Connecting Xiaomi TVs to antennas is a challenge faced by owners of both new and used models. Despite the fact that modern smart TVs offer hundreds of online services, terrestrial and cable TV remain relevant for watching local channels, news or sports without delay. However, not all users know how to properly connect the antenna cable to the TV, configure channel search and avoid typical errors.
In this article, we will discuss all ways of connecting – from a standard coaxial connector to using external tuners for models without a built-in receiver. You will learn what cables and adapters you will need, how to set up automatic and manual channel search, and what to do if the TV does not find the signal. TV A2, Mi TV P1 mi TV Q2, where the location of the connectors and the settings menu may differ.
If you have just bought a Xiaomi TV or are planning to switch from a different brand, this guide will save time and avoid contacting the service center. All steps are illustrated with screenshots of current firmware versions (2026) and take into account regional broadcasting features in Russia, Ukraine, Kazakhstan and other CIS countries.
1. Compatibility Check: Does your Xiaomi TV have a built-in tuner?
Before you buy cables or antennas, make sure your Xiaomi TV supports on-air or cable TV. Most models have built-in TV. DVB-T/T2/C-smacking, but there are exceptions:
- ✅ Supported by: Mi Series TV A2, Mi TV P1, Mi TV Q1/Q2, Mi TV 4S/4A (all modifications after 2019 year-end).
- ⚠️ Limited support: Mi TV 3S (only DVB-T, without T2) some OEM-Models for Foreign Markets.
- ❌ Not supported: Xiaomi Mi Surface Display monitors and Mi Projector projectors (requires an external tuner).
To determine the exact presence of the tuner:
- Take the remote and press the Menu button (or Settings on the new remotes).
- Go to Settings → Device → About TV.
- Scroll to the section Technical specifications - there should be a TV tuner item: DVB-T/T2/C.
If the specifications do not mention the tuner, you will need an external receiver (for example, Xiaomi Mi Box S with support). DVB-T2 Please note that even if there is a tuner, in some regions it may be necessary to CAM-module for decoding pay channels (for example, Tricolor TV or NTV-Plus).
⚠️ Xiaomi TVs purchased in China (models with suffix) CN), They often do not support European broadcasting standards. DVB-T2. Before buying, check the region in the characteristics!
2 What cables and adapters will you need?
To connect the antenna to the Xiaomi TV, you will need:
| Component | Appointment | Example/photo | Notes |
|---|---|---|---|
| Coaxial cable (RG-6) | Transfer of signal from antenna to TV | White or black cable with an F connector | Length up to 10 m - without amplifier, above - with amplifier |
| F-connector (Daddy) | Connecting a cable to an antenna or TV | Metallic screw-up | Make sure you have good contact = bad contact! |
| F-IEC transient | Adaptation of the connector to the TV entrance | Short, threaded adapter | If you need to get the IEC on TV, not the F. |
| Signal amplifier | Improvement of weak signal | Power box with 5V/12V power | Relevant for remote areas from the tower |
The standard antenna input on Xiaomi TVs is the IEC 60169-2 connector (round, with a central pin). If your cable ends with an F connector (as most modern antennas do), you will need an F-IEC adapter. It can be bought from any electronics store for 50-150 rubles.
💡
If you live in an apartment building with a collective antenna, check if there's a signal amplifier on the staircase, and sometimes you just need to connect directly to it without having to use an additional antenna.
For Mi owners TV A2 43" and Mi TV P1 55" important: antenna input is located on the back panel on the left (when viewed from the back), next to the HDMI-In the Mi models. TV Q2 The connector can be hidden under the removable cover - look for the icon 📡.
3. Step-by-step instruction: how to physically connect the antenna?
Follow this algorithm to connect the antenna to the TV correctly:
☑️ Connecting antenna to Xiaomi TV
- Turn off the TV. This will prevent static electricity from damaging the ports.
- Connect the cable to the antenna: If the antenna is room, insert the cable into the ANT IN connector. If the external one, make sure that the cable is securely fixed to the mast and not bent.
Lay the cable.
Connect the cable to the TV:
- If the TV connector is IEC, swipe the F-IEC adapter onto the cable, then insert it into the TV.
- If the connector is F, connect the cable directly.
- Secure the cable with screeds or clips so that it does not hang out and create tension on the connector.
- Choose a country: Russia for Russia, Ukraine for Ukraine, etc. This is important for the correct placement of channels by number.
- Run the search with the OK button, and it takes 3-10 minutes.
- Set the transfer rate: 8 Mbps (for DVB-T2).
- Press Search. If there's a signal, the TV will find the channels.
⚠️ Note: On Xiaomi TVs with Google firmware TV (Like Mi. TV Q2 2026) Channel settings menu hidden deeper: Settings → Channels → Source → Antenna.Don't confuse it with the Applications section where streaming services are configured!
6. Signal optimization: how to improve reception?
If the channels are disturbed or periodically disappear, try the following ways to improve the signal:
- 📶 Position antenna: Point the antenna towards the nearest TV tower (see RTRS website). Raise the antenna higher - even 1-2 meters can significantly improve reception.
- 🔌 Amplifier: For indoor antennas, an amplifier with a factor of 15-20 dB (for example, Locus L 0321) is suitable. For outdoor antennas, 30 dB and higher (but not more than 40 dB, otherwise there will be interference).
- 🛠️ Replace the cable: If the cable is older than 5 years, replace it with a new one RG-6 Avoid cheap aluminum cables, which oxidize quickly.
- 📵 Interference Removal: Disable nearby 2.4GHz devices (Wi-Fi routers, wireless phones) and use ferrite rings on the cable to suppress high-frequency tips.
For apartment dwellers, if you have a collective antenna but the signal is weak, contact the management company. Often the problem lies in worn-out roof equipment that requires replacement or adjustment.
💡
If you live in low-signal areas, consider connecting satellite TV (like Tricolor or NTV Plus) and you'll need a satellite dish and a receiver, but the image quality will be stable even in remote areas.
7. Alternative ways to connect TV without antenna
If you can’t connect the antenna or it’s not practical, consider alternative TV viewing options on Xiaomi TV:
- 📡 Satellite TV: Requires a plate, converter and receiver (e.g., a receiver, GS U510). Supports HD-quality and hundreds of channels, but you need to customize the plate.
- 🌍 IPTV: Connects via the Internet (you need a high-speed tariff from 30 Mbit / s). Popular providers: Wink, MTS TV, Rostelecom TV. Setting up: install the provider application from Google Play on your TV.
- 📱 Mobile TV: Use it USB-modem (e.g. Huawei) E3372) and SIM-You can install an unlimited rate card, or you can install an online TV app or a Peers.TV app.
- 🖥️ PC TV tuner: Connect an external tuner (such as AVerMedia) to your computer and then stream the picture to Miracast or TV. HDMI.