this: go to Settings. → Channels → Channel settings: You should select the source of the Satellite signal or «DVB-S/S2». If the menu item is inactive or missing, then your TV does not support direct connection of the satellite antenna without the console.
☑️ Checking readiness for setup CI+
When you select automatic channel search, the system can request operator choice, search for Tricolor or select Others, scanning can take 5 to 15 minutes depending on the number of transponders, display progress bar, and after the search, the TV will suggest sorting the channels found, removing radio stations or hidden services.
| Parameter | Meaning for the Tricolor | Note |
|---|---|---|
| Satellite. | Eutelsat 36B / Express AT1 | Position 36°E. |
| Frequency (LNB) | 10750 MHz | Standard for circular polarizations |
| Polarization | Circular | Sometimes required in manual settings |
| Flow speed | Auto/Automatically | No manual input required. |
It is important to note that when using CAM-The functionality of the module can be limited to basic TV viewing. Interactive functions such as Tricolor Cinema and TV or voice control through the TV remote for switching channels may not work correctly or at all. DVB Android operating system TV.
Use of external console (receiver)
The most reliable and functional way to connect Tricolor to Xiaomi TV is to use an external satellite receiver, which takes a signal from a satellite, decodes it and transmits the finished image to the screen via a digital interface. HDMI-cable, which usually comes with a prefix, or a quality analogue that supports resolution 4K and HDR, If your TV has these characteristics.
The connection process is physically simple: connect the HDMI OUT output on the console to any free HDMI IN port on the TV. After switching on both devices, switch the signal source on the TV. To do this, click the button with the image of the square and arrow (or the Input button) on the Xiaomi remote control and select the appropriate port, for example, HDMI 1 or HDMI 2.
💡
Use it. HDMI-Cable version 2.0 or higher if you have 4K-The TV and the console support high resolution, which will allow the transmission of images without delay and artifacts.
One of the advantages of this connection is the ability to use the HDMI-CEC function. This technology allows you to control the console using the remote from the TV. To activate this option, go to the settings of the Xiaomi TV along the Settings → Preferences → Device Management and make sure that the HDMI Control (or CEC) switch is on. This will allow you not to look for the second remote and switch the channels of the Tricolor with the main volume button or navigation.
If you are using an old set-top box with a tulip connector (RCA) and the new Xiaomi TV does not have analog input, you will need a special AV-to-HDMI converter. However, the image quality in this case will be limited to the SD standard (720×576), which on large screens can look blurry.
Channel setting and signal search
After you physically connect and select the source, you need to set the channels. If you use an external console, all the settings are made in its own menu, which is displayed on the TV screen. The Tricolor menu is usually intuitive: you need to choose "Find channels" or "Auto-scanning." The Xiaomi TV at this point just broadcasts the picture and does not participate in the scanning process of frequencies.
In case of connection through CAM-You can search the TV, go to the channel settings menu and select Satellite. LNB (a) the following values shall be set: type LNB — Universal or Single, Nutrition LNB — On, 22 kHz - Auto. The frequency range of heterodin for Tricolor converters is usually 10750 MHz.
⚠️ Note: If after searching channels are found, but when switching, a message appears “No signal” or “encoded”, check the correct installation of the smart card in the “Smart Card” CAM-Also make sure your subscription has not expired.
To manually add a channel or check signal quality, you can use the Manual Adjustment function. Enter one of the frequency bands, such as frequency 12226, polarization vertical (or left for circular) and flow rate 27500. The scale of signal level and quality will appear on the screen. If the scales are empty, check the integrity of the cable and the connection of the F connectors.
What should I do if the signal is missing?
Alternative ways to view through apps
Xiaomi TVs with Android TV have alternative ways to view content from the operator without using a satellite antenna and access card. The official Tricolor Cinema and TV app allows you to watch TV channels and movies over the Internet. This solution is ideal for those who do not have the ability to install an antenna or who want to watch TV in different rooms without additional consoles.
To install the app, open the Google Play Store on your TV. Search for Tricolor and find the official app. Once installed, launch it and log in using your personal account. If you don't have an account, you can create it on the operator's website by linking a phone number.
| Method | Requirements | Quality. | Internet dependency |
|---|---|---|---|
| Satellite (CAM) | Antenna, module | HD / Full HD | No. |
| Prefix. | Antenna, receiver | 4K / Ultra HD | Partially (for interactive) |
| Annex | Wi-Fi / LAN | Depends on speed. | Yes (required) |
The advantage of the app is that it can use the "Pause" feature on live channels and access to a vast library, but it is worth considering that broadcasting over the Internet can have a real-time delay of 30 seconds to several minutes, which can be critical when watching sports events when neighbors are already celebrating a goal and you have a ball still flying to the goal.
Problem solving and troubleshooting
Users may encounter a variety of technical difficulties in setting up the setup process. One of the common problems on Xiaomi TVs is the lack of sound when switching to the new setup. HDMI-In this case, check the audio settings in the TV menu: the output format should be set to Auto or PCM, Some older receivers do not support Dolby Digital surround sound through the HDMI non-decode.
Another common problem is that the image is periodically lost or the image is scattered into squares, which often indicates poor cable contact or insufficient satellite signal level, see if the F connectors are tightly twisted, and if the cable is laid long ago, it may have lost its properties under the influence of ultraviolet light and temperature changes, making it rigid and brittle.
⚠️ Warning: Never cut the antenna cable under the root if the signal is gone. First, check the connections and settings. Incorrect trimming and stripping of the cable can permanently disrupt the wave resistance and finish off the weak signal.
If Xiaomi TV doesn’t see CAM-module, try to remove it, wipe the contacts of the card with a dry soft cloth and insert again, making sure that the module is in until the end. Sometimes it helps to reset your TV settings to factory settings, but before that remember or take a picture of the current settings of the Wi-Fi network, as they will have to be re-entered.
💡
The stability of satellite TV on Xiaomi depends primarily on the quality of the cable and the correct configuration of the converter, and not on the model of the TV.