How to connect Xiaomi TV to your computer via HDMI: full instructions with solutions

Connecting a Xiaomi TV to a computer via HDMI is an easy way to turn a large screen into a monitor for work, games or viewing content. However, even in this standard process, users often face nuances from choosing the right cable to adjusting resolution and sound, especially for Mi TV 4/5, Redmi Smart TV and Xiaomi TV A Pro models, where the settings may differ from classic smart TVs of other brands.

In this article, we will look at all the stages of connection, from the physical connection to the software setup, and also solve the typical problems: why there is no image, how to turn on the sound via HDMI and what to do if the TV does not detect the signal, and focus on optimizing images for different tasks: office work, streaming video or high FPS games.

If you’ve never connected a Xiaomi TV to a PC before, start with the cable selection section, which will save you 80% of potential problems. Power users can immediately go to the troubleshooting section, where you can find solutions for specific bugs.

What? HDMI-cable is needed to connect Xiaomi TV computer-to-computer

The first and most important step is choosing the cable. HDMI-The cables are the same, and for modern Xiaomi TVs (especially with resolution). 4K 120 Hz cable is required with support HDMI 2.0 or 2.1. Here are the key criteria:

• 🔌 Version. HDMI: For Full. HD (1080p) fit HDMI 1.4, but 4K@60Hz higher HDMI 2.0/2.1. Models of Mi TV Q2 75" Redmi Max 98" demand HDMI 2.1 full support 4K@120Hz.
• 📏 Cable length: Up to 3 meters - no signal amplifier, above - look for cables labeled "Active" or "Redmere" (for 5)+ meters).
• 🛡️ Certification: Original cables have a logo HDMI Certified on packaging: Counterfeiting may not transmit sound or maintain low resolution.
• 🔄 Direction: Xiaomi has TV connector HDMI It's usually on the side or back, so make sure the cable doesn't overburden under the weight of the TV.

For gamers and owners of graphics cards NVIDIA RTX 30/40 series or AMD RX 6000/7000 critical support HDMI 2.1 — only it allows you to output 4K@120Hz with VRR (variable refresh rate). If your cable is older than 2018, most likely, it will not pull such loads.

⚠️ Attention: Some Xiaomi models TV (Like Mi. TV 4S 55′′ 2019′′ have only one port HDMI 2.0 (usually marked as HDMI 3 or ARC). Connect the cable to it for maximum resolution.

Physical Connection: Where to Insert Cable on TV and PC

Now, the connection itself, and the process seems obvious, but there are some nuances that affect signal stability.

1. Turn off both devices, and this will prevent power surges when connected, especially for Xiaomi TVs with a high-speed connection. AMOLED-matrices (e.g. Mi) TV Master OLED), nutrient-sensitive.
2. Connect the cable to the port HDMI It's the best choice: 🎮 For games: port HDMI 2.1 (if). 🎥 For movies: port marked ARC/eARC (It sends the sound back to the soundbar). 🖥️ For office work: any free port.

Connect the second end of the cable to your computer. On laptops and PCs, HDMI ports can be:

• 💻 Built-in (on the motherboard) - usually HDMI 1.4.
• 🎯 On a video card — HDMI 2.0/2.1 (priority).
• Turn on your TV and PC. Use the Xiaomi remote to select the source of the signal (SOURCE or INPUT button).

For Xiaomi TVs with Dolby Atmos (e.g. Mi TV Q1 75) in the TV sound settings (Settings → Sound → Sound Format), select Auto or Passthrough to transmit multichannel audio without compression.

⚠️ Warning: If the sound is interrupted or delayed, check if the TV is in Lipsinc mode (Settings) → Sound. → Sound synchronization. Sound synchronization is better for games and video.

Optimizing the image for different tasks

The default settings rarely give the perfect picture, and depending on the task (games, movies, work) the settings need to be adjusted.

For games (console or PC):

• 🎮 Turn on the game mode on the TV (Settings) → Image: → Image mode → This reduces the input lag to 10-15 miss.
• 🔍 Turn off all post-processing: Noise suppression, MEMC, Dynamic contrast.
• 🎯 Set the permit. 4K@120Hz (if supported) or 1440p@120Hz Balance quality and productivity.

For the movies:

• 🎬 Select Mode of Movies or HDR (if the content is supported).
• 🌈 Enable Local Dimming (for Full Array models) LED lighting).
• 🔊 Adjust the sound to Dolby Atmos or DTS:X (if there is support).

For office work:

• 📄 Use the regimen. PC or Text for font clarity.
• 🔍 Set the color temperature. 6500K (white-neutral).
• 🖥️ Turn off Auto Brightness to avoid flickering in static images.

For Xiaomi models TV s OLED-screen (e.g., Mi) TV Master OLED) It is important to disable the screensaver and Automatic dimming in the screen settings to avoid pixel burnout during prolonged operation.

💡

For games on a PC with a Xiaomi TV, be sure to turn on G-Sync/FreeSync in your graphics card settings (if the TV supports).

Problem Solving: No image, sound, or blurred picture

Even with the right connection, there can be problems, and here are the most common solutions.

1. No image (black screen)

• 🔌 Check if the cable is in the correct port. HDMI (Some models of Xiaomi only HDMI 1 HDMI 3 supportive PC-signal).
• 💻 On PC, press Win. + Ctrl + Shift + B – This will restart the graphics driver.
• 🔄 Switch the signal source on the TV (button) SOURCE remote).
• 🔧 Update the graphics card driver (especially relevant for Intel Arc and AMD Radeon 7000).

2.No sound through HDMI

• 🔊 Make sure that in the sound settings Windows/macOS Selected TV as output device.
• 🔄 Reboot the TV (on some Xiaomi models, sound through the phone) HDMI activated only after rebooting).
• 🛠️ Check if the sound on the TV is turned off (Mute button on the remote control).
• 📻 In the TV settings (Settings) → Sound. → Entrance HDMI) choose PCM auto.

3. Blurred text or artifacts

• 📏 Set your native TV resolution (for example, 3840×2160 for 4K).
• 🎨 In Windows settings, select the color format RGB (Not YCbCr 4:2:2).
• 🔍 Turn off the game zoom (Render Scale should be 100%).
• 🖥️ For MacBooks with chips M1/M2 Try to connect through the adapter USB-C → HDMI supportive 4K@60Hz.

4.The TV doesn't see the PC

• 🔌 Try another one. HDMI-port on the TV (some ports may be occupied by the ARC or CEC).
• 💻 On PC, turn off/on the second monitor with Win + P.
• 🔄 Turn off the TV from the socket for 1 minute (cache reset) HDMI).
• 🛠️ Update the TV firmware (Settings) → On TV. → Updating the system).

If the problem persists, check the cable on another device (e.g., connect a console or other PC to it), and if there is an image, the problem is with your computer settings.

Advanced settings: HDR, VRR and remote control

For advanced users, Xiaomi TV offers additional features that can be activated when connecting to a PC.

HDR (High Dynamic Range):

• 🌈 Make sure your TV supports you. HDR10 Dolby Vision (check in Settings) → Image: → HDR).
• 💻 On the PC, turn it on. HDR in Parameters → System system → Display. → Parameters HDR.
• 🎮 For games on Steam or Epic Games, turn on HDR play-time.

VRR (Variable Refresh Rate):

• 🎯 Check FreeSync or G-Sync support for your Xiaomi model TV (Like Mi. TV Q2 65 supports FreeSync Premium).
• 💻 Turn it on. VRR in the settings of the video card: For NVIDIA: Control panel NVIDIA → Display. → Setting up the G-Sync. AMD: AMD Adrenalin → Display. → Radeon FreeSync.
• 🔧 On the TV, activate it. HDMI VRR In Settings → Image: → Additionally.

Control of PC from the Xiaomi remote:

• 🖱️ Turn it on. HDMI-CEC on the TV (Settings) → System system → Device management → HDMI-CEC).
• 💻 On the PC, install the driver HDMI-CEC (LibCEC for Windows, for example).
• 🎮 Now the buttons of the Xiaomi remote will work as media keys (volume, pause, rewind).